Open Source RoboticsRobots, software & learning

igus Humanoid Open Platform

Robot / hardware build

A humanoid soccer research platform with a released load-bearing plastic body design and a separately maintained ROS framework. [1]

Build & first use →Official website

For
Humanoid research groups; Experienced builders investigating historical soccer platforms [1]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware
License
CC-BY-SA-3.0, BSD-3-Clause · license not fully assessed for documentation · Details by part

Requirements · Research details and dates

On this page

Overview

The igus hardware repository preserves 37 STEP files for the humanoid's body, plus a historical brochure. Its README dates the design description to October 2015 and explicitly describes the files as the outer shell. The brochure explains that these plastic parts also form the load-bearing structure. This is useful manufacturing source material, but the file count does not establish a complete robot kit or procurement list. [1] [4] [5]

Is this for you?

Known limitations
  • 37 released STEP files describe the body, not a complete procurement or electronics manufacturing pack
  • Historical brochure specifications require matching to the chosen revision
  • Legacy software dependencies and current replacements are untested

[1] [4] [5] [7]

3D preview

Left foot base plate. This preview shows one component, not the complete robot.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original STEP · File checksums and provenance

This model contains one geometric body.

Source, license and scale

Source: igus GmbH, revision ee0ba7fdc870af7c82d55a9a982111e545f575ae. Original and preview: CC-BY-SA-3.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

What you need

Host computer

Historical brochure specifies a quad-core PC; software release documentation targets Ubuntu 14.04 and ROS Indigo

[1] [4] [5] [7]

Tools
  • Appropriate plastic fabrication service; brochure describes laser sintering
  • Electronics assembly and mechanical fitting tools after full BOM reconciliation

[1] [4] [5] [7]

Hardware & parts

Hardware configuration

Humanoid soccer research platform; captured CAD covers the body shell

[1] [4] [5] [7]

Actuators
  • 2014 brochure: 20 networked actuators; exact component BOM not reconciled

[1] [4] [5] [7]

Sensors
  • Wide-angle camera(s)
  • Inertial sensors

[1] [4] [5] [7]

Dimensions

2014 brochure reports 90 cm height

[1] [4] [5] [7]

Assembly & first use

Project documentation [1] [4] [5] [7]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Treat fabrication and component sourcing as separate work

The brochure describes laser-sintered plastic construction and reports a 90 cm platform with 20 networked actuators, a quad-core PC, wide-angle cameras, inertial sensing and a lithium-polymer battery. Those historical specifications describe the platform; they do not identify a current compatible shopping basket. The preserved STEP collection does not resolve actuator availability, the complete electronics set, cable preparation or calibration. [4] [5]

Before ordering a body, select the fabrication process and reconcile the purchased components with the mechanical interfaces. A print quotation alone would omit electronics, actuators, compute, power, tools and integration. No current delivered build total or complete revision-matched assembly procedure was established in this review. [1] [4] [5]

Preserve the software separately

The related AIS-Bonn ROS framework is a different repository, now preserved at its own commit. Its release documentation specifies Ubuntu 14.04 and ROS Indigo. These legacy prerequisites matter when estimating setup work: a download is not evidence that the framework runs unchanged on a current workstation or that a replacement controller is compatible. No software installation or robot operation was reproduced here. [6] [7]

The body README declares CC BY-SA 3.0 for the released data, while the framework carries BSD-3-Clause terms. Keep those scopes with their artifacts and separately assess purchased components. The next build decision needs a reconciled component list and software configuration, followed by actual fabrication, calibration and maintenance trials. [1] [6]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: operating system
  • A step-by-step setup summary

Updates

Upstream last updated
Oct 5, 2015 [2]
Latest release
Not established
Profile updated
Sep 30, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
ee0ba7fdc870af7c82d55a9a982111e545f575ae (commit snapshot; no published stable release found) · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · CC-BY-SA-3.0
Declared terms for the released body STEP data; not a license for every purchased component. [1] [4]
electronicsnot found · License not fully assessed
Complete electronics manufacturing and actuator/controller firmware sources are not established by the body repository. [1] [4]
firmwarenot found · License not fully assessed
Complete electronics manufacturing and actuator/controller firmware sources are not established by the body repository. [1] [4]
softwareavailable · BSD-3-Clause
Separately preserved framework, not a tested hardware/software pairing. [6] [7]
documentationavailable · License not fully assessed
Repository description, historical brochure and legacy software documentation inspected. [1] [5] [7]

No particular learned policy or dataset selected in this review.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.5.0-draft.1

Change history