Open Source RoboticsRobots, software & learning

Flone

Robot / hardware build

Laser-cut quadrotor frame for carrying a smartphone or compact camera; the preserved frame files and original Spanish manual leave complete software and electronics reproduction unresolved. [1]

Build & first use →Official website

For
Makers able to reconcile fabrication drawings with a complete flight-control configuration [1]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream Flone build photograph from Drone Starting Kit (page 20), before propellers are installed.
Upstream Flone build photograph from Drone Starting Kit (page 20), before propellers are installed. Flone project / Drone Starting Kit contributors · CC-BY-SA-3.0. Embedded image extracted from page 20 of the source PDF and losslessly decoded to PNG; no retouching.
Licenses & related hardware
License
CC-BY-SA-3.0 · license not fully assessed for mechanical design · Details by part

Requirements · Research details and dates

On this page

Overview

Flone's primary repository contains a laser-cut quadrotor frame designed to carry a smartphone or compact camera. It provides fabrication drawings rather than a complete aircraft software distribution. This review preserved the frame archive and the original 47-page Spanish Drone Starting Kit manual, then visually inspected selected material pages. It did not validate the full assembly or flight sequence. [1] [5] [7] [8]

Is this for you?

Known limitations
  • Frame README names Creative Commons by-sa without a version
  • Manual has a separate CC BY-SA 3.0 link that does not resolve the frame grant
  • Complete matching flight firmware, application and electronics source not preserved
  • No fabrication, assembly, control-link or flight test performed

[1] [5] [6] [7] [8]

What you need

Host computer

Android smartphone control reported by the official project; complete matching application payload not preserved.

[6] [7]

Dependencies
  • Laser cutting and measured sheet material
  • Matched flight board, motors, ESCs, propellers and battery
  • Bluetooth module and compatible smartphone application for the reported phone-control route

[1] [6] [8]

Hardware & parts

Hardware configuration

Quadrotor with laser-cut frame for smartphone or compact-camera payload.

[1] [8]

Actuators
  • Brushless motors; original manual describes 28-12 1534 KV motors
  • Four 10 A ESCs described in the original manual

[8]

Controller

Original manual describes Multiwii a32u4 and Naze32 or Flip32 flight boards; exact board/firmware pairing remains unresolved.

[8]

Assembly & first use

Project documentation [1]

Assembly

Measure material thickness and select matching SVG or parametric frame; original manual recommends flat 30 x 30 cm plywood near 5 mm thickness.

[1] [8]

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. Design-source links are available, but the reviewed record does not establish unambiguous reuse rights for a hosted CAD preview.

Project notes

Select the drawing for the actual material

The frame README recommends 5 mm plywood, 4 mm MDF, 3 mm acrylic or 2 mm Acetal/Delrin. It tells builders to measure their stock and choose the nearest drawing or adapt the parametric design. The archive includes thickness-specific SVGs, 5 mm DXF/EPS/PDF variants, parametric SVGs and separate fabrication-service variants. Those files should not be treated as interchangeable just because they depict the same general frame. [1] [5]

Page 12 of the manual recommends flat, good-quality plywood near 5 mm thickness, with a 30 by 30 cm sheet and laser cutting. That supports a concrete fabrication route, but no drawing was cut, fit-checked or load-tested here. Material substitutions remain separate from evidence that a file exists. [8]

The original component guide is a starting point

The inspected manual pages describe 28-12 1534 KV brushless motors, 10 A electronic speed controllers and a 3S battery. Its flight-board page discusses Multiwii a32u4 and Naze32 or Flip32. These are historical configuration descriptions; they do not establish current stock, an exact board revision or a qualified set of replacements. A complete delivered build budget remains unknown. [8]

The official site describes Flone Remote control over Bluetooth, including telemetry, and mentions Multiwii and Naze32 with Cleanflight or Betaflight. It presents Wi-Fi as forthcoming. This review therefore does not treat Wi-Fi control as a demonstrated feature or assume that every mentioned firmware works with every board and phone. The exact application, firmware and electronics source payloads were not established by the preserved frame archive. [5] [6]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: operating system, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Jan 15, 2019 [2]
Latest release
Not established
Profile updated
Oct 26, 2026
Sources last checked
Oct 1, 2026
Next review
Oct 31, 2026
Reviewed revision
2dbf431addc66facba5ba5a17ea84569c3358520 (commit snapshot; no published stable release found) · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · License not fully assessed
SVG, DXF, EPS and PDF frame files available. README says Creative Commons by-sa without a version; no precise frame license normalized. File families need material and revision matching. [1] [5]
electronicsnot found · License not fully assessed
Project describes external components or software, but complete matching source payload for this layer was not established in the preserved frame archive and selected manual review. This is not a claim of closed source. [5] [6] [8]
firmwarenot found · License not fully assessed
Project describes external components or software, but complete matching source payload for this layer was not established in the preserved frame archive and selected manual review. This is not a claim of closed source. [5] [6] [8]
softwarenot found · License not fully assessed
Project describes external components or software, but complete matching source payload for this layer was not established in the preserved frame archive and selected manual review. This is not a claim of closed source. [5] [6] [8]
documentationavailable · CC-BY-SA-3.0
Grant applies to the original manual linked by its official page; not automatically to repository frame files. [7] [8] [9]

Selected frame and conventional phone-control route does not establish a learned model or training dataset requirement.

Keep the manual's license separate from the frame's

The frame README says Creative Commons by-sa without specifying a version. The official manual page separately links CC BY-SA 3.0 Unported and credits Lot Amorós for its idea/content and Jesus Parrilla for illustration/design. That manual-specific evidence does not resolve the repository's unspecified frame license. The catalog leaves the precise mechanical license unresolved rather than borrowing the manual's version. [1] [7] [9]

The project site also describes its software as GPL without a version in the inspected page. That statement alone is insufficient to normalize the license of a complete application and flight stack. No installation, soldering, radio-link test or flight was performed. The preserved material supports further configuration research and fabrication planning, with those limits visible. [5] [6] [8]

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.