Open Source RoboticsRobots, software & learning

Delta X accessory family

End effector

A family of fourth-axis jaw grippers, flexible jaws, single/double suction heads, pen tools and a filament-printing head. [1] [2] [3] [4] [5] [6] [7]

Build & first use →Official website

For
Builders evaluating this tooling design and its integration requirements [1] [2] [3] [4] [5] [6] [7]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Includes noncommercial terms. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware
License
CC-BY-NC-SA-4.0 (noncommercial) · license not fully assessed for documentation · Details by part

Research details and dates

On this page

Overview

The Delta X printed-parts repository contains related jaw grippers, flexible jaws, single and double suction heads, pen tooling and a filament-printing head. Start with its Delta-X-End-Effectors subtree and select the host robot and tool revision before sourcing parts. [4] [6]

Is this for you?

Known limitations
  • Match v1/v2 and robot model, purchased actuators, vacuum hardware, nozzle/heater and controller outputs. Preserve this family once; its variants are not separate projects.
  • No hardware build or test performed.

Source-researched; no physical verification.

[1] [2] [3] [4] [5] [6] [7] · Editorial assessment

3D preview

Delta X v2 jaw gripper tool assembly. One tool from the Delta X end-effector family: the v2 jaw gripper STEP assembly (Delta-X-End-Effectors/v2/Step-file/Gripper.STEP) with its source placements: gripper body, jaws, linkages, an SG90 hobby servo and M3 screws. The other tools in the family (soft gripper, Axis4, single and double suction cups, pen, laser module, 3D printing head and the earlier v1 tools) are separate STEP files and are not shown. The modeled SG90 servo and ISO 7046 screws are purchased components whose third-party CAD terms are unknown. Licensed CC BY-NC-SA 4.0 (noncommercial, share-alike); no commercial-use or manufacturing clearance is claimed. Fit and function are not verified.

Noncommercial license: the upstream LICENSE.md licenses this work under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International, and the README says that no one except IMWI Technology may commercialize the Delta X Robot Kit. This preview and the hosted original remain under that license with attribution to IMWI Technology (Delta X); no commercial-use or manufacturing clearance is claimed. License: CC BY-NC-SA 4.0 · upstream notice.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original STEP (gzip) · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: IMWI Technology (Delta X), revision 3cf3a63954237c5ba461c003ee55eec891c3246f. Original and preview: CC-BY-NC-SA-4.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

Hardware & parts

Hardware configuration

Delta tooling

Source-researched; no physical verification.

[1] [2] [3] [4] [5] [6] [7] · Editorial assessment

Assembly & first use

Project documentation [1] [2] [3] [4] [5] [6] [7]

Assembly

Match v1/v2 and robot model, purchased actuators, vacuum hardware, nozzle/heater and controller outputs. Preserve this family once; its variants are not separate projects.

Known prerequisites and unresolved assembly decisions; not a complete build instruction.

[1] [2] [3] [4] [5] [6] [7] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Delta-specific integration

Delta X 2 documentation identifies gripper, Axis 4, shared Laser/Vacuum/Heating, stepper and thermistor ports. Their presence documents a platform route; it does not prove that every v1/v2 tool fits every Delta X revision or that multiple tools can share an output simultaneously. Mechanical fit, electrical requirements and control mapping remain tool-specific checks. [7]

For suction, reconcile the documented air pump with the selected head and required connections. For filament printing, the kit documentation names an extruder stepper, hot end and tubing. Those purchased parts must match the selected nozzle, heater and controller configuration. The repository includes STL and STEP artifacts; its general PLA, 0.2 mm resolution, 30% infill and support guidance has not been validated for every tool variant here. [4] [6] [7]

What we checked

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Sep 30, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
3cf3a63

Source files and licenses

Actual printable/CAD repository is CC-BY-NC-SA-4.0. The empty accessory repository has GPL-3.0; that does not license the CAD. Match v1/v2 and robot model, purchased actuators, vacuum hardware, nozzle/heater and controller outputs. Preserve this family once; its variants are not separate projects.

LayerAvailability / license
mechanical designavailable · CC-BY-NC-SA-4.0
Actual printable/CAD repository is CC-BY-NC-SA-4.0. The empty accessory repository has GPL-3.0; that does not license the CAD. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] [5] [6] [7]
electronicsnot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] [6] [7]
firmwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] [6] [7]
softwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] [6] [7]
documentationavailable · License not fully assessed
Actual printable/CAD repository is CC-BY-NC-SA-4.0. The empty accessory repository has GPL-3.0; that does not license the CAD. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] [5] [6] [7]

This profile scopes hardware tooling, without selecting a learned controller or training dataset.

Which repository licenses the designs?

The actual printed-parts source uses CC BY-NC-SA 4.0: Attribution, NonCommercial and ShareAlike. Its README also restricts commercialization. The separate accessory repository contains a README and GPL-3.0 license but no inventoried CAD or BOM at the reviewed revision. That GPL notice must not be applied to the printable/CAD repository. [1] [2] [5] [6]

Configuration-matched electronics, firmware and software source coverage and their reuse terms remain unestablished. No complete current tooling cost or physical build/performance test is claimed.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.