FabMX extruder
End effectorPellet extruder with multiple STEP revisions and NEMA17/NEMA23 variants, intended for MIM printing materials. [1] [2]
Build & first use →Official website
- Cost
- No current cost or bill of materials established yet.
- Source rights
- Some licenses are unresolved. Review licenses
- Unknowns
- host computer, tools, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware
- License
- CERN-OHL-P-2.0 · license not fully assessed for documentation · Details by part
Is this for you?
- Known limitations
- Choose one screw diameter/motor/revision; follow external build documentation and reconcile feedstock, debinding/sintering needs and controls. A CAD family is not one bill of materials.
- No hardware build or test performed.
Source-researched; no physical verification.
3D preview
FabMX pellet extruder v1.3 model. Assembly geometry from the upstream STEP. Purchased components are represented; their manufacturing sources and physical fit are not established by this preview.
The 3D preview loads after the page.
Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.
Download original STEP · File checksums and provenance
Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.
Model sources
The preview uses the linked original design. Source grouping is retained where present; the caption identifies whether this is an assembly or one component.
Source, license and scale
Source: projectfabmx contributors, revision 5235eb5cb8f85911624e1a71882feec9f4d4369e. Original and preview: CERN-OHL-P-2.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.
Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.
Hardware & parts
Assembly & first use
- Assembly
Choose one screw diameter/motor/revision; follow external build documentation and reconcile feedstock, debinding/sintering needs and controls. A CAD family is not one bill of materials.
Known prerequisites and unresolved assembly decisions; not a complete build instruction.
Cost
No current, complete configuration-specific build cost has been established for this profile.
Project notes
Mounting and application
Printer-derived extrusion subsystem; no robot-arm mount established. [1] [2]
Before sourcing the build
Choose one motor/revision. V1.4 filenames distinguish NEMA17/8mm and NEMA23/12mm; later revisions contain STEP, printable and laser-cut artifacts. These filename clues do not validate dimensions or fit. The README links the FabLab München wiki and fabmx.org; their parts lists and assembly coverage still need review. As an adaptation checklist, verify the chosen feedstock’s processing requirements—including whether debinding and sintering are needed—and establish compatible controls. A CAD family is not one bill of materials. [1] [2]
Files and reuse terms
README explicitly grants CERN-OHL-P v2 despite no GitHub license classification. [1] [2]
The FabLab München resource is an upstream-linked starting point, not a build guide verified by this review. The inspected repository inventory and README do not establish a complete, matched mechanical and control package. Current delivered cost and measured performance are not established; no hardware was built or tested for this profile.
What we checked
Source research only. No hardware assembly, performance testing, procurement or support qualification performed.
Not yet established
- Requirements: operating system, host computer, tools
- A step-by-step setup summary
Updates
- Upstream last updated
- Not established
- Latest release
- Not established
- Profile updated
- Oct 25, 2026
- Sources last checked
- Sep 30, 2026
- Next review
- Oct 30, 2026
- Reviewed revision
5235eb5
Source files and licenses
README explicitly grants CERN-OHL-P v2 despite no GitHub license classification. Choose one screw diameter/motor/revision; follow external build documentation and reconcile feedstock, debinding/sintering needs and controls. A CAD family is not one bill of materials.
| Layer | Availability / license |
|---|---|
| mechanical design | available · CERN-OHL-P-2.0 README explicitly grants CERN-OHL-P v2 despite no GitHub license classification. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] |
| electronics | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] |
| firmware | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] |
| software | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] |
| documentation | available · License not fully assessed README explicitly grants CERN-OHL-P v2 despite no GitHub license classification. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] |
This profile scopes hardware tooling, without selecting a learned controller or training dataset.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
- S001 FabMX extruder pinned tree
Revision, date & where cited
github.com · revision
5235eb5· Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S002 FabMX extruder / README.md
Revision, date & where cited
ProjectFabMX · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S003 Upstream image and reuse attribution
Media-only review: Upstream illustration of the FabMX extruder assembly, not a photograph. Reuse basis: CERN-OHL-P-2.0; inspected README.md and the pinned file inventory for nearer notices. Original image unchanged; displayed responsively. This does not refresh technical or cost evidence.Revision, date & where cited
FabLab München e.V. · github.com · revision
5235eb5· Image SHA-256 9608d95d0bab06bbd26bc05436516f3d548d52974d05c0b9c87dcb3c78d08b18; repository · Accessed Oct 25, 2026
Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1
Change history
2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.
2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.