Open Source RoboticsRobots, software & learning

E3D ToolChanger hardware

End effector

Tool-coupling hardware with dimensioned aluminum parts, a stepper-driven latch and V6/Hemera tool variants. [1]

Build & first use →Official websiteUpstream build guideBill of materials

For
Builders comparing tool-coupling geometry and fabrication requirements. [1]
Cost
No current cost yet. Upstream bill of materials [2]
Source rights
Named licenses are documented by part. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

CAD render fallback — view still image
E3D tool-head face plate. CAD render, not a photograph. One aluminum face-plate component, not a complete tool changer.
E3D tool-head face plate. CAD render, not a photograph. One aluminum face-plate component, not a complete tool changer. E3D-Online Ltd (CAD); Open Source Robotics (render) · GPL-3.0-or-later. STEP triangulated in millimetres; shaded static render generated. Original STEP unchanged. Derived render and preview retain the source license.
Licenses & related hardware

Research details and dates

On this page

Overview

E3D's repository is useful for studying and fabricating a tool-coupling mechanism: it preserves STEP geometry, dimensioned drawings and printed accessories, plus separate V6 and Hemera tool folders. This profile covers the coupling hardware rather than a complete printer or a verified cobot adapter. The interactive preview is the TC-FACE v1.4 aluminum face plate, one component of the assembly. [1] [2] [3]

Is this for you?

Known limitations
  • Complete controller/dock integration and current delivered build cost not established.
  • No cobot or delta-robot compatibility established.

Editorial classification from cited source; no measured performance.

[1] [2] [3] · Editorial assessment

3D preview

E3D tool-head face plate. One aluminum face-plate component, not a complete tool changer.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original STEP · File checksums and provenance

This model contains one geometric body.

Source, license and scale

Source: E3D-Online Ltd, revision d36e0c769d69dac384e7e89e62ec0254aefb45b1. Original and preview: GPL-3.0-or-later. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

Hardware & parts

Upstream bill of materials [2]

Hardware configuration

Tool coupling and docking components

[1]

Actuators
  • Stepper motor in coupling-kit drawing; exact matched supplier/model unresolved.

[2]

Sensors
  • Endstop switch in coupling-kit drawing.

[2]

Assembly & first use

Open the upstream getting-started guide [1]

Assembly

Exploded coupling assembly and numbered parts list; manufacturing drawings are separate from printed accessory settings.

[2] [3] [5]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Separate machining from printing

The TC-COUPLER-KIT drawing includes an exploded assembly and a 20-line parts list. It calls for a stepper motor, motor bracket, 40-tooth and 20-tooth module-0.5 gears, an endstop switch, MR105RS bearing, shaft, dowel pin, standoff, screws, printed cover and face assembly. A collection of STLs alone therefore does not reproduce the coupling. The TC-FACE drawing specifies aluminum and millimetres; its STEP preview should not be mistaken for a qualified plastic substitute. [2] [3]

The printed-accessory README lists a cover body, cable bracket, cable guide and two Hemera Bowden brackets. Its typical settings are 0.20 mm layers, a 0.40 mm nozzle, three perimeters, five top and bottom layers and 12% infill. These are accessory settings, not manufacturing instructions for the machined face plate. [5]

Match a tool variant before sourcing

The drawing revisions are component-specific: the coupling-kit file is v1.1 while the face plate is v1.4. Keep those identifiers with the selected files instead of treating the repository snapshot as one universal hardware revision. Begin with the coupling drawing and selected tool folder, then reconcile purchased motor, bearing and switch specifications with the controller and docking arrangement you intend to use. [2] [3]

A complete current BOM price, matched controller configuration, homing procedure and cycle-life evidence were not established in this review. Neither robot-arm mounting nor operation in arbitrary orientations is demonstrated by these sources. Those gaps need resolving before adapting this printer-oriented design to an arm. No complete setup quote or physical test is claimed.

E3D explicitly releases the hardware files and drawings under GPL-3.0-or-later. Original STEP bytes are provided unchanged; the triangulated preview and shaded image are labelled derivatives under the same license, with the source drawing and license linked. The image is a CAD render of one plate, not a photograph of a complete tool changer. [1] [3] [4]

What we checked

Source research only. No physical build, procurement, calibration or performance testing.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 4, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
d36e0c7

Source files and licenses

Licensed mechanical source is available; purchased components and complete robot integration are not fully open or verified.

LayerAvailability / license
mechanical designavailable · GPL-3.0-or-later
Repository hardware license; purchased components retain their own rights. [1] [4]
electronicsnot found · License not fully assessed
No complete matched robot-side source set established in the inspected mechanical repository and parts list; purchased parts require separate review. This does not assert that all related code is absent. [1] [2]
firmwarenot found · License not fully assessed
No complete matched robot-side source set established in the inspected mechanical repository and parts list; purchased parts require separate review. This does not assert that all related code is absent. [1] [2]
softwarenot found · License not fully assessed
No complete matched robot-side source set established in the inspected mechanical repository and parts list; purchased parts require separate review. This does not assert that all related code is absent. [1] [2]
documentationavailable · GPL-3.0-or-later
Repository hardware license; purchased components retain their own rights. [1] [4]

Mechanical tooling profile without a selected learned controller or dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

Videos

  • S006 E3D (YouTube channel)
    The project’s own YouTube channel, found by searching YouTube and checked against the channel page. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube channel E3D · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-10-04 — Added 1 YouTube reference(s) (S006): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.