mjbots quad
Robot / hardware buildQuadruped source collection with distinct A1 and A2 configurations, printable structural parts, C++ control and browser-based simulation; this review centers on the documented A1 operating configuration. [1]
Build & first use →Official website
- For
- Experienced robotics developers able to reconcile hardware revisions and commission powerful actuators [1]
- Cost
- No current cost or bill of materials established yet.
- Source rights
- Named licenses are documented by part. Review licenses
- Unknowns
- host computer, tools not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details
Licenses & related hardware
- License
- Apache-2.0 · Details by part
Overview
The mjbots quad repository contains structural designs, C++ control, simulation and configurations for several quadrupeds. This profile uses the documented A1 operation and maintenance path. Its configuration enumerates twelve joints across four legs; the separate A2 file changes geometry and other parameters, so the two should not be treated as interchangeable build specifications. [1] [5] [6] [7]
Is this for you?
- Known limitations
- A1 and A2 geometry/configurations differ and must not be interchanged without reconciliation
- Complete matched BOM, manufacturing sequence and delivered cost remain unverified
- External Fusion assembly and dependency artifacts are not all preserved in the main archive
- No installation, simulation or hardware tests performed
Review boundaries, not a statement that missing evidence does not exist upstream.
What you need
- Operating system
- Host setup documented for Ubuntu 20.04/22.04; README adds a manual libtinfo5 compatibility step for Ubuntu 24.04.
Hardware & parts
- Hardware configuration
Quadruped; selected A1 configuration has four legs and three controlled joints per leg.
- Actuators
- Three servos per A1 leg; maintenance instructions identify a lower-leg qdd100
Complete actuator BOM and current hardware substitutions not verified.
- Power
A1 operating instructions specify a 4 Ah ONE+ battery.
Historical documented configuration; no battery-system testing.
- Degrees of freedom
12
Twelve joint IDs in A1 configuration, not a measurement of another revision.
Assembly & first use
- Assembly
Printable chassis and leg artifacts are supplied alongside an external overall Fusion assembly link; the selected A1 guide covers operation and maintenance, not a complete manufacturing sequence.
- Calibration
A1 leg re-zeroing uses fixtures after disassembly or belt skipping; belt tension must also be maintained.
Cost
No current, complete configuration-specific build cost has been established for this profile.
3D preview
Preview not available yet. Mesh files were identified. Their source inventory does not by itself establish assembly hierarchy or component placement.
Model sources
Mesh files were identified. Their source inventory does not by itself establish assembly hierarchy or component placement.
Project notes
Supplied structures and remaining build work
The archive has dated chassis and leg 3MF files, plus distinct chassis_a2 and leg_a2 directories. The README also links an overall Fusion assembly. File availability does not establish a complete matched manufacturing package: this review has not validated geometry, opened the external assembly or reconciled a full purchased-parts BOM. Current delivered build cost remains unknown. [1] [9]
The A1 guide begins with an assembled robot and a 4 Ah ONE+ battery. It explains browser/gamepad operation, belt tension and leg re-zeroing with fixtures. Its maintenance instructions identify a lower-leg qdd100 and three servos per leg. These are useful configuration details, but the operating guide is not a complete fabrication manual. [5]
Host tools and physical calibration are different checks
The README documents Ubuntu 20.04/22.04 host setup and a libtinfo5 compatibility step for Ubuntu 24.04. The workspace selects Bazel 7.4.1 and brings in external repositories including rpi_bazel, mjlib and moteus. A browser-based simulator is documented, but neither the build nor simulation was executed in this review. [1] [8]
For physical A1 operation, the guide says startup-position detection catches only some invalid positions. It also requires re-zeroing after leg reassembly or belt skipping. These constraints matter when evaluating a used or modified robot; a successful host build would not establish calibration or safe physical operation. No actuator commands or locomotion tests were run here. [5]
Source scope
The root license is Apache 2.0 and the README says most hardware and software files use that license. This does not replace individual notices or license checks for external dependencies and the separately linked assembly. The main archive's printable structural files and control source are established; a complete matched electronics, servo-firmware and manufacturing set is not established by this review. [1] [3] [8] [9]
The entry therefore supports source exploration and A1 configuration research while keeping A2 files, external components and unreproduced build claims distinct. [5] [6] [7]
What we checked
Source research only; no installation, physical build or performance test performed. No affiliate links added.
Not yet established
- Requirements: host computer, tools
- A step-by-step setup summary
Updates
- Upstream last updated
- Jun 17, 2026 [2]
- Latest release
- Not established
- Profile updated
- Oct 4, 2026
- Sources last checked
- Oct 1, 2026
- Next review
- Oct 31, 2026
- Reviewed revision
- 8ce3bc4ae14e033fea38d88b6a1f46c349e871d6 (commit snapshot; no published stable release found) · combined hardware and software repository
Source files and licenses
Available project sources support research coverage; complete build and commercial qualification remain separate.
| Layer | Availability / license |
|---|---|
| mechanical design | available · Apache-2.0 README describes most files as Apache 2.0; independent dependencies and externally linked assembly require their own scope checks. [1] [3] [9] |
| electronics | not found · License not fully assessed Complete selected electronics manufacturing/servo firmware package not established in this main archive; moteus is an external dependency and must be reviewed separately. [8] [9] |
| firmware | not found · License not fully assessed Complete selected electronics manufacturing/servo firmware package not established in this main archive; moteus is an external dependency and must be reviewed separately. [8] [9] |
| software | available · Apache-2.0 README describes most files as Apache 2.0; independent dependencies and externally linked assembly require their own scope checks. [1] [3] [9] |
| documentation | available · Apache-2.0 README describes most files as Apache 2.0; independent dependencies and externally linked assembly require their own scope checks. [1] [3] [9] |
Selected control/simulation workflow is not based on distributed trained weights or datasets.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
Project sources
- S001 mjbots/quad: README.md
Revision, date & where cited
github.com · revision
8ce3bc4· Accessed Oct 1, 2026
Used for: Overview, Is this for you?, What you need, Assembly & first use and 4 more - S002 mjbots/quad: commit 8ce3bc4
- S003 mjbots/quad: LICENSE
Revision, date & where cited
github.com · revision
8ce3bc4· Accessed Oct 1, 2026
Used for: Source scope, Source files and licenses - S004 mjbots/quad: files
Revision, date & where cited
github.com · revision
8ce3bc4· archive file inventory · Accessed Oct 1, 2026 - S005 Pinned docs/quada1/README.md
Revision, date & where cited
github.com · revision
8ce3bc4· Accessed Oct 1, 2026
Used for: Overview, Is this for you?, Hardware & parts, Assembly & first use and 3 more - S006 Pinned configs/quada1.cfg
Revision, date & where cited
github.com · revision
8ce3bc4· Accessed Oct 1, 2026
Used for: Overview, Is this for you?, Hardware & parts, Source scope - S007 Pinned configs/quada2.cfg
Revision, date & where cited
github.com · revision
8ce3bc4· Accessed Oct 1, 2026
Used for: Overview, Is this for you?, Source scope - S008 Pinned WORKSPACE
Revision, date & where cited
github.com · revision
8ce3bc4· Accessed Oct 1, 2026
Used for: Is this for you?, What you need, Host tools and physical calibration are different checks, Source scope and 1 more - S009 Complete pinned filenames
Revision, date & where cited
github.com · revision
8ce3bc4· Complete archive inventory; not manufacturing validation · Accessed Oct 1, 2026
Used for: Assembly & first use, Supplied structures and remaining build work, Source scope, Source files and licenses
Videos
- S010 Josh Pieper (YouTube channel)
The project’s own YouTube channel, found by searching YouTube and checked against the channel page. Not reviewed by us for accuracy.Revision, date & where cited
YouTube channel Josh Pieper · youtube.com · Accessed Oct 4, 2026
Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1
Change history
2026-10-04 — Added 1 YouTube reference(s) (S010): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.