Open Source RoboticsRobots, software & learning

iCub

Robot / hardware build

A research humanoid family whose hardware revisions, robot configuration and software distribution must be matched before reproduction. [1]

Build & first use →Official websiteUpstream build guide

For
Humanoid research laboratories; Experienced C++ robotics developers [1]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Historical photograph of an iCub mounted on a supporting frame (uploaded in 2010); later iCub versions may differ.
Historical photograph of an iCub mounted on a supporting frame (uploaded in 2010); later iCub versions may differ. Jll at English Wikipedia · CC-BY-SA-3.0. Original image unchanged; displayed responsively. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
License
Mixed/unreconciled: COPYING GPL-2.0-or-later; LICENSE BSD-3-Clause, BSD-3-Clause · license not fully assessed for mechanical design, electronics · Details by part

Requirements · Research details and dates

On this page

Overview

iCub is a family of research humanoids, not a single set of parts identified by the icub-main release number. The official hardware table distinguishes changes to hands, tactile sensing, cameras, compute and batteries across versions. For example, its v2.10 entry adds 4K FRAMOS cameras and an Orin NX to a v2.7-based platform; the experimental v3 family is listed separately. These distinctions must be resolved before a lab can reproduce another installation. [5]

Is this for you?

Known limitations
  • icub-main release is not an iCub hardware revision
  • Robot-specific manufacturing pack, BOM and current complete cost remain unresolved
  • Multiple license declarations require file-level reconciliation

[5] [6] [7] [8] [10]

3D preview

iCub v2.7 simulation model. The official iCubGazeboV2_7 visual model at zero joint positions, with source link hierarchy and component placement. This v2.7 example does not represent every iCub revision, including v2.10 or iCub3, and is not manufacturing CAD or a demonstration of motion.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original URDF source bundle (ZIP) · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: Istituto Italiano di Tecnologia / robotology contributors, revision dca8c618c264be70ce285bad38040411725e3551. Original and preview: CC-BY-SA-4.0. Preview conversion by Open Source Robotics; source files unchanged inside the downloadable bundle. Preview coordinates are centered and rounded to six decimal places. URDF visual origins, mesh scales and joint transforms applied at zero joint positions, then metres converted to millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

What you need

Host computer

Developer machine, robot laptop and icub-head have different documented installation roles

[5] [6] [7] [8] [10]

Dependencies
  • Select a released robotology-superbuild distribution for a matched software set
  • Robot-specific configuration and firmware require separate matching

[5] [6] [7] [8] [10]

Skills
  • C++ development
  • Robot configuration and platform-specific installation

[5] [6] [7] [8] [10]

Hardware & parts

Hardware configuration

Research humanoid family; hardware revision not selected

[5] [6] [7] [8] [10]

Assembly & first use

Open the upstream getting-started guide [5] [6] [7] [8] [10] · Project documentation [5] [6] [7] [8] [10]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Start from the robot's configuration

The hardware documentation points to separate mechanical CAD libraries, robot mechanics, electronics boards and wiring repositories. It also treats upgrade kits and tendon replacement as their own tasks. The preserved icub-main package is therefore a software starting point, not a complete manufacturing archive. This review has not selected a physical revision or verified its BOM, controller firmware, delivered cost or replacement-part supply. [1] [4] [8]

The inspected documentation is maintained under MESH, with its source snapshot preserved alongside the main software. Use that hardware version table and the robot's actual installed configuration to narrow the next review. [5] [8]

Preserve a distribution, not only icub-main

The installation guide distinguishes a developer computer from the special icub-head setup. It recommends released software distributions for users outside the core development team, with robotology-superbuild providing a coordinated source-installation route. The Linux guide explicitly checks out a dated distribution tag before following the superbuild instructions. Capturing one icub-main release does not pin that distribution or establish that it will run on a particular robot. [6] [7]

Licensing also needs a closer pass before reuse. The inspected main archive contains a GPL-2.0-or-later declaration in COPYING and a BSD-3-Clause declaration in LICENSE, plus additional license files. We retain that unresolved file-level scope rather than labeling the entire robot BSD or GPL. No software installation, robot calibration or hardware test was carried out. [3] [10]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: operating system, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Jul 24, 2026 [2]
Latest release
Jul 24, 2026 [2]
Profile updated
Oct 26, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
icub-main 719ae2a66be7175efc9b9bb99dc72ce2fda0449e (release v2.12.1); relocated documentation 4df9fd755f0d2054ce93144e457a517c442d929f (commit snapshot). No matched complete physical robot build selected. · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · License not fully assessed
Official hardware index links this separate repository. Contents, matched revision and manufacturing rights remain unreviewed; icub-main archive is not a hardware copy. [8]
electronicsavailable · License not fully assessed
Official hardware index links this separate repository. Contents, matched revision and manufacturing rights remain unreviewed; icub-main archive is not a hardware copy. [8]
firmwarenot found · License not fully assessed
Complete matched robot firmware not established in inspected main software and documentation; separate firmware/configuration review required. [4] [8]
softwareavailable · Mixed/unreconciled: COPYING GPL-2.0-or-later; LICENSE BSD-3-Clause
Do not apply one root declaration to all files. A component-level license inventory remains necessary. [3] [10]
documentationavailable · BSD-3-Clause
Inspected documentation repository declaration; not a license for the entire robot. [11]

No particular learned policy or dataset selected by this family-level source review.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

Videos

  • S012 A Cartesian 6-DoF Gaze Controller for Humanoid Robots (YouTube video)
    Video from the project’s own channel (iCub HumanoidRobot), linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video iCub HumanoidRobot · youtube.com · Accessed Oct 4, 2026

  • S013 motionCUT (YouTube video)
    Video from the project’s own channel (iCub HumanoidRobot), linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video iCub HumanoidRobot · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.5.0-draft.1

Change history

2026-10-04 — Added 2 YouTube reference(s) (S012, S013): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.