ALOHA
Robot / hardware buildA four-arm bimanual teleoperation and demonstration-recording system with a separate learning stack. [1]
Build & first use →Official website
- For
- Robot-learning labs with Interbotix and ROS experience [1]
- Cost
- No current cost or bill of materials established yet.
- Source rights
- Named licenses are documented by part. Review licenses
- Unknowns
- tools, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details
Overview
This ALOHA repository provides teleoperation and data collection for four arms and four cameras. The hardware assembly tutorial is a separate document, and training imitation-learning models requires the separate ACT project. Copying this repository alone does not preserve a complete robot build or learning environment. [1]
The upstream guide calls for at least six USB 3 ports: four direct connections for the robots and two for cameras. It reports unstable multi-arm connections on some hosts, rejects hubs and extensions for the robot links, and limits cameras to two per hub. These are practical host-selection constraints even before training compute is considered. [1]
Follow the device-identity section when planning the setup: fixed aliases distinguish left/right leader and follower arms and the four cameras. The pinned guide reports Ubuntu 18.04 and 20.04 with ROS 1 Noetic and specifies a Python 3.8.10 Conda environment; these historical combinations have not been reproduced here. ROS 2 compatibility is described as ongoing work. Interbotix software is another required external dependency, including a documented change to its arm.py file to avoid forward-kinematics computation delaying teleoperation; see the upstream software-installation section before freezing that dependency. It also warns that torque-off arms can collapse because the joints have no automatically engaged brakes. [1]
The software is MIT-licensed; that does not establish rights to manufacture every purchased arm component. Current full-setup cost, dependency compatibility and our support effort remain unknown. We have not run teleoperation, recorded an episode or tested this hardware. [3]
Is this for you?
- Known limitations
- Robot connections should not use USB hubs or extensions in the documented setup
- No more than two cameras per hub in the upstream guidance
- Torque-off arms have no automatically engaged joint brakes
What you need
Hardware & parts
- Hardware configuration
Two leader arms and two follower arms
Assembly & first use
Cost
No current, complete configuration-specific build cost has been established for this profile.
3D preview
Preview not available yet. Design-source links are available, but the reviewed record does not establish unambiguous reuse rights for a hosted CAD preview.
Model sources
Design-source links are available, but the reviewed record does not establish unambiguous reuse rights for a hosted CAD preview.
What we checked
Source research only; no installation, physical build or performance test performed. No affiliate links added.
Not yet established
- Requirements: operating system, tools
- A step-by-step setup summary
Updates
- Upstream last updated
- Apr 19, 2024 [2]
- Latest release
- Not established
- Profile updated
- Sep 30, 2026
- Sources last checked
- Sep 30, 2026
- Next review
- Oct 30, 2026
- Reviewed revision
- 06369f03cd8e0a47e16d3a90167853fd33af7557 (commit snapshot; no published stable release found) · combined hardware and software repository
Source files and licenses
Available project sources support research coverage; complete build and commercial qualification remain separate.
| Layer | Availability / license |
|---|---|
| mechanical design | not found · License not fully assessed No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4] |
| electronics | not found · License not fully assessed No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4] |
| firmware | not found · License not fully assessed No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4] |
| software | available · MIT Teleoperation and collection software only; external ACT, ROS and robot components have separate terms. [1] [4] [3] |
| documentation | available · MIT Repository documentation; linked hardware tutorial remains a separate artifact. [1] [4] [3] |
This profile covers the described physical configuration and control route without a particular learned policy or dataset.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
- S001 tonyzhaozh/aloha: README.md
Revision, date & where cited
github.com · revision
06369f0· Accessed Sep 30, 2026
Used for: Overview, Is this for you?, What you need, Hardware & parts and 2 more - S002 tonyzhaozh/aloha: commit 06369f0
- S003 tonyzhaozh/aloha: LICENSE
Revision, date & where cited
github.com · revision
06369f0· Accessed Sep 30, 2026
Used for: Overview, Source files and licenses - S004 tonyzhaozh/aloha: files
Revision, date & where cited
github.com · revision
06369f0· archive file inventory · Accessed Sep 30, 2026
Used for: Source files and licenses
Correction guidance · Discussion is not enabled · Profile format 0.5.0-draft.1