Open Source RoboticsRobots, software & learning

BCN3D Moveo

Robot / hardware build

A printed educational robot arm with CAD, firmware, BOM and assembly documents in one source repository. [1]

Build & first use →Official website

For
Technical educators; Experienced student build teams [1]
Cost
No current cost or bill of materials established yet.
Source rights
Named licenses are documented by part. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Paper photograph of two constructed BCN3D Moveo arms holding a smart textile in the authors’ 2020 experiment; this is a partial view of the dual-arm setup.
Paper photograph of two constructed BCN3D Moveo arms holding a smart textile in the authors’ 2020 experiment; this is a partial view of the dual-arm setup. Andreas Verleysen, Thomas Holvoet, Remko Proesmans, Cedric Den Haese and Francis wyffels · CC-BY-4.0. Embedded image extracted from page 8 of the source PDF and losslessly decoded to PNG; no retouching. Cropped to isolate the top-right experimental photograph of the two BCN3D Moveo arms from Figure 7; full extracted image retained. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware

Research details and dates

On this page

Overview

Moveo's repository brings together CAD, printable STL files, a bill of materials, firmware and a user manual. Its intended use is education across mechanical design, automation and programming. The source tree provides more than a visual model, but it still requires a builder to reconcile the parts and electronics. [1] [4]

3D preview

Articulation 1 — part 1M1. This preview shows one component, not the complete robot.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original STL · File checksums and provenance

This model contains one geometric body.

Source, license and scale

Source: BCN3D Technologies, revision 0866a92501277636f76000a195d8a16d44b5b476. Original and preview: MIT. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STL does not declare units; confirm dimensions against the project design. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

Hardware & parts

Hardware configuration

Printed articulated arm

[1]

Assembly & first use

Project documentation [1]

Assembly

Use the repository USER MANUAL, BOM, CAD/STL files and firmware together.

[1]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Source release does not mean a current kit offer

BCN3D's overview says the project was released for the community rather than commercialized by BCN3D. Do not read that historical statement as proof that a present-day kit, replacement-parts service or support contract is available. This review establishes no current supplier offer. [1]

Start with BOM/BCN3D Moveo BOM.pdf and USER MANUAL at reviewed commit 0866a92501277636f76000a195d8a16d44b5b476, alongside its CAD and firmware. Mixing later third-party modifications into that collection would require another compatibility check. The root license is MIT; it does not license separately purchased components or establish their current availability. [2] [3] [4]

The overview reports an assembly workshop involving 15 institutes. That is useful historical context, not an independently verified current user base. Current build cost, successful calibration and our support effort remain unmeasured. [1]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • A limitations summary
  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Oct 3, 2016 [2]
Latest release
Not established
Profile updated
Oct 26, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
0866a92501277636f76000a195d8a16d44b5b476 (commit snapshot; no published stable release found) · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · MIT
Repository root license; purchased components and third-party materials require separate checks. [1] [4] [3]
electronicsnot found · License not fully assessed
No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4]
firmwareavailable · MIT
Repository-level license; dependency licenses and controller compatibility still need inspection. [1] [4] [3]
softwarenot found · License not fully assessed
No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4]
documentationavailable · MIT
Repository source documents; no permission inferred for external material. [1] [4] [3]

This profile covers the described physical configuration and control route without a particular learned policy or dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

  • S001 BCN3D/BCN3D-Moveo: README.md
    Revision, date & where cited

    github.com · revision 0866a92 · Accessed Sep 30, 2026


    Used for: Overview, Hardware & parts, Assembly & first use, Source release does not mean a current kit offer and 1 more
  • S002 BCN3D/BCN3D-Moveo: commit 0866a92
    Revision, date & where cited

    github.com · Accessed Sep 30, 2026


    Used for: Source release does not mean a current kit offer, What we checked
  • S003 BCN3D/BCN3D-Moveo: LICENSE
    Revision, date & where cited

    github.com · revision 0866a92 · Accessed Sep 30, 2026


    Used for: Source release does not mean a current kit offer, Source files and licenses
  • S004 BCN3D/BCN3D-Moveo: files
    Revision, date & where cited

    github.com · revision 0866a92 · archive file inventory · Accessed Sep 30, 2026


    Used for: Overview, Source release does not mean a current kit offer, Source files and licenses
  • S007 Upstream image and reuse attribution
    Media-only review: Paper photograph of two constructed BCN3D Moveo arms holding a smart textile in the authors’ 2020 experiment; this is a partial view of the dual-arm setup. Reuse basis: CC-BY-4.0. Section 3.1 states the authors constructed BCN3D Moveo arms and links the same upstream repository. Figure 7 combines diagrams with three actual experiment photographs. Crop selects only the top photograph, showing blue and black Moveo arms holding textile; no diagram is labeled a photo. This is their own experiment, with no third-party-image restriction; actual article CC BY 4.0 is preserved. Caption discloses partial dual-arm context. Full extracted figure retained. Embedded image extracted from page 8 of the source PDF and losslessly decoded to PNG; no retouching. Cropped to isolate the top-right experimental photograph of the two BCN3D Moveo arms from Figure 7; full extracted image retained. Technical/cost evidence dates unchanged.
    Revision, date & where cited

    Andreas Verleysen, Thomas Holvoet, Remko Proesmans, Cedric Den Haese and Francis wyffels · doi.org · Simpler Learning of Robotic Manipulation of Clothing by Utilizing DIY Smart Textile Technology, page 8 Figure 7 top-right photograph; image SHA-256 40da64a68776b0bf10ab5fc35552462ea2a876de86eae5ca51b32d9ee4bbf30c · Accessed Oct 26, 2026

Videos

  • S005 Andreas Hölldorfer (YouTube channel)
    A YouTube channel linked from the project’s own documentation; not established as the project’s own. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube channel Andreas Hölldorfer · youtube.com · Accessed Oct 4, 2026

  • S006 BCN3D (YouTube channel)
    The project’s own YouTube channel, found by searching YouTube and checked against the channel page. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube channel BCN3D · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.5.0-draft.1

Change history

2026-10-04 — Added 2 YouTube reference(s) (S005, S006): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.