Dummy-Robot
Robot / hardware buildA compact custom arm combining CNC parts, harmonic reducers and custom motor-control electronics. [1]
Build & first use →Official website
- For
- Experienced mechanical and embedded-control builders [1]
- Cost
- No current cost or bill of materials established yet.
- Source rights
- Some licenses are unresolved. Review licenses
- Unknowns
- host computer, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details
Licenses & related hardware
- License
- not fully assessed for mechanical design, electronics, firmware, documentation · Details by part
Overview
The reviewed overview describes an aluminium CNC arm with harmonic reducers and custom electronics. A cheaper printed version with a different reducer is presented as future work. Its hoped-for cost below RMB 2,000 is a target for that redesign, not a verified price for the preserved original. [1]
The repository contains mechanical models, hardware designs and firmware. Peak, the wireless teaching controller, is linked as a submodule, so a normal repository archive does not preserve that dependency's contents. The overview also says DummyStudio is distributed without a current plan to release its source. Downloadable software and available firmware therefore have different source coverage. [1] [4]
The command table distinguishes sequential SEQ and interrupting INT commands; TRJ trajectory tracking remains marked ToDo. Dynamics are also described as unfinished. Do not select this snapshot for a task that depends on those planned features without further implementation evidence. [1]
No applicable project-wide license was established from the inspected root documents. Commercial reuse, a complete revision-matched parts list and a reproducible homing procedure remain unresolved. We have not manufactured, assembled or operated this arm.
Is this for you?
- Known limitations
- Lower-cost printed redesign is described as future work in the reviewed overview
- TRJ trajectory mode is marked ToDo
- DummyStudio source is not promised in the reviewed overview
3D preview
Dummy Robot v164 source assembly. The complete first-party Dummy v164 STEP assembly with its source component hierarchy and placements. The repository publishes the CAD but provides no identified reuse license; this preview records that ambiguity and does not claim manufacturing or redistribution clearance. Electronics behavior, physical fit and operation are not verified.
The 3D preview loads after the page.
Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.
Download original STEP (gzip) · File checksums and provenance
Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.
Model sources
The preview uses the linked original design. Source grouping is retained where present; the caption identifies whether this is an assembly or one component.
Source, license and scale
Source: peng-zhihui / Dummy Robot contributors, revision 84453f1391c4442b5387a799571b7f67418afa2d. Original and preview: No repository license identified; public first-party CAD displayed with reuse scope unresolved. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.
Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.
What you need
- Tools
- Original design uses aluminium CNC construction
Hardware & parts
- Hardware configuration
Compact articulated arm
Assembly & first use
Cost
No current, complete configuration-specific build cost has been established for this profile.
What we checked
Source research only; no installation, physical build or performance test performed. No affiliate links added.
Not yet established
- Requirements: operating system, host computer
- A step-by-step setup summary
Updates
- Upstream last updated
- Oct 20, 2022 [2]
- Latest release
- Not established
- Profile updated
- Oct 4, 2026
- Sources last checked
- Sep 30, 2026
- Next review
- Oct 30, 2026
- Reviewed revision
- 84453f1391c4442b5387a799571b7f67418afa2d (commit snapshot; no published stable release found) · combined hardware and software repository
Source files and licenses
Available project sources support research coverage; complete build and commercial qualification remain separate.
| Layer | Availability / license |
|---|---|
| mechanical design | available · License not fully assessed Design files available; no applicable project-wide license established. [1] [4] |
| electronics | available · License not fully assessed Custom board designs present; terms and dependency scope unresolved. [1] [4] |
| firmware | available · License not fully assessed Firmware files present; licensing and submodule completeness unresolved. [1] [4] |
| software | not found · License not fully assessed No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4] |
| documentation | available · License not fully assessed Documentation available; reuse license not established. [1] [4] |
This profile covers the described physical configuration and control route without a particular learned policy or dataset.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
Project sources
- S001 peng-zhihui/Dummy-Robot: README.md
Revision, date & where cited
github.com · revision
84453f1· Accessed Sep 30, 2026
Used for: Overview, Is this for you?, What you need, Hardware & parts and 2 more - S002 peng-zhihui/Dummy-Robot: commit 84453f1
- S004 peng-zhihui/Dummy-Robot: files
Revision, date & where cited
github.com · revision
84453f1· archive file inventory · Accessed Sep 30, 2026
Used for: Overview, Source files and licenses
Videos
- S005 I made a DUMMY ROBOTIC ARM from scratch! (YouTube video)
Video from the project’s own channel (稚晖君), linked from the project’s own documentation. Not reviewed by us for accuracy.Revision, date & where cited
YouTube video 稚晖君 · youtube.com · Accessed Oct 4, 2026
- S006 稚晖君 (YouTube channel)
The project’s own YouTube channel, found by searching YouTube and checked against the channel page. Not reviewed by us for accuracy.Revision, date & where cited
YouTube channel 稚晖君 · youtube.com · Accessed Oct 4, 2026
Correction guidance · Discussion is not enabled · Profile format 0.5.0-draft.1
Change history
2026-10-04 — Added 2 YouTube reference(s) (S005, S006): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.