Open Source RoboticsRobots, software & learning

Grabette

Robot / hardware build

Pollen Robotics handheld demonstration recorder (Raspberry Pi 4, fisheye camera, OAK-D SR, finger angle sensors) with an offline SLAM pipeline that exports LeRobot datasets. [1] [6] [7]

Build & first use →Official websiteUpstream build guideBill of materials

For
Robot-learning labs able to run Docker-based SLAM and write a robot integration [1] [7]
Cost
EUR 585.03 upstream parts estimate [8] · checked Oct 5, 2026 · DetailsNot included: printed parts and filament, post-processing workstation and target robot and Gripette and more.
Source rights
Named licenses are documented by part. Review licenses

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of the Grabette handheld interface, including its cameras and gripper.
Upstream photograph of the Grabette handheld interface, including its cameras and gripper. Pollen Robotics contributors · Apache-2.0. Original image unchanged; displayed responsively. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware

Requirements · Research details and dates

On this page

Overview

Grabette is a handheld data-collection device from Pollen Robotics, together with a pipeline that turns its recordings into LeRobot datasets. It is not a robot: the operator holds the device, whose finger joints carry angle sensors, while cameras and an IMU record the motion. The same repository also contains Gripette, a robot-mounted gripper on a Raspberry Pi Zero 2W with two STS3215 servos; an OpenArm integration; and a work-in-progress head-mounted device. This entry covers the handheld Grabette at release v1.0.1. Nothing was built, installed or recorded for this entry. [1] [2] [6] [10]

Is this for you?

Use cases
  • Handheld demonstration recording
  • SLAM trajectory recovery and LeRobot v3 dataset export
  • Diffusion Policy and π0.5 training on OpenArm-Gripette

[1] [7]

Known limitations
  • OAK-D SR required for trajectory recovery
  • STL meshes and the assembly PDF are Git LFS payloads not preserved here
  • Full CAD is an external Onshape document
  • Only OpenArm-Gripette integration provided

Source-review boundaries; no hardware tests.

[6] [9] [11] · Editorial assessment

More on fit and limitations

Who it suits

It suits labs collecting handheld demonstrations, UMI-style, that can run Docker on a workstation and integrate a target robot themselves. The README calls the collection pipeline robot-agnostic, but OpenArm with Gripette is the only robot integration provided; another arm needs its own integrations folder. [1] [11]

What you need

Operating system
  • Raspberry Pi OS Bookworm (Debian 12) and Trixie (Debian 13) on the device

[6]

Host computer

Raspberry Pi 4 on the device; a workstation with Docker for SLAM post-processing

[6] [7]

Dependencies
  • uv workspace
  • Docker image built from docker/oak_vslam (RTAB-Map v0.23.1)
  • LeRobot for dataset generation
  • picamera2/libcamera on the Pi
  • Git LFS for mesh assets

[1] [5] [6] [7]

Tools
  • FDM printer able to print PLA, PETG and TPU

[12]

Skills
  • Raspberry Pi setup
  • Docker
  • Python uv workspaces
  • Robot integration for deployment

Inferred from documented steps.

[1] [6] [7] · Editorial assessment

Hardware & parts

Upstream bill of materials [1] [8]

Hardware configuration

Handheld two-finger data-collection device; not actuated. Built as a left or right hand.

[6]

Controller

Raspberry Pi 4

[6]

Sensors
  • Raspberry Pi camera module with fisheye lens (1296×972 @ 46 fps)
  • OAK-D SR stereo RGB-D camera with on-board IMU (200 Hz)
  • 2× AS5600L rotary encoders on finger joints

[6]

Power

PiSugar3+ battery module listed in the BOM

[8]

Assembly & first use

Open the upstream getting-started guide [6]

  • Build the handheld device from the BOM, STEP files and assembly/print guides
  • Flash Raspberry Pi OS Lite (64-bit) and run make install-rpi HAND=left|right
  • Record episodes via the button or dashboard
  • Run grabette-postprocess SLAM in Docker and export a LeRobot dataset

[6] [7]

Assembly

packages/grabette/assembly holds left/right STEP files and assembly and print-guide PDFs; the assembly PDF is an LFS payload (about 24.7 MB) not preserved here.

[6] [9]

Calibration

Hand (left/right) chosen at install; angle-convention configuration documented in package docs (not inspected in detail).

[6]

Cost

VersionPrice
One Grabette handheld device (Grabette tab of the published BOM)EUR 585.03 [8]
Parts estimate

Upstream EUR column (USD column also given) · Checked 2026-10-05

IncludedRaspberry Pi 4 (4 GB); OAK-D SR; PiSugar3+; Arducam B0404; 128 GB SD card; Angle sensor modules, HAT, switch, cables, magnets, bushings, screws
Not includedPrinted parts and filament; Post-processing workstation; Target robot and Gripette; Shipping and taxes
StockSupplier stock not rechecked.
Delivery and taxNot established.
Price details

Published BOM total for one handheld device; sheet also gives US$655.88. OAK-D SR is €293.46 of the total. Not re-quoted.

Upstream EUR column (USD column also given) · Checked 2026-10-05 · Quantity 1

Printed parts; workstation with Docker; a robot for deployment.

Cost scope

The Grabette tab of the published BOM totals €585.03 (US$655.88) for one device. The OAK-D SR accounts for €293.46 of that, about half. Printed parts and filament, the workstation and any target robot are not in the sheet. These are the sheet's figures, not re-quoted prices. [8]

3D preview

Preview not available yet. Design-source links are available. A configuration-matched assembly and its file-level reuse scope have not yet been reviewed for a hosted preview.

Project notes

What the device contains

The handheld device runs a Raspberry Pi 4 with a fisheye Raspberry Pi camera module (1296×972 at 46 fps) and an OAK-D SR stereo RGB-D camera. The OAK-D SR supplies depth and its on-board IMU supplies inertial data; the README marks the camera as required for trajectory recovery and notes that its stream is off by default to save battery, so it must be switched on before recording episodes for the pipeline. Two AS5600L encoders measure the proximal and distal finger joints, and a Grove LED button starts and stops recording. Each device is built as a left or right hand, chosen at install time. The software is tested on Raspberry Pi OS Bookworm and Trixie and serves a dashboard on port 8000. The BOM also lists a PiSugar3+ battery, a 128 GB SD card and a Raspberry Pi HAT. [6] [8]

From recording to dataset

grabette-postprocess runs offline RTAB-Map visual-inertial SLAM in a locally built Docker image to recover camera trajectories, then writes LeRobot v3 datasets as Parquet and MP4. The device README also mentions uploading episodes to Hugging Face "for cloud SLAM processing"; the inspected postprocess guide documents only the local Docker route. Python requirements need checking: the root README says postprocessing needs Python 3.12 or newer, while the postprocess README says 3.11 or newer. Diffusion Policy and π0.5 training integrations are included. [1] [6] [7]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links. AI-assisted drafting with a separate LLM editorial judge; no independent human technical review.

Updates

Upstream last updated
Jul 17, 2026 [2]
Latest release
Jul 21, 2026 [2]
Profile updated
Oct 25, 2026
Sources last checked
Oct 5, 2026
Next review
Nov 5, 2026
Reviewed revision
v1.0.1 (published 2026-07-21; commit dcad06fbd7bf0e80fb2e36b375b1b3dd49d008bc) · software repository

Source files and licenses

Software, documentation and STEP part files are released under Apache-2.0 with notices; the full Onshape CAD is external, and STL and assembly-guide payloads sit in Git LFS.

LayerAvailability / license
mechanical designavailable · Apache-2.0
Left and right STEP part files in packages/grabette/assembly under the package Apache-2.0 LICENSE; STL copies are LFS pointers. Full Onshape CAD is external and not preserved; its license coverage is not established. STEP geometry not inspected. [1] [6] [9]
electronicsnot found · License not fully assessed
Off-the-shelf modules (Pi 4, OAK-D SR, encoders, HAT); no custom PCB or wiring design files identified. [6] [8]
softwareavailable · Apache-2.0
Device service, post-processing and integrations; third-party components listed with their own licenses. [1] [3] [4] [5]
documentationavailable · Apache-2.0
Package READMEs and docs in the repository. [1] [3] [6]

Device runs Python services on Raspberry Pi OS; no microcontroller firmware in the handheld configuration.

No trained weights distributed in the inspected sources.

Users record their own; no dataset distributed in the inspected sources.

Sources and licenses

The repository carries an Apache-2.0 LICENSE, a NOTICE crediting Pollen Robotics and a third-party notices file listing RTAB-Map (BSD-3-Clause), DepthAI (MIT), OpenArm and LeRobot (Apache-2.0) and onshape-to-robot (MIT). The device package has its own Apache-2.0 LICENSE, and its assembly folder holds left and right STEP part files. The STL copies, the assembly PDF and the print-guide PDF are Git LFS pointers in the archive. The print guide's payload was retrieved separately and matches its pointer checksum; it splits parts across PLA, PETG and TPU soft tips, with 0.2 mm layers and 30 to 100% infill depending on the part. The 24.7 MB assembly PDF and the STL payloads were not preserved, and STEP geometry was not inspected. The full CAD is an external Onshape document; whether the Apache-2.0 grant covers it is not established. [1] [3] [4] [5] [6] [9] [12]

Release v1.0.1 was published on July 21, 2026, from a commit dated July 17; the repository had 118 GitHub stars at retrieval, a dated popularity signal only, and its default branch has moved on since the release. [2]

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

  • S001 GRABETTE README
    Toolkit purpose, components, BOM and Onshape links, LFS note, development requirements, license.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · revision dcad06f · README.md at release v1.0.1 () · Accessed Oct 5, 2026


    Used for: Overview, Is this for you?, What you need, Hardware & parts and 2 more
  • S002 Release v1.0.1 and acquisition metadata
    Latest stable release selected; archive SHA-256 recorded; dated repository popularity.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · GitHub release v1.0.1 published 2026-07-21; tagged commit dated 2026-07-17; manifest retrieved 2026-10-05 · Accessed Oct 5, 2026


    Used for: Overview, What we checked, Source files and licenses
  • S003 GRABETTE license
    Repository license file.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · revision dcad06f · LICENSE (Apache License 2.0 text) · Accessed Oct 5, 2026


    Used for: Source files and licenses
  • S004 GRABETTE NOTICE
    Copyright 2026 Pollen Robotics; Apache-2.0; third-party notice pointer.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · revision dcad06f · Accessed Oct 5, 2026


    Used for: Source files and licenses
  • S005 GRABETTE third-party notices
    Third-party components and licenses.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · revision dcad06f · Accessed Oct 5, 2026


    Used for: What you need, Source files and licenses
  • S006 Grabette device package README
    Handheld hardware table, BOM/CAD/assembly links, Raspberry Pi install, hand selection, dashboard.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · revision dcad06f · Accessed Oct 5, 2026


    Used for: Overview, Is this for you?, What you need, Hardware & parts and 4 more
  • S007 grabette-postprocess README
    Offline RTAB-Map SLAM in Docker and LeRobot v3 dataset generation.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · revision dcad06f · Accessed Oct 5, 2026


    Used for: Is this for you?, What you need, Assembly & first use, From recording to dataset
  • S008 Grabette bill of materials (published Google Sheet, Grabette tab)
    Per-part EUR and USD prices and device total.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · docs.google.com · CSV of the published Grabette tab (gid 0); snapshot sha256 e4b87742d817… retrieved 2026-10-05 · Accessed Oct 5, 2026


    Used for: Hardware & parts, Cost, What the device contains, Source files and licenses
  • S009 Release archive inventory and LFS check
    Left/right STEP part files present; STL meshes and assembly/print PDFs are Git LFS pointers; package-level Apache-2.0 LICENSE.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · revision dcad06f · Filename inventory of the v1.0.1 archive (800 members), .gitattributes, LFS pointer files and packages/grabette/LICENSE · Accessed Oct 5, 2026


    Used for: Is this for you?, Assembly & first use, Source files and licenses
  • S010 Gripette package README
    Robot-mounted gripper hardware: Pi Zero 2W, camera, two STS3215 servos, optional OAK-D SR.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · revision dcad06f · Accessed Oct 5, 2026


    Used for: Overview
  • S012 Grabette 3D print guide (PDF, LFS payload)
    Material and print settings per part group.
    Revision, date & where cited

    Pollen Robotics SAS · github.com · revision dcad06f · LFS payload fetched from media.githubusercontent.com at ; sha256 9a75d40f3900… matches the pointer OID · Accessed Oct 5, 2026


    Used for: What you need, Source files and licenses
  • S011 OpenArm-Gripette integration README
    Custom 7-DoF OpenArm follower with Gripette; sim/real gRPC design.
    Revision, date & where cited

    Pollen Robotics / GRABETTE contributors · github.com · revision dcad06f · Accessed Oct 5, 2026


    Used for: Is this for you?
  • S013 Upstream image and reuse attribution
    Media-only review: Upstream photograph of the Grabette handheld interface, including its cameras and gripper. Reuse basis: Apache-2.0; inspected packages/grabette/LICENSE and the pinned file inventory for nearer notices. Original image unchanged; displayed responsively. This does not refresh technical or cost evidence.
    Revision, date & where cited

    Pollen Robotics contributors · github.com · revision dcad06f · Image SHA-256 d431b576d23df1e046d9ac5f0fe5d8121821d8a032f05b43c278bdd41d740973; repository · Accessed Oct 25, 2026

Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5

Change history

2026-10-05 — Created from Growbotics-listing lead; all claims checked against preserved upstream sources. No physical build or test.

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.