Open Source RoboticsRobots, software & learning

BioAmp EXG Pill

Sensor component

Open-hardware biopotential analog front-end board (2.54 × 1.00 cm) for ECG, EMG, EOG and EEG acquisition with a 5 V microcontroller ADC; a sensor component with EMG servo and claw-control example sketches, not a robot. [1] [6]

Build & first use →Official websiteUpstream build guideBill of materials

For
Makers, students and researchers building EMG-driven servo, gripper or human-interface experiments around a microcontroller [1] [6] [7]
Cost
USD 69.00–249.00 vendor prices for 2 versions [10] · checked Oct 5, 2026 · DetailsNot included: microcontroller or ADC board, servo, claw or other actuator and power source and computer and more.
Source rights
Named licenses are documented by part. Review licenses
Unknowns
tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of assembled BioAmp EXG Pill v1.0 boards; this is an electronics component, not a complete robot.
Upstream photograph of assembled BioAmp EXG Pill v1.0 boards; this is an electronics component, not a complete robot. Upside Down Labs · CC-BY-4.0. Original image unchanged; displayed responsively. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
Ecosystem
Arduino

Requirements · Research details and dates

On this page

Overview

The BioAmp EXG Pill is a 2.54 × 1.00 cm analog front-end board from Upside Down Labs for recording ECG, EMG, EOG and EEG signals with any 5 V microcontroller that has an ADC, or with a dedicated ADC such as the ADS1115. [1] It is a sensor component, not a robot: it has no actuators or onboard processor. It appears in this catalog because the repository includes EMG examples that drive actuators, which makes it a candidate input for muscle-controlled grippers or hand experiments. [1] [6]

Is this for you?

Use cases
  • EMG envelope detection driving a hobby servo or 3D-printed claw (upstream example sketches)
  • ECG, EOG and EEG recording experiments

[1] [6] [7]

Known limitations
  • Upstream states it is not a certified medical device
  • README points to production Gerber files in hardware/gerbers, but no gerbers directory was found in the pinned archive
  • OSHWA certification IN000026 lists version 0.7, while the repository design files are rev 1.0
  • Requires a separate 5 V microcontroller or ADC, electrodes and cables

Source-review boundaries; no electrical test.

[1] [4] [5] [8] [9] · Editorial assessment

What you need

Host computer

No host PC required for the servo examples; a 5 V microcontroller with an ADC runs the sketches.

Derived from sketch structure; serial plotting optional.

[1] [6] · Editorial assessment

Dependencies
  • Arduino IDE
  • Arduino Servo library (ESP32Servo on ESP32) for the servo examples

[6]

Hardware & parts

Upstream bill of materials [5]

Hardware configuration

Sensor component: a biopotential amplifier board with no actuators; example sketches drive an external hobby servo.

Classification note; the board is not a robot.

[1] [6] · Editorial assessment

Controller

No onboard microcontroller; pairs with an external 5 V microcontroller or ADC.

[1]

Sensors
  • Biopotential (EXG) amplifier based on a TL074 quad op-amp, with electrode inputs

[1] [4]

Power

Designed for 5 V microcontroller systems.

[1] [4]

Dimensions

2.54 × 1.00 cm board

[1]

Assembly & first use

Open the upstream getting-started guide [7] · Project documentation [5] [7]

  • Connect the board output to a 5 V microcontroller ADC input (for example an Arduino UNO or Nano)
  • Attach electrodes for the chosen signal
  • Load the EMG filter or envelope sketch
  • For actuator control, adapt the ServoControl or ClawController sketch thresholds

Editorial source-navigation sequence, not reproduced instructions.

[1] [6] [7] · Editorial assessment

Assembly

Surface-mount PCB; KiCad project, interactive BOM and STEP models are published, and assembled boards are sold through Crowd Supply.

From file inventory and vendor listing; no board fabricated here.

[5] [10] · Editorial assessment

Cost

VersionPrice
EXG Explorer Pack (two BioAmp EXG Pill boards with electrodes and cables)USD 69.00 [10]
Vendor price

Crowd Supply listing; US and worldwide shipping rates stated · Checked 2026-10-05

IncludedTwo BioAmp EXG Pill boards; 15 gel electrodes; Four angled and four straight 3-pin headers; Six alligator clips; Two 1.5 mm electrode cables
Not includedMicrocontroller or ADC board; Servo, claw or other actuator; Power source and computer; Destination taxes and duties not established
StockListed as in stock on 2026-10-05.
Delivery and taxListed shipping USD 8 (US) or USD 18 (worldwide); taxes not established.
Price details

Vendor pack price on the preserved Crowd Supply page; board revision shipped in the pack is not stated there.

Crowd Supply listing; US and worldwide shipping rates stated · Checked 2026-10-05 · Quantity 1

A 5 V microcontroller, electrodes beyond the included 15, and any actuator for control experiments.

VersionPrice
Neuroscience Ninja Pack (eight BioAmp EXG Pill boards with electrodes and cables)USD 249.00 [10]
Vendor price

Crowd Supply listing; US and worldwide shipping rates stated · Checked 2026-10-05

IncludedEight BioAmp EXG Pill boards; 100 gel electrodes; 16 angled and 16 straight 3-pin headers; 24 alligator clips; Eight 1.5 mm electrode cables
Not includedMicrocontroller or ADC boards; Actuators; Power source and computer; Destination taxes and duties not established
StockListed as in stock on 2026-10-05.
Delivery and taxListed shipping USD 8 (US) or USD 18 (worldwide); taxes not established.
Price details

Vendor pack price on the preserved Crowd Supply page; eight boards, not a single-board price.

Crowd Supply listing; US and worldwide shipping rates stated · Checked 2026-10-05 · Quantity 1

Microcontrollers and any actuators.

Cost

The preserved Crowd Supply page lists an EXG Explorer Pack at USD 69 (two boards, 15 gel electrodes, headers, clips and two electrode cables) and a Neuroscience Ninja Pack at USD 249 (eight boards and accessories), with USD 8 US or USD 18 worldwide shipping, both shown in stock on 2026-10-05. The page does not state which board revision ships, and these packs exclude the microcontroller, servo and power. [10]

3D preview

Preview not available yet. The reviewed sources did not establish a supported 3D payload for a hosted preview. The design may be supplied as drawings, an external CAD document or a separate download.

Project notes

What it does for a robotics builder

The README lists 15 example sketches, including EMG band-pass filtering, envelope detection "for robotics and biomedical applications", servo control and a servo claw controller. [1] The ClawController sketch samples the board at 500 Hz, filters the signal, computes an envelope and maps it to a servo angle between 90 and 180 degrees on pin 9. The repository also ships STL files for a small printed claw. [5] [6] The EMG documentation shows the same servo-controller and LED bar-graph examples. [7]

To reproduce that route you also need a 5 V board such as an Arduino UNO or Nano, electrodes and cables, a hobby servo and power. [1] [6] The thresholds in the sketch are fixed constants, so expect to tune them for your own signal; no signal quality or control performance was measured here.

Upstream states the board "is not a certified medical device" and should not be treated like one. [8] This catalog makes no safety, electrical-isolation or medical-suitability assessment.

Configuration and files

This entry covers the main-branch snapshot dated 2024-08-23; no stable release was found. The KiCad title block reads revision 1.0, dated 2023-04-27, and describes a quad op-amp design. [2] [4] The pinned archive contains the KiCad schematic and PCB, a schematic PDF, an interactive BOM and STEP models. The README says production Gerber files are in a hardware/gerbers folder, but no Gerber files were found in the archive, so plan to generate fabrication outputs from the KiCad files. [1] [5]

The OSHWA certification IN000026, dated April 16, 2021, lists version 0.7, not the rev 1.0 files reviewed here. [9]

What remains unknown

Gerber outputs, the shipped revision and certification of rev 1.0 are unresolved. No board was fabricated, connected to electrodes or tested for this entry.

What we checked

Source research only; no board fabrication, electrode use, firmware installation or test performed. The catalog makes no safety or medical-suitability assessment; upstream states the board is not a certified medical device. Vendor prices are quoted from a preserved page; no affiliate links.

Not yet established

  • Requirements: operating system, tools

Updates

Upstream last updated
Aug 23, 2024 [2]
Latest release
Not established
Profile updated
Oct 25, 2026
Sources last checked
Oct 5, 2026
Next review
Nov 5, 2026
Reviewed revision
86bb1f45575054b4b9af78517c24ad682c3a65b6 (main commit snapshot dated 2024-08-23; no published release found); KiCad title block rev 1.0 dated 2023-04-27 · combined hardware and software repository

Source files and licenses

Complete electronics, example firmware and documentation are published under stated per-layer licenses. Included as a sensor component (category other) because upstream documents EMG-driven servo and claw control; it is not a robot and inclusion implies no medical suitability.

LayerAvailability / license
electronicsavailable · CERN-OHL-S-2.0
KiCad schematic and PCB, schematic PDF, interactive BOM and STEP model preserved. README refers to Gerber files that were not found in the pinned archive. [1] [3] [4] [5]
firmwareavailable · MIT
Arduino example sketches for the host microcontroller carry Upside Down Labs MIT headers. EXG-Visualizer has its own MIT LICENSE dated 2018 without a named holder; its provenance was not traced. [1] [3] [6]
documentationavailable · CC-BY-4.0
Documentation licensed CC BY 4.0 in LICENSE.md; some doc sections are placeholders. [1] [3] [7]

PCB component without a mechanical assembly; board STEP models and the example claw STL files are accessories, assessed under electronics and firmware.

No separate host-PC application in the reviewed repository; the software folder contains microcontroller sketches assessed under firmware.

Sensor hardware; no learned model.

No dataset is part of the release.

Licenses

LICENSE.md separates the layers: MIT for software, CERN-OHL-S v2 (strongly reciprocal) for hardware and CC BY 4.0 for documentation. [3] Under the strongly reciprocal hardware license, distributed modified designs stay under the same terms. The example sketches carry Upside Down Labs MIT headers. [6]

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

  • S001 BioAmp EXG Pill README
    Board purpose, size, 5 V MCU requirement, example sketch list, KiCad hardware statement and layer licenses.
    Revision, date & where cited

    Upside Down Labs / project contributors · github.com · revision 86bb1f4 · README.md at main commit snapshot · Accessed Oct 5, 2026


    Used for: Overview, Is this for you?, What you need, Hardware & parts and 4 more
  • S002 upsidedownlabs/BioAmp-EXG-Pill: commit 86bb1f4
    Commit date 2024-08-23; archive verified; dated popularity counts.
    Revision, date & where cited

    Upside Down Labs / project contributors · github.com · (default-branch snapshot; no stable release); GitHub API metadata · Accessed Oct 5, 2026


    Used for: Configuration and files, What we checked
  • S003 BioAmp EXG Pill license file
    MIT for software, CERN-OHL-S v2 for hardware, CC BY 4.0 for documentation.
    Revision, date & where cited

    Upside Down Labs / project contributors · github.com · revision 86bb1f4 · LICENSE.md sections Software, Hardware, Documentation · Accessed Oct 5, 2026


    Used for: Source files and licenses
  • S004 KiCad schematic title block
    Design revision 1.0 dated 2023-04-27; TL074 quad op-amp based amplifier.
    Revision, date & where cited

    Upside Down Labs / project contributors · github.com · revision 86bb1f4 · hardware/BioAmp-EXG-Pill.kicad_sch title_block and amplifier symbol value · Accessed Oct 5, 2026


    Used for: Is this for you?, Hardware & parts, Configuration and files, Source files and licenses
  • S005 Pinned archive file inventory
    KiCad project, schematic PDF, interactive BOM and STEP models present; no gerbers directory found.
    Revision, date & where cited

    Upside Down Labs / project contributors · github.com · revision 86bb1f4 · Complete archive filename inventory; selected hardware and example paths · Accessed Oct 5, 2026


    Used for: Is this for you?, Hardware & parts, Assembly & first use, What it does for a robotics builder and 2 more
  • S006 ClawController example sketch
    EMG envelope mapped to a hobby-servo angle at 500 Hz sampling; MIT header.
    Revision, date & where cited

    Upside Down Labs / project contributors · github.com · revision 86bb1f4 · Accessed Oct 5, 2026


    Used for: Overview, Is this for you?, What you need, Hardware & parts and 3 more
  • S007 Electromyography documentation page
    EMG recording, filter and envelope sketches; servo-controller and LED bar-graph examples.
    Revision, date & where cited

    Upside Down Labs / project contributors · github.com · revision 86bb1f4 · Accessed Oct 5, 2026


    Used for: Is this for you?, Assembly & first use, What it does for a robotics builder, Source files and licenses
  • S008 Electrocardiography documentation page
    States that the board is not a certified medical device.
    Revision, date & where cited

    Upside Down Labs / project contributors · github.com · revision 86bb1f4 · Accessed Oct 5, 2026


    Used for: Is this for you?, What it does for a robotics builder
  • S009 OSHWA certification IN000026
    Certification dated April 16, 2021 for version 0.7; licenses CERN (hardware), MIT (software), CC BY (documentation).
    Revision, date & where cited

    Open Source Hardware Association · certification.oshwa.org · Certification listing page · Accessed Oct 5, 2026


    Used for: Is this for you?, Configuration and files
  • S010 Crowd Supply product page
    EXG Explorer Pack USD 69 and Neuroscience Ninja Pack USD 249 with listed contents; USD 8 US / USD 18 worldwide shipping; in stock at retrieval.
    Revision, date & where cited

    Crowd Supply (seller); produced by Upside Down Labs · crowdsupply.com · Product page purchasing options as retrieved 2026-10-05 · Accessed Oct 5, 2026


    Used for: Assembly & first use, Cost
  • S011 Upstream image and reuse attribution
    Media-only review: Upstream photograph of assembled BioAmp EXG Pill v1.0 boards; this is an electronics component, not a complete robot. Reuse basis: CC-BY-4.0; inspected LICENSE.md and the pinned file inventory for nearer notices. Original image unchanged; displayed responsively. This does not refresh technical or cost evidence.
    Revision, date & where cited

    Upside Down Labs · github.com · revision 86bb1f4 · Image SHA-256 3b4d5b4dcd3816658985595786d23b717084ccbe7f6760c1904a4ffde9196af1; repository · Accessed Oct 25, 2026

Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5

Change history

2026-10-05 — Initial intake from the Growbotics comparison lead; verified against the upstream repository, OSHWA listing and Crowd Supply page.

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.