Open Source RoboticsRobots, software & learning

MAGPIE gripper

End effector

Two AX-12A servos drive parallel fingers through four-bar linkages; OpenRB-150 control and a palm RealSense D405. [1] [2] [3] [4] [5] [6]

Build & first use →Official website

For
Builders evaluating this tooling design and its integration requirements [1] [2] [3] [4] [5] [6] [7] [8]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of the MAGPIE gripper assembly.
Upstream photograph of the MAGPIE gripper assembly. Correll Robotics Lab and MAGPIE contributors · MIT. Original image unchanged; displayed responsively.
Licenses & related hardware
License
MIT · license not fully assessed for documentation · Details by part

Research details and dates

On this page

Overview

MAGPIE combines two AX-12A servos, four-bar finger linkages, an OpenRB-150 controller and a palm-mounted RealSense D405 camera. Its V2 design is useful for studying a camera-equipped gripper, but an identified base-export problem should be resolved before fabrication. [3] [7]

Is this for you?

Known limitations
  • V2 README flags identical top/bottom base exports despite differing assembly descriptions. Resolve that geometry before quoting or building. Software and host-arm mounting must match V2.
  • No hardware build or test performed.

Source-researched; no physical verification.

[1] [2] [3] [4] [5] [6] · Editorial assessment

Hardware & parts

Hardware configuration

Parallel and adaptive grippers

Source-researched; no physical verification.

[1] [2] [3] [4] [5] [6] · Editorial assessment

Assembly & first use

Project documentation [1] [2] [3] [4] [5] [6] [7] [8]

Assembly

V2 README flags identical top/bottom base exports despite differing assembly descriptions. Resolve that geometry before quoting or building. Software and host-arm mounting must match V2.

Known prerequisites and unresolved assembly decisions; not a complete build instruction.

[1] [2] [3] [4] [5] [6] [7] [8] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. Mesh files were identified. Their source inventory does not by itself establish assembly hierarchy or component placement.

Project notes

Select the V2 parts

Start with Documentation/BOM.md and Documentation/assembly.md in the pinned hardware repository. The V2 list includes printed PLA parts, six bearings and M2/M3 fasteners. The upstream approximate total is $455.28; the displayed line amounts add to $455.27. The one-cent discrepancy does not make either number a current delivered quote. Currency region, supplier stock, tax, shipping and the full host-arm integration budget have not been verified. [4] [5]

The CAD README warns that the top and bottom base exports are identical even though their assembly descriptions differ. Check corrected geometry with the maintainer before printing or pricing a complete V2 build. [7]

Mounting and controls

The lab documents a UR5 setup, but that application does not establish that the pinned V2 parts fit an arbitrary Universal Robots arm. The hardware README points to correlllab/MAGPIE for control software; match that software revision, wiring and host-arm mount to V2 before operating it. [6] [3]

What we checked

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 25, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
030623a

Source files and licenses

MIT; current hardware README explicitly covers models and build documentation. V2 README flags identical top/bottom base exports despite differing assembly descriptions. Resolve that geometry before quoting or building. Software and host-arm mounting must match V2.

LayerAvailability / license
mechanical designavailable · MIT
MIT; current hardware README explicitly covers models and build documentation. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] [5] [6] [7] [8]
electronicsnot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] [6] [7] [8]
firmwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] [6] [7] [8]
softwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] [6] [7] [8]
documentationavailable · License not fully assessed
MIT; current hardware README explicitly covers models and build documentation. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] [5] [6] [7] [8]

This profile scopes hardware tooling, without selecting a learned controller or training dataset.

Source rights and limits

The hardware README applies MIT terms to the models and build documentation, consistent with the root license. It also identifies separate MIT software. The matching control revision and source coverage of purchased servos, electronics and camera remain separate checks. No assembly or performance test has been performed for this profile. [2] [3]

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.