Open Source RoboticsRobots, software & learning

Maker's Pet Snoopy

Robot / hardware build

300 mm 3D-printable differential-drive pet robot with an ESP32, BLDC gear motors, a 360-degree LiDAR and a phone or tablet head, run through the shared Kaia.ai ROS 2 stack; pet character and skills are upstream work in progress. [1] [8] [15]

Build & first use →Official websiteUpstream build guideBill of materials

For
Makers with a 300 × 300 mm-class 3D printer who can configure ESP32 firmware, ROS 2 and a LiDAR [1] [9] [15]
Cost
USD 199.60 upstream parts estimate [8] · checked Oct 5, 2026 · DetailsNot included: smartphone or tablet head, PC and 3D printer (listed as bring-your-own), optional cliff and bumper sensors (about $1 each per the page) and fasteners and wiring not itemized and more.
Source rights
Named licenses are documented by part. Review licenses

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of the MakersPet Snoopy robot enclosure and sensor configuration.
Upstream photograph of the MakersPet Snoopy robot enclosure and sensor configuration. MakersPet contributors · Apache-2.0. Original image unchanged; displayed responsively. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
Ecosystem
ROS 2, Arduino

Requirements · Research details and dates

On this page

Overview

Snoopy is a round, two-wheel differential-drive pet robot that maps rooms and navigates with ROS 2. An ESP32 runs the onboard firmware, a 360-degree LiDAR supplies scans, and a phone or 7-inch tablet serves as the head display and camera. SLAM, Nav2 and Gazebo run on a separate PC; the platform README offers Docker on Windows or Linux and Ubuntu 24.04, untested here with this snapshot. The maker lists character and skill programming as work in progress, so the documented workflow is mapping and navigation rather than pet behaviour. [1] [9] [15]

Is this for you?

Use cases
  • Room mapping with a 360-degree laser distance sensor
  • Autonomous indoor navigation
  • Modding a ROS 2 robot description for a custom robot

[1] [6]

Known limitations
  • Pet character and skills described upstream as work in progress
  • No Snoopy-named board configuration in the pinned shared firmware
  • Design source for the brushless ESP32 board not identified
  • Linked CAD repository listed but not preserved (archive over 150 MiB)
  • Upstream BOM total does not reproduce exactly from its line items

Source-review boundaries; no hardware tests.

[1] [8] [9] [10] [14] · Editorial assessment

What you need

Operating system
  • Docker on Windows or Linux
  • Ubuntu 24.04

Current Kaia.ai platform README; compatibility with this 2025 description snapshot not tested.

[15]

Host computer

ESP32 on the robot; SLAM, Nav2 and Gazebo run on a separate PC. The BOM lists the PC and the phone/tablet head as bring-your-own.

[8] [15]

Dependencies
  • kaiaai/firmware ESP32 Arduino micro-ROS firmware
  • Kaia.ai ROS 2 packages (kaiaai_bringup, kaiaai_gazebo, kaiaai_teleop)
  • Cartographer, Nav2 and Gazebo via the Kaia.ai launch files

[1] [6] [15]

Tools
  • 3D printer with at least a 300 × 300 mm build volume
  • PC for firmware upload and ROS 2

[8] [9]

Skills
  • Large-format 3D printing
  • ESP32/Arduino firmware configuration and flashing
  • ROS 2 setup via Docker or Ubuntu

Editorial assessment from documented workflow.

[1] [9] [12] [15] · Editorial assessment

Hardware & parts

Upstream bill of materials [8]

Hardware configuration

Round two-wheel differential-drive base with a caster, LiDAR puck and a tilted phone/tablet head.

[1] [5]

Actuators
  • Two CHR-GM25-BLDC2418 brushless gear motors with built-in encoder and controller (BOM page)

[8] [10]

Controller

ESP32 (ESP-WROOM-32) with a breakout PCB and voltage regulator module

[8]

Sensors
  • YDLIDAR X4 laser distance scanner (BOM and telemetry default)
  • Phone or tablet camera
  • Optional 5 cliff and 4 bumper sensors

[1] [7] [8] [9]

Power

Battery with cable (about USD 50 in the 2023 BOM); the CAD listing includes an optional 18650 battery holder and case

[8] [10]

Dimensions

300 mm base diameter, 67 mm wheels, 0.263 m wheel separation (URDF); requires a 300 × 300 mm or larger print volume

[5] [9]

Assembly & first use

Open the upstream getting-started guide [1] · Project documentation [9]

  • Print the snoopy_300mm STL/3MF parts on a 300 × 300 mm or larger bed
  • Source the ESP32, BLDC motors, LiDAR, battery and regulator against the dated BOM
  • Flash the shared Kaia.ai firmware and write a board/motor configuration for this build
  • Install the Kaia.ai ROS 2 environment and select the makerspet_snoopy description
  • Try mapping and navigation in Gazebo before the physical robot

Editorial source-navigation sequence, not reproduced instructions.

[1] [6] [8] [9] [12] [14] [15] · Editorial assessment

Assembly

README assembly video is labeled for the Loki and Fido models; no Snoopy-specific written assembly guide identified in the inspected sources.

Video content not reviewed.

[1] · Editorial assessment

Cost

VersionPrice
Snoopy minimum BOM published September 20, 2023 (ESP32, two CHR-GM25-BLDC2418 motors, YDLIDAR X4, battery, breakout PCB, 1 kg filament)USD 199.60 [8]
Parts estimate

Amazon/AliExpress examples; destination unspecified · Checked 2026-10-05

IncludedESP32 and voltage regulator; Battery with cable; YDLIDAR X4 with cable; Two BLDC motors and 65 mm tires with adapters; Breakout PCB, resistors, connectors; 1 kg PETG or PLA filament
Not includedSmartphone or tablet head, PC and 3D printer (listed as bring-your-own); Optional cliff and bumper sensors (about $1 each per the page); Fasteners and wiring not itemized; Shipping and taxes not stated
StockPrices as of 09/2023; not re-quoted.
Delivery and taxNot stated on the page; destination costs not established.
Price details

Upstream total $199.60 as of 09/2023; the listed quantities and unit prices sum to $196.40, so the line items do not reproduce the stated total exactly. Historical estimate, not a current quote.

Amazon/AliExpress examples; destination unspecified · Checked 2026-10-05 · Quantity 1

Phone/tablet, PC, large-format printer, matched driver electronics and firmware configuration.

Cost scope

The September 2023 BOM page lists an ESP32, regulator, battery, YDLIDAR X4, two CHR-GM25-BLDC2418 motors, tires, a breakout PCB and 1 kg of filament, totalling $199.60. The phone or tablet, PC and printer are bring-your-own at $0, and optional cliff and bumper sensors cost about $1 each extra. The listed quantities and unit prices sum to $196.40, so the stated total does not reproduce exactly. Treat it as a dated parts estimate, not a current quote. [8]

3D preview

Preview not available yet. Design-source links are available. A configuration-matched assembly and its file-level reuse scope have not yet been reviewed for a hosted preview.

Project notes

What the Snoopy repository contains

The pinned makerspet_snoopy repository is a ROS 2 description package: a URDF robot model plus commands that run simulation, Cartographer mapping and navigation through the shared Kaia.ai packages. Its URDF gives a 300 mm base, 67 mm wheels and about 0.263 m between wheels, and its telemetry file defaults to a YDLIDAR X4. The README links the STL, 3MF, firmware and KiCad files in separate repositories. [1] [4] [5] [6] [7]

Printable parts live in makerspet/3d_models, which lists Snoopy plates, BLDC motor brackets, a YDLIDAR mount, optional bumper and cliff-sensor parts, and a Fusion 360 archive. That repository exceeded the catalog's 150 MiB archive limit, so the file list was preserved but no geometry was opened. The maker page says the parts need a 300 × 300 mm or larger print bed. The README's assembly video is labeled for the Loki and Fido models, and no Snoopy-specific written assembly guide was identified; the video was not reviewed, so plan to use the linked support forum for assembly questions. [1] [9] [10]

Firmware and electronics to reconcile

The README links the shared kaiaai/firmware ESP32 code, which the Kaia.ai platform README describes as the firmware for its robots. The firmware README says it supports ESC-style BLDC motors with PWM, direction and FG pins. However, the board configurations shipped in the pinned snapshot name Mini-family boards and a makerspet_vac BLDC board, not Snoopy. A builder must write or adapt a configuration for their own board, motors and LiDAR. [1] [12] [14] [15]

The README's KiCad link now resolves to makerspet/store. That snapshot holds schematic PDFs, STEP files and one Gerber archive for named boards such as BRK-30P, BDC-30P and an LDS02RR adapter, none labeled for Snoopy, and no editable KiCad project. The 2023 Snoopy page says a brushless ESP32 board was still planned for the store. A matched Snoopy driver-board design was not identified in the inspected sources. [9] [16] [17]

What we checked

Source research only; no installation, physical build, calibration or test performed. No affiliate links; Maker's Pet store prices on the cited pages were not used as costs.

Updates

Upstream last updated
Jan 5, 2025 [2]
Latest release
Not established
Profile updated
Oct 25, 2026
Sources last checked
Oct 5, 2026
Next review
Nov 5, 2026
Reviewed revision
makerspet/makerspet_snoopy d035f9511cfc20c9ade84e05b4e0b28a3b1f2115 (commit snapshot 2025-01-05; no published release). Linked CAD makerspet/3d_models 42d7b7956bd6d54b8cff79f26c2f1d54f677ea18 listed only (archive over 150 MiB); shared firmware kaiaai/firmware e4d159c94321b1431e61f64f12c3a2da24cf2d19 (iron-branch commit snapshot). · software repository

Source files and licenses

Printable CAD, shared firmware and the ROS 2 description are public under Apache-2.0 root licenses; matched electronics source, a Snoopy-specific firmware configuration and a current budget remain unresolved.

LayerAvailability / license
mechanical designavailable · Apache-2.0
STL, 3MF and a Fusion 360 archive (Snoopy v126.f3z) are listed at the pinned commit. The repository archive exceeded the 150 MiB intake limit, so files were listed, not preserved or opened. Root Apache-2.0 as declared; purchased motors, LiDAR and battery are not covered. [10] [11]
electronicsnot found · License not fully assessed
README-linked makerspet/pcb now resolves to makerspet/store, whose pinned snapshot holds schematic PDFs, STEP models and one Gerber archive for other boards, without an editable KiCad project. The 2023 Snoopy page says a brushless ESP32 board was planned; its design source was not identified. [1] [9] [16] [17]
firmwareavailable · Apache-2.0 (root); bundled LGPL-3.0 and GPL-3.0 libraries
Shared platform firmware. Root Apache-2.0, but bundled AsyncTCP and ESPAsyncWebSrv carry LGPL-3.0 files and PID_Timed a GPL-3.0 file. Pinned board configurations name Mini-family boards and a makerspet_vac BLDC board, none for Snoopy. [12] [13] [14]
softwareavailable · Apache-2.0
ROS 2 description package (URDF, SDF meshes, Nav2/Cartographer configuration). Runtime packages live in separate Kaia.ai repositories whose licenses were not individually reviewed. [1] [3] [4] [15]
documentationavailable · Apache-2.0
Repository README under the root license. Maker's Pet blog pages and linked videos show no separate license in the inspected text; videos were not reviewed. [1] [3] [8] [9]

Selected mapping and navigation workflow uses no learned model weights.

No dataset is part of the selected workflow.

Licenses and unknowns

The description package and CAD repository carry Apache-2.0 license files. The shared firmware's root license is also Apache-2.0, but bundled AsyncTCP and ESPAsyncWebSrv carry LGPL-3.0 files and PID_Timed a GPL-3.0 file. Check those terms before redistributing binaries. No firmware was compiled, no parts were printed and no robot was built or tested for this profile. [3] [11] [13]

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

  • S001 Maker's Pet Snoopy README
    Robot description, features, linked CAD/firmware/PCB repositories, setup videos and support forum.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision d035f95 · README.md at · Accessed Oct 5, 2026


    Used for: Overview, Is this for you?, What you need, Hardware & parts and 4 more
  • S002 Repository revision and popularity metadata
    Selected default-branch commit snapshot (no published release), commit date, archive checksum and dated repository-level popularity.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision d035f95 · ; GitHub repository and commit API fields · Accessed Oct 5, 2026


    Used for: What we checked
  • S003 makerspet/makerspet_snoopy: LICENSE
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision d035f95 · Accessed Oct 5, 2026


    Used for: Source files and licenses
  • S004 ROS 2 package manifest
    Package name, description, maintainer and declared Apache 2.0 license.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision d035f95 · Accessed Oct 5, 2026


    Used for: What the Snoopy repository contains, Source files and licenses
  • S005 Robot URDF dimensions
    Simulation/description dimensions: base diameter, wheel diameter, wheel separation and tablet head geometry.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision d035f95 · urdf/robot.urdf.xacro, ROBOT DIMENSIONS block · Accessed Oct 5, 2026


    Used for: Hardware & parts, What the Snoopy repository contains
  • S006 Robot description modding and command guide
    kaiaai_bringup/kaiaai_gazebo launch commands for physical, simulated, mapping and navigation runs.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision d035f95 · Accessed Oct 5, 2026


    Used for: Is this for you?, What you need, Assembly & first use, What the Snoopy repository contains
  • S007 Telemetry configuration
    Default LiDAR model and scan mask radius for the description package.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision d035f95 · Accessed Oct 5, 2026


    Used for: Hardware & parts, What the Snoopy repository contains
  • S008 Maker's Pet bill-of-materials page
    Dated parts list and upstream parts total with bring-your-own exclusions.
    Revision, date & where cited

    Maker's Pet (Ilia O.) · makerspet.com · Blog page snapshot sha256 cdf0410ca142 · Accessed Oct 5, 2026


    Used for: Is this for you?, What you need, Hardware & parts, Assembly & first use and 2 more
  • S009 Maker's Pet robot design page
    Design notes, print-volume requirement, development status and repository contents as described by the maker.
    Revision, date & where cited

    Maker's Pet (Ilia O.) · makerspet.com · Blog page snapshot sha256 45dbfeb88ac1 · Accessed Oct 5, 2026


    Used for: Overview, Is this for you?, What you need, Hardware & parts and 4 more
  • S010 Linked CAD repository file listing (makerspet/3d_models)
    STL, 3MF and Fusion 360 file names and sizes for the model; no geometry inspected.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision 42d7b79 · Git tree API listing at ; repository archive over the 150 MiB intake limit, files listed but not preserved · Accessed Oct 5, 2026


    Used for: Is this for you?, Hardware & parts, What the Snoopy repository contains, Source files and licenses
  • S011 Linked CAD repository license
    Apache License 2.0 text for the CAD repository.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision 42d7b79 · LICENSE at the pinned CAD commit · Accessed Oct 5, 2026


    Used for: Source files and licenses
  • S012 Kaia.ai platform firmware README
    Shared ESP32 Arduino/micro-ROS firmware: supported motor drivers, BLDC motor guidance and change log.
    Revision, date & where cited

    Kaia.ai / Maker's Pet contributors · github.com · revision e4d159c · README.md at (iron branch snapshot) · Accessed Oct 5, 2026


    Used for: What you need, Assembly & first use, Firmware and electronics to reconcile, Source files and licenses
  • S013 Firmware and bundled library license files
    Root Apache-2.0 plus bundled libraries under Apache-2.0, LGPL-3.0 and GPL-3.0 license files.
    Revision, date & where cited

    Kaia.ai / Maker's Pet contributors · github.com · revision e4d159c · LICENSE and libraries/*/LICENSE headers · Accessed Oct 5, 2026


    Used for: Source files and licenses
  • S014 Firmware board configuration files
    Board configurations shipped with the pinned firmware snapshot.
    Revision, date & where cited

    Kaia.ai / Maker's Pet contributors · github.com · revision e4d159c · kaiaai-esp32/data/*.yaml board model lines · Accessed Oct 5, 2026


    Used for: Is this for you?, Assembly & first use, Firmware and electronics to reconcile, Source files and licenses
  • S015 Kaia.ai ROS 2 package README
    Platform architecture (ESP32 on robot, ROS 2 on PC), compatible robot list, supported LiDARs and installation routes.
    Revision, date & where cited

    Kaia.ai / Maker's Pet contributors · github.com · revision ef5fb2a · README.md at · Accessed Oct 5, 2026


    Used for: Overview, What you need, Assembly & first use, Firmware and electronics to reconcile and 1 more
  • S016 Maker's Pet store technical files inventory
    Schematic PDFs, STEP models, one Gerber archive and board configs; no editable KiCad project identified.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · revision e338516 · archive file inventory · Accessed Oct 5, 2026


    Used for: Firmware and electronics to reconcile, Source files and licenses
  • S017 Redirect of the README-linked PCB repository
    The README-linked makerspet/pcb repository resolves to makerspet/store.
    Revision, date & where cited

    Maker's Pet (makerspet.com) · github.com · GitHub API repos/makerspet/pcb response (redirected) · Accessed Oct 5, 2026


    Used for: Firmware and electronics to reconcile, Source files and licenses
  • S018 Upstream image and reuse attribution
    Media-only review: Upstream photograph of the MakersPet Snoopy robot enclosure and sensor configuration. Reuse basis: Apache-2.0; inspected LICENSE and the pinned file inventory for nearer notices. Original image unchanged; displayed responsively. This does not refresh technical or cost evidence.
    Revision, date & where cited

    MakersPet contributors · github.com · Image SHA-256 ce176577d8478d4a35aede6aa613f999fa5a1ed41343b29900b0c314638ce4f8; repository · Accessed Oct 25, 2026

Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5

Change history

2026-10-05 — Initial intake profile from pinned upstream sources (Growbotics lead verified against upstream).

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.