Open Source RoboticsRobots, software & learning

Bloft Bad-Ass Pellet Extruder

End effector

Large-format pellet screw extrusion around a purchased RobotDigg 16 mm compression screw/barrel and NEMA23 flange. [1] [2] [3]

Build & first use →Official website

For
Builders evaluating this tooling design and its integration requirements [1] [2] [3]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of the Bad Ass Pellet Extruder assembly.
Upstream photograph of the Bad Ass Pellet Extruder assembly. Bloft Design Lab contributors · CC-BY-SA-4.0. Original image unchanged; displayed responsively. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
License
CC-BY-SA-4.0 · license not fully assessed for documentation · Details by part

Research details and dates

On this page

Is this for you?

Known limitations
  • 1–2 kg/h is listed as a design driver, not independently verified throughput. Machining, heater/power package, feed system, moving mass and robot synchronization need reconciliation.
  • No hardware build or test performed.

Source-researched; no physical verification.

[1] [2] [3] · Editorial assessment

3D preview

Bad Ass Pellet Extruder v13 assembly. Assembly geometry from the upstream STEP. Purchased components are represented; their manufacturing sources and physical fit are not established by this preview.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original STEP · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: bloft-design-lab contributors, revision b5b26ed17850488f22e8cc4d13b27e8d10c22e62. Original and preview: CC-BY-SA-4.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

Hardware & parts

Hardware configuration

Pellet extrusion

Source-researched; no physical verification.

[1] [2] [3] · Editorial assessment

Assembly & first use

Project documentation [1] [2] [3]

Assembly

1–2 kg/h is listed as a design driver, not independently verified throughput. Machining, heater/power package, feed system, moving mass and robot synchronization need reconciliation.

Known prerequisites and unresolved assembly decisions; not a complete build instruction.

[1] [2] [3] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Mounting and application

Designed for Hangprinter cable robot; no cobot/delta mount verified. [1] [2] [3]

Before sourcing the build

1–2 kg/h is listed as a design driver, not independently verified throughput. The README calls for a drill bench, soldering, 3D printing and CNC access. It warns about mains-powered mica band heaters and electric-shock, burn and fire hazards, recommending experienced electrical help. Reconcile the heater/power package, feed system, moving mass and robot synchronization. [1] [2] [3]

Files and reuse terms

CC-BY-SA-4.0 license and README; a template badge says MIT and should not override the license. [1] [2] [3]

The pinned inventory lists Fusion 360, IGES, STEP and Inventor files, without identified BOM paths. CAD availability was assessed from that inventory; fabrication suitability was not validated. Establish a configuration-specific purchasing list and matched control sources, including the separate reuse terms of purchased components and controls. Current delivered cost and measured performance are not established; no hardware was built or tested for this profile.

What we checked

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 25, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
b5b26ed

Source files and licenses

CC-BY-SA-4.0 license and README; a template badge says MIT and should not override the license. 1–2 kg/h is listed as a design driver, not independently verified throughput. Machining, heater/power package, feed system, moving mass and robot synchronization need reconciliation.

LayerAvailability / license
mechanical designavailable · CC-BY-SA-4.0
CC-BY-SA-4.0 license and README; a template badge says MIT and should not override the license. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3]
electronicsnot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3]
firmwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3]
softwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3]
documentationavailable · License not fully assessed
CC-BY-SA-4.0 license and README; a template badge says MIT and should not override the license. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3]

This profile scopes hardware tooling, without selecting a learned controller or training dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

Videos

  • S004 bloft design lab (YouTube channel)
    The project’s own YouTube channel, found by searching YouTube and checked against the channel page. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube channel bloft design lab · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.

2026-10-04 — Added 1 YouTube reference(s) (S004): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.