MEVITA
Robot / hardware buildTen-joint biped with purchased actuators, machined and welded metal parts, and a ROS 1 learning-to-control workflow; external hardware rights and build completeness need separate checks. [1]
Build & first use →Official websiteBill of materials
- For
- Researchers equipped for metal fabrication, CAN actuator integration and learned locomotion experiments [1]
- Cost
- No current cost yet. Upstream bill of materials [6]
- Source rights
- Some licenses are unresolved. Review licenses
- Unknowns
- host computer, tools, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware
- License
- MIT · license not fully assessed for mechanical design, model weights · Details by part
Overview
MEVITA combines a ten-joint biped with a ROS 1 control workflow and a project-specific reinforcement-learning branch. The repository configuration assigns five joints to each leg, while the linked parts list specifies six AK70-10 and four AK10-9 actuators. This is a fabrication and controls research starting point, not a build reproduced by this catalog. [1] [6] [8]
Is this for you?
- Known limitations
- External STEP assembly bytes and geometry not validated
- Complete current delivered build cost not established
- Root MIT license does not establish external hardware or inherited-code rights
- Motor firmware/protocol version mapping requires checking
Source-review boundaries; no hardware tests.
3D preview
MEVITA simulation assembly. The standard-foot simulation model at zero joint positions, not the long-foot variant. This is visualization geometry, not a manufacturing CAD package.
The 3D preview loads after the page.
Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.
Download original URDF source bundle (ZIP) · File checksums and provenance
Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.
Model sources
The preview uses the linked original design. Source grouping is retained where present; the caption identifies whether this is an assembly or one component.
Source, license and scale
Source: Kento Kawaharazuka / MEVITA contributors, revision c32976a31d150a333b9b1fbab456c0b8f5822cdc. Original and preview: MIT. Preview conversion by Open Source Robotics; source files unchanged inside the downloadable bundle. Preview coordinates are centered and rounded to six decimal places. URDF visual origins, mesh scales and joint transforms applied at zero joint positions, then metres converted to millimetres. No physical part tested.
Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.
What you need
- Dependencies
- ROS 1 / catkin
- PyTorch, SciPy, MuJoCo and mujoco-python-viewer
- Project-specific haraduka/legged_gym training branch
- Livox ROS driver branch; optional FAST_LIO
Hardware & parts
Assembly & first use
- Review mechanical and purchased-component configuration
- Match motor identities, CAN routing and calibration to the physical assembly
- Prepare the documented ROS 1 dependencies
- Review the project-specific training branch and policy export path
- Inspect the MuJoCo --sim route before any hardware commissioning
Editorial source-navigation sequence, not reproduced installation or safe-to-run hardware instructions.
Cost
No current, complete configuration-specific build cost has been established for this profile.
Hardware and cost evidence
The linked hardware folder lists an assembly STEP file, separate manufacturing and 3D-printing folders, a parts spreadsheet and software archives. The parts sheet names welded A5052/SUS304 structures, machined A7075 components, TPU soles, a Jetson Orin Nano, two CAN-USB interfaces and a Livox MID-360. The folder and readable documents were inspected; the raw assembly-file transfer failed, so geometry, fit and manufacturing completeness remain unchecked. [5] [6] [7]
The sheet's displayed sum is ¥1,727,737.8 / US$11,518.252 using its stated 150-yen conversion. Several printed parts and screws have no prices. These are source-sheet figures, not a current complete delivered quote; supplier prices, missing costs and configuration still need reconciliation. [6]
Project notes
Control and configuration boundaries
The README uses catkin and roscore, a Livox ROS driver branch, a haraduka/legged_gym training branch, policy export into models/policy.pt, and a MuJoCo --sim route. The pinned archive already contains a policy file, but its presence does not establish performance or reproducibility. Optional FAST_LIO and joystick dependencies add their own setup requirements. [1] [9]
There is also a concrete version check for builders: the README links AK10-9 V2.0 hardware, while parameters.py selects an AK10_9_V1p1 driver identifier. The names alone do not prove incompatibility, but the actual motor firmware and protocol parameter mapping must be verified before treating the configuration as matched. No motor commands, installations or locomotion tests were run here. [1] [8]
What is open and what remains unresolved
The repository has an MIT license. That does not independently settle the rights for externally hosted STEP files, weights or inherited helpers attributed to IsaacGym, LeggedGym and the T-Motor driver. The external hardware README provides links without an explicit hardware license in its inspected text. Motor “MIT mode” means the actuator's command mode, not a license grant. [1] [3] [5] [7]
MEVITA is therefore covered as a partial-source research project: useful control and model files are preserved, with hardware links and a detailed parts list, while full hardware rights, manufacturing validation and a current complete budget remain unresolved. [1] [5] [6] [9]
What we checked
Source research only; no installation, physical build or performance test performed. No affiliate links added.
Not yet established
- Requirements: operating system, host computer, tools
Updates
- Upstream last updated
- Aug 27, 2025 [2]
- Latest release
- Not established
- Profile updated
- Oct 25, 2026
- Sources last checked
- Sep 30, 2026
- Next review
- Oct 30, 2026
- Reviewed revision
- c32976a31d150a333b9b1fbab456c0b8f5822cdc (commit snapshot; no published stable release found) · combined hardware and software repository
Source files and licenses
Available project sources support research coverage; complete build and commercial qualification remain separate.
| Layer | Availability / license |
|---|---|
| mechanical design | available · License not fully assessed External STEP assembly and manufacturing folders are listed; explicit external hardware license and complete assembly validation not established. Raw STEP transfer to local workspace returned HTTP 403. [5] [7] |
| electronics | not found · License not fully assessed Purchased electronics BOM is supplied; no complete board-manufacturing source established. [6] |
| firmware | not found · License not fully assessed Vendor actuator configuration is required; open actuator firmware source not established. Motor MIT mode is a protocol mode, not a copyright license. [1] |
| software | available · MIT Root license applies as declared by repository; README attributes inherited helpers to IsaacGym, LeggedGym and a third-party T-Motor driver. Their full provenance and external training dependency terms remain separate. [1] [3] |
| model weights | available · License not fully assessed Pinned archive contains policy.pt; separate weight-specific rights, training provenance and reproduced performance not established. [1] [9] |
| documentation | available · MIT MIT identification is scoped to repository documentation; external Drive documents do not show a separate rights grant in the inspected text. [1] [3] [5] [6] |
Selected workflow trains locomotion in simulation; no separately distributed dataset is selected.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
Project sources
- S001 haraduka/mevita: README.md
Revision, date & where cited
github.com · revision
c32976a· Accessed Sep 30, 2026
Used for: Overview, Is this for you?, What you need, Hardware & parts and 4 more - S002 haraduka/mevita: commit c32976a
- S003 haraduka/mevita: LICENSE
Revision, date & where cited
github.com · revision
c32976a· Accessed Sep 30, 2026
Used for: Is this for you?, What is open and what remains unresolved, Source files and licenses - S004 haraduka/mevita: files
Revision, date & where cited
github.com · revision
c32976a· archive file inventory · Accessed Sep 30, 2026 - S005 MEVITA linked hardware readme
Revision, date & where cited
haraduka / project contributors · docs.google.com · Drive readable-text snapshot; modified 2025-05-16T01:28:25.021Z · Accessed Sep 30, 2026
Used for: Is this for you?, Assembly & first use, Cost, What is open and what remains unresolved and 1 more - S006 MEVITA linked hardware parts
Revision, date & where cited
haraduka / project contributors · docs.google.com · Drive readable-text snapshot; modified 2026-06-12T11:10:29.727Z · Accessed Sep 30, 2026
Used for: Overview, Is this for you?, Hardware & parts, Cost and 2 more - S007 Linked hardware folder inventory
Revision, date & where cited
haraduka / project contributors · drive.google.com · Direct-child metadata; raw STEP preservation failed with HTTP 403; no geometry validation · Accessed Sep 30, 2026
Used for: Is this for you?, Assembly & first use, Cost, What is open and what remains unresolved and 1 more - S008 Pinned robot joint configuration
Revision, date & where cited
github.com · revision
c32976a· Accessed Sep 30, 2026
Used for: Overview, Is this for you?, Hardware & parts, Assembly & first use and 1 more - S009 Complete pinned repository filenames
Revision, date & where cited
github.com · revision
c32976a· Complete archive filename inventory; not a completeness test · Accessed Sep 30, 2026
Used for: Control and configuration boundaries, What is open and what remains unresolved, Source files and licenses - S011 Upstream image and reuse attribution
Media-only review: Upstream illustration of MEVITA hardware and leg components, not a photograph of a tested build. Reuse basis: MIT; inspected LICENSE and the pinned file inventory for nearer notices. Original image unchanged; displayed responsively. This does not refresh technical or cost evidence.Revision, date & where cited
Kento Kawaharazuka and MEVITA contributors · github.com · revision
c32976a· Image SHA-256 96b66e2e2720a87fc28e0a5453dad93e2d56913fc84532dbf2b7d1d143c28fd9; repository · Accessed Oct 25, 2026
Videos
- S010 MEVITA: Open-Source Bipeda Robot Assembled from E-Commerce Components (Humanoids 2025) (YouTube video)
Video uploaded by JSK / EVARL / Kento Kawaharazuka, linked from the project’s own documentation. Not reviewed by us for accuracy.Revision, date & where cited
YouTube video JSK / EVARL / Kento Kawaharazuka · youtube.com · Accessed Oct 4, 2026
Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1
Change history
2026-10-04 — Added 1 YouTube reference(s) (S010): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.
2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.