Jubilee tool ecosystem
End effectorKinematic tool-changing ecosystem including extrusion and pen tools; liquid-handling use is reported. [1] [2] [3]
Build & first use →Official website
- Cost
- No current cost or bill of materials established yet.
- Source rights
- Some licenses are unresolved. Review licenses
- Unknowns
- host computer, tools, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware
- License
- CC-BY-4.0 · license not fully assessed for documentation · Details by part
Is this for you?
3D preview
Jubilee tool-template assembly. Upstream tool-template assembly, not the complete Jubilee machine or a selected payload tool.
The 3D preview loads after the page.
Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.
Download original STEP · File checksums and provenance
Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.
Model sources
The preview uses the linked original design. Source grouping is retained where present; the caption identifies whether this is an assembly or one component.
Source, license and scale
Source: Joshua Vasquez / Jubilee contributors, revision c877bd2e889560c83da2a68479641a4f7f0d9b83. Original and preview: CC-BY-4.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.
Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.
Hardware & parts
Assembly & first use
Project documentation [1] [2] [3] [4] [5]
- Assembly
Treat as transferable tool-interface designs. Scope individual tools and docking/load constraints; do not assume gravity/orientation-independent operation on an arm.
Known prerequisites and unresolved assembly decisions; not a complete build instruction.
Cost
No current, complete configuration-specific build cost has been established for this profile.
Project notes
Mounting and application
CoreXY platform with E3D-compatible tool plates; not a robot-arm automatic tool changer. [1] [2] [3] [4] [5]
Before sourcing the build
Start with the pinned tool-template directories and tools/jubilee_tools/tool_posts/configurable_tool_post. They include STEP and SolidWorks templates, fabrication exports and parking-post variants; distinguish these tool-interface files from the machine frame. The README links assembly instructions and a BOM, whose complete linked contents were not reviewed here. Match the selected tool and dock, and assess load and orientation constraints before an arm adaptation. [1] [2] [3] [4] [5]
Files and reuse terms
CC-BY-4.0 stated in license and README. [1] [2] [3] [4] [5]
The README reports Duet configuration files and slicer settings. Their match to the selected tooling remains unverified; source availability and licenses for standalone controls and purchased components require separate review. The repository’s CC-BY-4.0 attribution requirement does not resolve every component’s rights. Current delivered cost and measured performance are not established; no hardware was built or tested for this profile.
What we checked
Source research only. No hardware assembly, performance testing, procurement or support qualification performed.
Not yet established
- Requirements: operating system, host computer, tools
- A step-by-step setup summary
Updates
- Upstream last updated
- Not established
- Latest release
- Not established
- Profile updated
- Oct 25, 2026
- Sources last checked
- Sep 30, 2026
- Next review
- Oct 30, 2026
- Reviewed revision
c877bd2
Source files and licenses
CC-BY-4.0 stated in license and README. Treat as transferable tool-interface designs. Scope individual tools and docking/load constraints; do not assume gravity/orientation-independent operation on an arm.
| Layer | Availability / license |
|---|---|
| mechanical design | available · CC-BY-4.0 CC-BY-4.0 stated in license and README. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] [5] |
| electronics | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] |
| firmware | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] |
| software | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] |
| documentation | available · License not fully assessed CC-BY-4.0 stated in license and README. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] [5] |
This profile scopes hardware tooling, without selecting a learned controller or training dataset.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
- S001 Jubilee tool ecosystem pinned tree
Revision, date & where cited
github.com · revision
c877bd2· Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S002 Jubilee tool ecosystem / README.md
Revision, date & where cited
machineagency · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S003 Jubilee tool ecosystem / license.txt
Revision, date & where cited
machineagency · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S004 frame/fabrication_exports/laser_cut_parts/README.md
Revision, date & where cited
machineagency · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Assembly & first use, Mounting and application, Before sourcing the build, Files and reuse terms and 1 more - S005 frame/fabrication_exports/machined_parts/crossbar/carbon_fiber_crossbar/README.md
Revision, date & where cited
machineagency · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Assembly & first use, Mounting and application, Before sourcing the build, Files and reuse terms and 1 more - S006 Upstream image and reuse attribution
Media-only review: Upstream photograph of a Jubilee machine with its tool system; the complete machine is wider context for the tool designs. Reuse basis: CC-BY-4.0; inspected license.txt and the pinned file inventory for nearer notices. Original image unchanged; displayed responsively. This does not refresh technical or cost evidence.Revision, date & where cited
Joshua Vasquez and Jubilee contributors · github.com · revision
c877bd2· Image SHA-256 bbb629fc4dc1b68f53816c0899557d9c312d9d98885b6be4a19ca30bf3f92c0c; repository · Accessed Oct 25, 2026
Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1
Change history
2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.
2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.