Open Source RoboticsRobots, software & learning

Asimov v0

Leg subassembly

Twelve-actuator bipedal leg set (lower body only) with articulated toes and a two-motor RSU ankle, published as STL simulation meshes, an MJCF model and an LFS-stored STEP assembly. [1] [5] [6]

Build & first use →Official website

For
Humanoid hardware developers able to source Encos actuators, MJF-printed parts and their own electronics and control stack [1] [6]
Cost
No current cost or bill of materials established yet.
Source rights
Named licenses are documented by part. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of Asimov v0 lower-body hardware during development, not a complete finished humanoid.
Upstream photograph of Asimov v0 lower-body hardware during development, not a complete finished humanoid. Menlo Research and Asimov v0 contributors · CERN-OHL-S-2.0. Original image unchanged; displayed responsively. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
Ecosystem
MuJoCo

Requirements · Research details and dates

On this page

Overview

Asimov v0 is Menlo Research's earlier open-source release of a bipedal lower body: two legs with six actuated joints each, an articulated toe and an RSU (revolute–spherical–universal) ankle linkage. The README describes it as built from off-the-shelf components and compatible with MJF printing and other low-volume processes. It suits developers who already have, or will build, their own electronics and control stack. [1]

It is easy to confuse with Asimov 1, whose separate repository describes a 1.2 m, 35 kg humanoid with 25 actuated joints, arms, a head, onboard computers, electrical CAD and onboard software. None of those upper-body, compute or electrical parts appear in the v0 archive. [6] [7]

Is this for you?

Known limitations
  • Lower body only; no arms, torso electronics or controller are specified
  • STEP assembly is a Git LFS pointer in the source archive; payload not retrieved or validated
  • No electronics, wiring, firmware, controller software or procurement BOM identified in the repository
  • MJCF ankle joints are modeled as pitch and roll, while the hardware drives them through motors A and B
  • No build, actuation or walking test performed for this profile

Source-review boundaries; no hardware tests.

[1] [4] [5] [6] · Editorial assessment

What you need

Dependencies
  • MuJoCo-compatible simulator for the provided MJCF model (no version stated)

Inferred from the MJCF file format; the README states no software dependency.

[5] · Editorial assessment

Hardware & parts

Hardware configuration

Bipedal lower body: six actuated joints per leg plus a spring-loaded articulated toe.

[1] [5]

Actuators
  • Encos EC-A6416-P2-25 (hip pitch)
  • Encos EC-A5013-H17-100 (hip roll)
  • Encos EC-A3814-H14-107 (hip yaw)
  • Encos EC-A4315-P2-36 (knee pitch)
  • Encos EC-A4310-P2-36 x2 (ankle motors A and B)

Per leg; two legs give twelve actuators.

[1]

Sensors
  • IMU site in the pelvis (simulation model)

Only the MJCF defines an IMU site; no physical sensor part is named.

[5]

Degrees of freedom

12

README: 12 DOF actuation, 6 per leg. The MJCF toe joints carry a spring and are not counted.

[1]

Assembly & first use

Project documentation [1]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Cost and license scope

No upstream BOM, price or cost figure was identified. The actuators, MJF parts, electronics and power system therefore need separate quotes. [1] [6]

The root CERN-OHL-S-2.0 is the only license file. It is strongly reciprocal: anyone who makes and conveys products must give recipients the complete source or its location. The purchased Encos motors are not part of the published design files. [1] [3]

No fabrication, assembly, actuation or simulation run was performed for this profile.

3D preview

Preview not available yet. Design-source links are available. A configuration-matched assembly and its file-level reuse scope have not yet been reviewed for a hosted preview.

Project notes

What the pinned repository contains

The archive holds the README, the CERN-OHL-S-2.0 license, a mechanical folder and a simulation folder. The simulation folder has fifteen STL link meshes and a MuJoCo (MJCF) model. The mechanical folder links an externally hosted 3D viewer and explains the ankle mapping. Its STEP assembly is a 134-byte Git LFS pointer to a payload of about 101 MB. We did not retrieve that payload, so we cannot say whether it is a fabrication-ready model. No print-ready part set, drawings, BOM, wiring or firmware was identified. [4] [6]

Joints, motors and the ankle mapping

The README lists hip pitch at 120 Nm peak, hip roll 90 Nm, hip yaw 60 Nm, knee 75 Nm and each ankle motor 36 Nm. Left and right ranges are mirrored; for example, left hip pitch is −120° to +57° and right is −57° to +120°. Each joint names an Encos motor model, and both ankle motors use the EC-A4310-P2-36. [1]

The ankle table describes motors A and B, each ±70°, rather than pitch and roll directly. Two linkages move a bar, and the mechanism note derives a small-angle mapping between motor angles and ankle pitch and roll. The MJCF model instead defines ankle pitch and roll joints with their own limits (left pitch −0.349 to 0.5 rad, roll ±0.1 rad). A controller therefore has to convert between the two, and the simulation limits should not be read as the motor table. [1] [4] [5]

In the model, each toe joint has a spring stiffness and no motor class, so we read it as passive. That is an inference from the model file. The model's inertial masses add up to about 15.9 kg across its fifteen bodies. That is our sum of simulation values, not a measured weight. [5]

What we checked

Source research only; no fabrication, assembly, actuation or simulation run performed. No affiliate links added.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Jan 28, 2026 [2]
Latest release
Not established
Profile updated
Oct 25, 2026
Sources last checked
Oct 5, 2026
Next review
Nov 5, 2026
Reviewed revision
759204f531b071e65540e8b31d89736a3d09e0dd (commit snapshot; no published stable release found) · repository

Source files and licenses

Licensed mechanical and simulation sources are published, but electronics, firmware, BOM and assembly material were not identified.

LayerAvailability / license
mechanical designavailable · CERN-OHL-S-2.0
The STEP assembly is stored through Git LFS: the source archive holds a pointer naming a 101,206,631-byte payload, which was not retrieved or checked. STL meshes under sim-model are simulation assets; no print-ready part set or fabrication drawings identified. [1] [3] [6]
electronicsnot found · License not fully assessed
No schematics, wiring or board files identified in the pinned repository; motors are purchased Encos units. [6]
firmwarenot found · License not fully assessed
No actuator or controller firmware identified. The ankle mapping note includes C++ snippets, not a firmware package. [4] [6]
softwareavailable · CERN-OHL-S-2.0
Only a MuJoCo model is published; no control, training or deployment code identified. Root license is the only license file. [3] [5] [6]
documentationavailable · CERN-OHL-S-2.0
README joint/motor tables and the ankle derivation; root license applies as declared. [1] [3] [4]

No trained policy is part of this release.

No dataset is part of this release.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

  • S001 Asimov v0 README
    Lower-body scope, joint table with ranges and peak torques, Encos motor models and fabrication notes.
    Revision, date & where cited

    Menlo Research (Asimov) / asimov-v0 contributors · github.com · revision 759204f · README.md at 759204f5 · Accessed Oct 5, 2026


    Used for: Overview, Is this for you?, Hardware & parts, Assembly & first use and 3 more
  • S002 menloresearch/asimov-v0: commit 759204f
    Selected commit, date, archive checksum, popularity counts and license hint.
    Revision, date & where cited

    Menlo Research (Asimov) / asimov-v0 contributors · github.com · ; default-branch snapshot, no stable release in first 100 · Accessed Oct 5, 2026


    Used for: What we checked
  • S003 Repository license (CERN-OHL-S-2.0)
    CERN Open Hardware Licence v2 Strongly Reciprocal text.
    Revision, date & where cited

    Menlo Research (Asimov) / asimov-v0 contributors · github.com · revision 759204f · Accessed Oct 5, 2026


    Used for: Cost, Source files and licenses
  • S004 Mechanical notes and ankle mechanism derivation
    External 3D viewer link and the two-motor ankle pitch/roll mapping.
    Revision, date & where cited

    Menlo Research (Asimov) / asimov-v0 contributors · github.com · revision 759204f · mechanical/README.md; mechanical/ankle_mechanism.md · Accessed Oct 5, 2026


    Used for: Is this for you?, What the pinned repository contains, Joints, motors and the ankle mapping, Source files and licenses
  • S005 MuJoCo model
    Body tree, joint ranges, inertial masses, toe spring and IMU sensor site.
    Revision, date & where cited

    Menlo Research (Asimov) / asimov-v0 contributors · github.com · revision 759204f · Accessed Oct 5, 2026


    Used for: Is this for you?, What you need, Hardware & parts, Joints, motors and the ankle mapping and 1 more
  • S006 Pinned archive inventory and Git LFS pointer
    File list showing STL meshes, MJCF and a 134-byte LFS pointer in place of the STEP assembly.
    Revision, date & where cited

    Menlo Research (Asimov) / asimov-v0 contributors · github.com · revision 759204f · archive member list; .gitattributes; mechanical/ASV0_lowerBody.STEP pointer · Accessed Oct 5, 2026


    Used for: Overview, Is this for you?, Cost, What the pinned repository contains and 1 more
  • S007 Asimov 1 README (separate repository, for disambiguation)
    Asimov 1 scope used only to distinguish it from v0.
    Revision, date & where cited

    Asimov / asimov-1 contributors · github.com · revision 35ae7b3 · README.md at 35ae7b35 (preserved archive) · Accessed Oct 5, 2026


    Used for: Overview
  • S008 Upstream image and reuse attribution
    Media-only review: Upstream photograph of Asimov v0 lower-body hardware during development, not a complete finished humanoid. Reuse basis: CERN-OHL-S-2.0; inspected LICENSE.txt and the pinned file inventory for nearer notices. Original image unchanged; displayed responsively. This does not refresh technical or cost evidence.
    Revision, date & where cited

    Menlo Research and Asimov v0 contributors · github.com · revision 759204f · Image SHA-256 80f72df99bbad3771d1a65b0a3c46008588868f89636885b955e9e8191b0dddb; repository · Accessed Oct 25, 2026

Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5

Change history

2026-10-05 — Initial source-researched profile from pinned commit 759204f5.

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.