Open Source RoboticsRobots, software & learning

CRAFT Hand

End effector

Printable CRAFT Hand parts and Bambu print profiles with left/right palm and thumb alternatives. [1] [2] [3]

Build & first use →Official website

For
Builders evaluating this tooling design and its integration requirements [1] [2] [3]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream paper photograph of the assembled CRAFT Hand (Figure 1A).
Upstream paper photograph of the assembled CRAFT Hand (Figure 1A). Leo Lin, Shivansh Patel, Jay Moon, Svetlana Lazebnik and Unnat Jain · CC-BY-4.0. Embedded image extracted from page 1 of the source PDF and losslessly decoded to PNG; no retouching.
Licenses & related hardware
License
MIT · license not fully assessed for documentation · Details by part

Research details and dates

On this page

Is this for you?

Known limitations
  • Use filename quantity suffixes and documented orientations. Link external BOM/build/control guides and define actuator/version before comparing whole-hand cost.
  • No hardware build or test performed.

Source-researched; no physical verification.

[1] [2] [3] · Editorial assessment

3D preview

CRAFT Hand MuJoCo simulation model. The CRAFT Hand MuJoCo simulation model (craft_hand.xml in the CRAFT-hand-MJCF repository of the same craft-hand organization and MIT copyright holder as the print files, commit 473ea3e) at zero joint positions: the palm base, four fingers and the thumb as 21 meshes on the source body tree with 20 hinge joints (438,494 triangles, no decimation). All meshes share the source Fusion 360 export frame and are placed only by the model. These are simulation meshes, one per palm or finger segment; they are not the individual printable parts (including TPU parts and nail guards) of the print-file revision 80c780c reviewed for this profile and are not verified to match them. The model does not state whether it is a left or right hand. MIT License, Copyright (c) 2026 Leo Lin. No manufacturing clearance is claimed. Fit and motion are not verified.

MIT License, “Copyright (c) 2026 Leo Lin” (CRAFT-hand-MJCF LICENSE; its README says “This project is licensed under the MIT License”). The print-file repository reviewed for this profile carries the same MIT notice. No manufacturing clearance is claimed. License: MIT License (CRAFT-hand-MJCF LICENSE) · upstream notice.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original MJCF source bundle (ZIP) · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: Leo Lin (CRAFT Hand), revision 473ea3ef6158ef94359f8f4b15a258fe43516328. Original and preview: MIT. Preview conversion by Open Source Robotics; source files unchanged inside the downloadable bundle. Preview coordinates are centered and rounded to six decimal places. Source visual shapes and body transforms evaluated at the reference pose by MuJoCo, then metres converted to millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

Hardware & parts

Hardware configuration

Dexterous hands

Source-researched; no physical verification.

[1] [2] [3] · Editorial assessment

Assembly & first use

Project documentation [1] [2] [3]

Assembly

Use filename quantity suffixes and documented orientations. Link external BOM/build/control guides and define actuator/version before comparing whole-hand cost.

Known prerequisites and unresolved assembly decisions; not a complete build instruction.

[1] [2] [3] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Mounting and application

Dedicated robotic-hand fabrication repository; no arm mount verified in its README. [1] [2] [3]

Before sourcing the build

Start with the pinned print-files repository. Filename suffixes x2, x5 and x10 indicate print quantities; Bambu files provide orientation references for users of other printers. A left-hand build substitutes PalmTop, PalmBOT and ThumbEnd. A configuration-matched BOM, assembly/control documentation and actuator selection still need to be located and checked before sourcing a complete hand. [1] [2] [3]

Files and reuse terms

MIT in the print-files repository; Rights for separately selected control or simulation components have not been assessed. [1] [2] [3]

The reviewed print files and README do not establish a complete, matched mechanical and control package. Current delivered cost and measured performance are not established; no hardware was built or tested for this profile.

What we checked

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 26, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
80c780c

Source files and licenses

MIT in the print-files repository; API and simulation licenses remain separately scoped. Use filename quantity suffixes and documented orientations. Link external BOM/build/control guides and define actuator/version before comparing whole-hand cost.

LayerAvailability / license
mechanical designavailable · MIT
MIT in the print-files repository; API and simulation licenses remain separately scoped. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3]
electronicsnot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3]
firmwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3]
softwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3]
documentationavailable · License not fully assessed
MIT in the print-files repository; API and simulation licenses remain separately scoped. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3]

This profile scopes hardware tooling, without selecting a learned controller or training dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

  • S001 CRAFT Hand pinned tree
    Revision, date & where cited

    github.com · revision 80c780c · Accessed Sep 30, 2026


    Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more
  • S002 CRAFT Hand / LICENSE
    Revision, date & where cited

    craft-hand · raw.githubusercontent.com · Accessed Sep 30, 2026


    Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more
  • S003 CRAFT Hand / README.md
    Revision, date & where cited

    craft-hand · raw.githubusercontent.com · Accessed Sep 30, 2026


    Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more
  • S004 Upstream image and reuse attribution
    Media-only review: Upstream paper photograph of the assembled CRAFT Hand (Figure 1A). Reuse basis: CC-BY-4.0. Inspected the source image, its caption and the actual reuse declaration; no image-specific exception or different credit was found for this selected image. The grant is used only for this media, not as a new hardware/software license. Embedded image extracted from page 1 of the source PDF and losslessly decoded to PNG; no retouching. Technical/cost evidence dates unchanged.
    Revision, date & where cited

    Leo Lin, Shivansh Patel, Jay Moon, Svetlana Lazebnik and Unnat Jain · arxiv.org · Paper page 1, selected embedded image 5; image SHA-256 9903c6824e6fd4dd559aa2bbdcfc317900354c13fbf4dae38a53af550f2cdb07 · Accessed Oct 26, 2026

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.