UPSTREAM RIGHTS (CONFLICTING NOTICES)
Source-Robotics/MSG-compliant-AI-stepper-gripper, commit ca47db35ccb35dbcc33985367f76899fb4804d5a (MSG gripper by Petar Crnjak / Source Robotics). The root LICENSE file is the "CERN Open Hardware Licence Version 2 - Strongly Reciprocal" (https://ohwr.org/cern_ohl_s_v2.txt) and the README states "Project is under [CERN Open Hardware Licence Version 2 - Strongly Reciprocal]". MSG_gripper_description/readme.md states "This model is released under an [Apache-2.0 License](LICENSE)", but MSG_gripper_description contains no LICENSE file. The URDF package.xml that accompanies the previewed URDF declares "BSD" (a SolidWorks-to-URDF exporter default). The repository does not say which notice governs the robot description.
The exporter log (MSG_gripper_description/URDF/msg_gripper/export.log, SW2URDF 1.6) records that the gripper link mesh was built from SolidWorks components named MSG_Gripper_body_150mm, linearguide_150mm, 17HS08-1004S, MGN7C (two), OV9732_camera, camera extension, camera_lid, connectorFemaleFlange, connector_lid, jaw_blocker (two), stepper_gripper_cover_CAMERA and ring_cover, and each jaw mesh from linear_track_URDF and solid_jaws_pinch of the URDF_SSG48_assem (SSG-48 gripper) assembly. Purchased components (stepper motor, linear guide, carriages, camera) are kept as modeled; their third-party terms are not stated.
Under the user decision of October 4, 2026 for ambiguous licenses, Open Source Robotics hosts the unchanged MSG_gripper_description folder (URDF package, exporter log, MJCF files and meshes) with the root LICENSE, README and safety disclaimer in a ZIP bundle, and a triangulated preview of PAR6_MSG.urdf at zero joint positions, with attribution to Petar Crnjak / Source Robotics. The preview is offered under the strictest reading, CERN-OHL-S-2.0. No manufacturing, redistribution or other clearance is claimed beyond what the source states.
--- UPSTREAM LICENSE ---
CERN Open Hardware Licence Version 2 - Strongly Reciprocal
Preamble
CERN has developed this licence to promote collaboration among
hardware designers and to provide a legal tool which supports the
freedom to use, study, modify, share and distribute hardware designs
and products based on those designs. Version 2 of the CERN Open
Hardware Licence comes in three variants: CERN-OHL-P (permissive); and
two reciprocal licences: CERN-OHL-W (weakly reciprocal) and this
licence, CERN-OHL-S (strongly reciprocal).
The CERN-OHL-S is copyright CERN 2020. Anyone is welcome to use it, in
unmodified form only.
Use of this Licence does not imply any endorsement by CERN of any
Licensor or their designs nor does it imply any involvement by CERN in
their development.
1 Definitions
1.1 'Licence' means this CERN-OHL-S.
1.2 'Compatible Licence' means
a) any earlier version of the CERN Open Hardware licence, or
b) any version of the CERN-OHL-S, or
c) any licence which permits You to treat the Source to which
it applies as licensed under CERN-OHL-S provided that on
Conveyance of any such Source, or any associated Product You
treat the Source in question as being licensed under
CERN-OHL-S.
1.3 'Source' means information such as design materials or digital
code which can be applied to Make or test a Product or to
prepare a Product for use, Conveyance or sale, regardless of its
medium or how it is expressed. It may include Notices.
1.4 'Covered Source' means Source that is explicitly made available
under this Licence.
1.5 'Product' means any device, component, work or physical object,
whether in finished or intermediate form, arising from the use,
application or processing of Covered Source.
1.6 'Make' means to create or configure something, whether by
manufacture, assembly, compiling, loading or applying Covered
Source or another Product or otherwise.
1.7 'Available Component' means any part, sub-assembly, library or
code which:
a) is licensed to You as Complete Source under a Compatible
Licence; or
b) is available, at the time a Product or the Source containing
it is first Conveyed, to You and any other prospective
licensees
i) as a physical part with sufficient rights and
information (including any configuration and
programming files and information about its
characteristics and interfaces) to enable it either to
be Made itself, or to be sourced and used to Make the
Product; or
ii) as part of the normal distribution of a tool used to
design or Make the Product.
1.8 'Complete Source' means the set of all Source necessary to Make
a Product, in the preferred form for making modifications,
including necessary installation and interfacing information
both for the Product, and for any included Available Components.
If the format is proprietary, it must also be made available in
a format (if the proprietary tool can create it) which is
viewable with a tool available to potential licensees and
licensed under a licence approved by the Free Software
Foundation or the Open Source Initiative. Complete Source need
not include the Source of any Available Component, provided that
You include in the Complete Source sufficient information to
enable a recipient to Make or source and use the Available
Component to Make the Product.
1.9 'Source Location' means a location where a Licensor has placed
Covered Source, and which that Licensor reasonably believes will
remain easily accessible for at least three years for anyone to
obtain a digital copy.
1.10 'Notice' means copyright, acknowledgement and trademark notices,
Source Location references, modification notices (subsection
3.3(b)) and all notices that refer to this Licence and to the
disclaimer of warranties that are included in the Covered
Source.
1.11 'Licensee' or 'You' means any person exercising rights under
this Licence.
1.12 'Licensor' means a natural or legal person who creates or
modifies Covered Source. A person may be a Licensee and a
Licensor at the same time.
1.13 'Convey' means to communicate to the public or distribute.
2 Applicability
2.1 This Licence governs the use, copying, modification, Conveying
of Covered Source and Products, and the Making of Products. By
exercising any right granted under this Licence, You irrevocably
accept these terms and conditions.
2.2 This Licence is granted by the Licensor directly to You, and
shall apply worldwide and without limitation in time.
2.3 You shall not attempt to restrict by contract or otherwise the
rights granted under this Licence to other Licensees.
2.4 This Licence is not intended to restrict fair use, fair dealing,
or any other similar right.
3 Copying, Modifying and Conveying Covered Source
3.1 You may copy and Convey verbatim copies of Covered Source, in
any medium, provided You retain all Notices.
3.2 You may modify Covered Source, other than Notices, provided that
You irrevocably undertake to make that modified Covered Source
available from a Source Location should You Convey a Product in
circumstances where the recipient does not otherwise receive a
copy of the modified Covered Source. In each case subsection 3.3
shall apply.
You may only delete Notices if they are no longer applicable to
the corresponding Covered Source as modified by You and You may
add additional Notices applicable to Your modifications.
Including Covered Source in a larger work is modifying the
Covered Source, and the larger work becomes modified Covered
Source.
3.3 You may Convey modified Covered Source (with the effect that You
shall also become a Licensor) provided that You:
a) retain Notices as required in subsection 3.2;
b) add a Notice to the modified Covered Source stating that You
have modified it, with the date and brief description of how
You have modified it;
c) add a Source Location Notice for the modified Covered Source
if You Convey in circumstances where the recipient does not
otherwise receive a copy of the modified Covered Source; and
d) license the modified Covered Source under the terms and
conditions of this Licence (or, as set out in subsection
8.3, a later version, if permitted by the licence of the
original Covered Source). Such modified Covered Source must
be licensed as a whole, but excluding Available Components
contained in it, which remain licensed under their own
applicable licences.
4 Making and Conveying Products
You may Make Products, and/or Convey them, provided that You either
provide each recipient with a copy of the Complete Source or ensure
that each recipient is notified of the Source Location of the Complete
Source. That Complete Source is Covered Source, and You must
accordingly satisfy Your obligations set out in subsection 3.3. If
specified in a Notice, the Product must visibly and securely display
the Source Location on it or its packaging or documentation in the
manner specified in that Notice.
5 Research and Development
You may Convey Covered Source, modified Covered Source or Products to
a legal entity carrying out development, testing or quality assurance
work on Your behalf provided that the work is performed on terms which
prevent the entity from both using the Source or Products for its own
internal purposes and Conveying the Source or Products or any
modifications to them to any person other than You. Any modifications
made by the entity shall be deemed to be made by You pursuant to
subsection 3.2.
6 DISCLAIMER AND LIABILITY
6.1 DISCLAIMER OF WARRANTY -- The Covered Source and any Products
are provided 'as is' and any express or implied warranties,
including, but not limited to, implied warranties of
merchantability, of satisfactory quality, non-infringement of
third party rights, and fitness for a particular purpose or use
are disclaimed in respect of any Source or Product to the
maximum extent permitted by law. The Licensor makes no
representation that any Source or Product does not or will not
infringe any patent, copyright, trade secret or other
proprietary right. The entire risk as to the use, quality, and
performance of any Source or Product shall be with You and not
the Licensor. This disclaimer of warranty is an essential part
of this Licence and a condition for the grant of any rights
granted under this Licence.
6.2 EXCLUSION AND LIMITATION OF LIABILITY -- The Licensor shall, to
the maximum extent permitted by law, have no liability for
direct, indirect, special, incidental, consequential, exemplary,
punitive or other damages of any character including, without
limitation, procurement of substitute goods or services, loss of
use, data or profits, or business interruption, however caused
and on any theory of contract, warranty, tort (including
negligence), product liability or otherwise, arising in any way
in relation to the Covered Source, modified Covered Source
and/or the Making or Conveyance of a Product, even if advised of
the possibility of such damages, and You shall hold the
Licensor(s) free and harmless from any liability, costs,
damages, fees and expenses, including claims by third parties,
in relation to such use.
7 Patents
7.1 Subject to the terms and conditions of this Licence, each
Licensor hereby grants to You a perpetual, worldwide,
non-exclusive, no-charge, royalty-free, irrevocable (except as
stated in subsections 7.2 and 8.4) patent licence to Make, have
Made, use, offer to sell, sell, import, and otherwise transfer
the Covered Source and Products, where such licence applies only
to those patent claims licensable by such Licensor that are
necessarily infringed by exercising rights under the Covered
Source as Conveyed by that Licensor.
7.2 If You institute patent litigation against any entity (including
a cross-claim or counterclaim in a lawsuit) alleging that the
Covered Source or a Product constitutes direct or contributory
patent infringement, or You seek any declaration that a patent
licensed to You under this Licence is invalid or unenforceable
then any rights granted to You under this Licence shall
terminate as of the date such process is initiated.
8 General
8.1 If any provisions of this Licence are or subsequently become
invalid or unenforceable for any reason, the remaining
provisions shall remain effective.
8.2 You shall not use any of the name (including acronyms and
abbreviations), image, or logo by which the Licensor or CERN is
known, except where needed to comply with section 3, or where
the use is otherwise allowed by law. Any such permitted use
shall be factual and shall not be made so as to suggest any kind
of endorsement or implication of involvement by the Licensor or
its personnel.
8.3 CERN may publish updated versions and variants of this Licence
which it considers to be in the spirit of this version, but may
differ in detail to address new problems or concerns. New
versions will be published with a unique version number and a
variant identifier specifying the variant. If the Licensor has
specified that a given variant applies to the Covered Source
without specifying a version, You may treat that Covered Source
as being released under any version of the CERN-OHL with that
variant. If no variant is specified, the Covered Source shall be
treated as being released under CERN-OHL-S. The Licensor may
also specify that the Covered Source is subject to a specific
version of the CERN-OHL or any later version in which case You
may apply this or any later version of CERN-OHL with the same
variant identifier published by CERN.
8.4 This Licence shall terminate with immediate effect if You fail
to comply with any of its terms and conditions.
8.5 However, if You cease all breaches of this Licence, then Your
Licence from any Licensor is reinstated unless such Licensor has
terminated this Licence by giving You, while You remain in
breach, a notice specifying the breach and requiring You to cure
it within 30 days, and You have failed to come into compliance
in all material respects by the end of the 30 day period. Should
You repeat the breach after receipt of a cure notice and
subsequent reinstatement, this Licence will terminate
immediately and permanently. Section 6 shall continue to apply
after any termination.
8.6 This Licence shall not be enforceable except by a Licensor
acting as such, and third party beneficiary rights are
specifically excluded.
--- UPSTREAM README.md ---
> [!CAUTION]
> The gripper is still in BETA release meaning it will have some bugs from hardware to software!
>
## 📖 Project Overview
The **MSG compliant AI stepper gripper** is built around [StepFOC stepper drivers](https://source-robotics.com/products/stepfoc-stepper-controller), which enable precise FOC-based force control on standard stepper motors. This makes it well-suited for assembly tasks, human-robot collaboration, and AI data collection applications — including embodied AI, teleoperation, and VLA training — thanks to its camera-friendly design.
**The gripper is modular in two key ways:**
| Option | Variants | Notes |
|--------|----------|-------|
| Rail length | 100 mm, 150 mm, 200 mm | Determines maximum grip span |
| Stepper length | 21.5 mm, 40 mm, 60 mm | Determines maximum grip force output |
**All mechanical files, firmware, and software are open source, allowing you to attach a custom gripping tool and integrate the gripper with any robotic arm or platform.**
## ⚒️How to build / Where to buy?
You can buy MSG gripper on our website: https://source-robotics.com/products/msg-gripper
If you want to Source all the parts yourself and build your own follow these steps:
Print files from the STEP files folder based on your chosen configuration:
| Rail Size | Folders to Print |
|-----------|------------------|
| 100 mm | [Common parts](STEP%20files/Common%20parts) + [Linear rail dependant parts/100mm rail](STEP%20files/Linear%20rail%20dependant%20parts/100mm%20rail) + [Stepper dependant parts/\](STEP%20files/Stepper%20dependant%20parts) |
| 150 mm | [Common parts](STEP%20files/Common%20parts) + [Linear rail dependant parts/150mm rail](STEP%20files/Linear%20rail%20dependant%20parts/150mm%20rail) + [Stepper dependant parts/\](STEP%20files/Stepper%20dependant%20parts) |
| 200 mm | [Common parts](STEP%20files/Common%20parts) + [Linear rail dependant parts/200mm rail](STEP%20files/Linear%20rail%20dependant%20parts/200mm%20rail) + [Stepper dependant parts/\](STEP%20files/Stepper%20dependant%20parts) |
* Source all the parts from the [BOM](https://github.com/PCrnjak/MSG-compliant-AI-stepper-gripper/blob/main/BOM.md)
* Follow [Assembly instructions ](https://youtu.be/EosuDy-heqM) or [Video instructions](https://youtu.be/EosuDy-heqM) to assemble your gripper
* Follow [DOCS](https://source-robotics.github.io/MSG-gripper-docs/) to get your gripper up and running.
## 📚Documentation:
| Resource | Description |
|----------|-------------|
| [Official website](https://source-robotics.com) | Buy the MSG gripper or explore other Source Robotics products |
| [DOCS](https://source-robotics.github.io/MSG-gripper-docs/) | Getting started, wiring, configuration, and full API reference |
| [Python API](https://github.com/PCrnjak/Spectral-BLDC-Python/tree/main) | Control the gripper from Python over CAN bus |
| [BOM](https://github.com/PCrnjak/MSG-compliant-AI-stepper-gripper/blob/main/BOM.md) | Complete list of parts needed to build the gripper |
| [Building instructions *(coming soon)*](https://github.com/PCrnjak/MSG-compliant-AI-stepper-gripper/tree/main/Building%20instructions) | Mechanical assembly walkthrough |
| [URDF & MJCF files](/MSG_gripper_description/) | Ready-to-use robot description files for ROS2, Gazebo, and MuJoCo |
| [ROS2 package — MSG gripper](https://github.com/BiomechatronicsLab/source_robotics_msg_gripper_ros2) | ROS2 driver and example nodes for the MSG gripper |
| [ROS2 package — SSG48 gripper](https://github.com/Lass6230/ssg48_adaptive_electric_gripper_ros2) | ROS2 driver and example nodes for the SSG48 gripper (Should work with MSG also) |
## 💻Quick start code example
```python
import Spectral_BLDC as Spectral
import time
Communication1 = Spectral.CanCommunication(bustype='slcan', channel='COM20', bitrate=1000000)
Motor1 = Spectral.SpectralCAN(node_id=0, communication=Communication1)
Motor1.Send_Clear_Error()
Motor1.Send_gripper_calibrate()
time.sleep(4)
temp_var = 0
while True:
if temp_var == 0:
Motor1.Send_gripper_data_pack(50,100,700,1,1,0,0)
temp_var = 1
elif temp_var == 1:
Motor1.Send_gripper_data_pack(240,100,700,1,1,0,0)
temp_var = 0
message, UnpackedMessageID = Communication1.receive_can_messages(timeout=0.2)
if message is not None:
print(f"Message is: {message}")
print(f"Node ID is : {UnpackedMessageID.node_id}")
print(f"Message ID is: {UnpackedMessageID.command_id}")
print(f"Error bit is: {UnpackedMessageID.error_bit}")
print(f"Timestamp is: {message.timestamp}")
time.sleep(3)
```
## 🌐 More about MSG gripper
| YouTube | Instagram | Twitter | LinkedIn |
|--------|-----------|---------|----------|
| [](https://www.youtube.com/@source-robotics) | [](https://www.instagram.com/source_robotics/) | [](https://twitter.com/SourceRobotics) | [](https://www.linkedin.com/company/source-robotics) |
| Discord | Forum | Hackaday | Blog |
|--------|-------|------| ------|
| [](https://discord.com/invite/prjUvjmGpZ) | [](https://discourse.source-robotics.com/) | [](https://hackaday.io/project/191860-parol6-desktop-robotic-arm) | [](https://source-robotics.com/blogs/blog)
## ⚠️ Safety, Liability & Disclaimer
This project includes experimental software, hardware designs, and assembly documentation that are still under development and may contain bugs, errors, or incomplete features. By using, building, or modifying this project, you acknowledge that:
* You use this project entirely at your own risk
* You are solely responsible for safe assembly, testing, and operation
* No guarantee is made regarding correctness, safety, or reliability
* The authors are not responsible for any damage, injury, or loss resulting from the use or misuse of this project
* Hardware performance and safety depend on user assembly, component quality, calibration, and handling, which cannot be guaranteed
* This project is provided “as is.” If you choose to build a device yourself using these files, designs, or instructions, you do so without any warranties or guarantees, including regarding safety, reliability, or suitability for any particular purpose.
THIS PROJECT INVOLVES LETHAL VOLTAGES AND OTHER SERIOUS HAZARDS THAT CAN CAUSE SEVERE INJURY. YOU MUST READ THE FULL [SAFETY WARNING AND DISCLAIMER DOCUMENT](SAFETY_WARNING_AND_DISCLAIMER.md) BEFORE USING ANY PROJECT FILES. BY PROCEEDING, YOU ACKNOWLEDGE AND ACCEPT ALL RISKS AND AGREE TO USE THIS PROJECT ENTIRELY AT YOUR OWN RESPONSIBILITY.
## 💸Support us
The majority of this project is open source and freely available to everyone. Your assistance, whether through donations or advice, is highly valued. Thank you!
[](https://paypal.me/PCrnjak?locale.x=en_US)
[](https://www.patreon.com/PCrnjak)
## 🛡️ Licensing
Project is under [CERN Open Hardware Licence Version 2 - Strongly Reciprocal](https://github.com/PCrnjak/MSG-compliant-AI-stepper-gripper?tab=CERN-OHL-S-2.0-1-ov-file)
--- UPSTREAM MSG_gripper_description/readme.md ---
# Source Robotics MSG gripper Description (MJCF) & URDF
> [!IMPORTANT]
> Requires MuJoCo 3.1.3 or later.
## Changelog
See [CHANGELOG.md](./CHANGELOG.md) for a full history of changes.
## Overview
This package contains a simplified robot description (MJCF) and URDF files of the [MSG gripper](https://source-robotics.com/products/msg-gripper) developed by [Source Robotics](https://source-robotics.com/).
There are 2 available MJCF files.
## Online mujoco viewer
https://mujoco-viewer.org/
## URDF folder
[URDF](./URDF/) folder contains:
* MSG gripper
More about URDF here: [Link](./urdf.md)
## URDF → MJCF derivation steps
1. Loaded the URDF into MuJoCo and saved a corresponding MJCF.
2. Manually edited the MJCF to extract common properties into the `` section.
3. Added position-controlled actuators for the arm.
4. Added `scene.xml` which includes the robot, with a textured groundplane, skybox, and haze.
## License
This model is released under an [Apache-2.0 License](LICENSE).
## References
Mjcf reference Mujoco managerie
- references:
- https://mujoco.readthedocs.io/en/stable/XMLreference.html
- https://github.com/google-deepmind/mujoco_menagerie/tree/main/ufactory_lite6
- https://github.com/google-deepmind/mujoco_menagerie/blob/main/trossen_vx300s/vx300s.xml
- https://github.com/google-deepmind/mujoco_menagerie/blob/main/aloha/aloha.xml
- https://github.com/google-deepmind/mujoco_menagerie/blob/main/franka_emika_panda/panda.xml
- https://github.com/jeongeun980906/lerobot-mujoco-tutorial/blob/master/asset/robotis_omy/omy.xml
--- UPSTREAM MSG_gripper_description/URDF/msg_gripper/package.xml ---
msg_gripper
1.0.0
URDF Description package for MSG Gripper
This package contains configuration data, 3D models and launch files
for the MSG gripper
TODO
BSD
catkin
roslaunch
robot_state_publisher
rviz
joint_state_publisher_gui
gazebo