Open Source RoboticsRobots, software & learning

MuSHR

Robot / hardware build

RC-based research racecar; the reviewed Nano route uses V3 printed parts and separately versioned ROS control packages, with older firmware/image assumptions requiring validation. [1]

Build & first use →Official websiteBill of materials

For
Research and teaching labs comfortable with RC assembly and Linux/ROS configuration [1]
Cost
No current cost yet. Upstream bill of materials [7]
Source rights
Some licenses are unresolved. Review licenses
Unknowns
tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of several MuSHR car configurations; these are separate builds.
Upstream photograph of several MuSHR car configurations; these are separate builds. Mark Stone / University of Washington; MuSHR contributors · BSD-3-Clause. Original image unchanged; displayed responsively.
Licenses & related hardware
License
BSD-3-Clause · license not fully assessed for electronics · Details by part

Requirements · Research details and dates

On this page

Overview

MuSHR is an RC-based research racecar platform with several hardware and software components. This entry follows the Nano build guide: a Redcat Blackout chassis, Jetson Nano, VESC and printed upper frame. The guide replaces the stock drive motor and steering servo; it also offers a Pro chassis with a brushless motor already fitted. Those alternatives affect the assembly work and parts list. [5] [7]

Is this for you?

Known limitations
  • CAD and control sources have separate revisions
  • Historical Nano image and VESC hardware-specific firmware need compatibility checking
  • Safety command input exists but base README describes its controller as currently null

[5] [11] [14] [15]

3D preview

MuSHR Nano simulation assembly. The upstream Nano simulation chassis, four wheels, lidar and simplified camera at their source reference poses. Wheel collision proxies and the floor are excluded. Source body grouping is retained; the chassis mesh combines several components. This is a simplified simulation model, not manufacturing CAD or a verified physical build.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original MJCF source bundle (ZIP) · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: MuSHR / University of Washington Personal Robotics Lab contributors, revision c86eef33dadb0e98fe916a55ac6aa1fc03af027e. Original and preview: BSD-3-Clause. Preview conversion by Open Source Robotics; source files unchanged inside the downloadable bundle. Preview coordinates are centered and rounded to six decimal places. Source visual shapes and body transforms evaluated at the reference pose by MuJoCo, then metres converted to millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

What you need

Host computer

Jetson Nano plus host computer or monitor/keyboard/mouse for setup.

[5]

Dependencies
  • Separately versioned mushr_base, VESC and sensor packages
  • Main repos.yaml points to moving master/development branches
  • Nano system image or stock-image setup route

[5] [11] [14]

Hardware & parts

Upstream bill of materials [7]

Hardware configuration

Selected Nano configuration: Redcat Blackout RC-based car with V3 printed upper frame.

[5] [7] [8]

Actuators
  • Replacement brushless drive motor and steering servo; Pro chassis offers preinstalled brushless motor alternative

[5] [7]

Controller

Jetson Nano, VESC motor controller and steering servo.

[5] [7]

Sensors
  • YDLIDAR option
  • RealSense camera alternatives; match the chosen sensor configuration and mounts

[7]

Assembly & first use

Project documentation [1]

Assembly

Modify purchased RC chassis and print Nano V3 frame parts; TX2 V2 files are a separate design.

[5] [8]

Calibration

Configure VESC for actual motor and servo; guide begins software setup with wheels clear of the ground.

[5]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Use the Nano-specific printed parts

The separately preserved CAD repository identifies V3 as the Nano design and V2 as the TX2 design. Its README directs Nano builders to print the files in v3/stl once each, except racecar_cover_image, which is printed twice. OpenSCAD source is provided for modifying the parts. The archive was preserved, but no print, geometric fit or chassis assembly was tested here. [8] [10]

The parts document lists purchased electronics, fasteners, power components and sensor alternatives. It lists RealSense alternatives and notes that fitting missing motor bullet connectors may require soldering. The build guide also describes a D435i/T265 dual-camera arrangement. As an editorial next step, select the camera configuration and reconcile its mounts and wiring with the chosen guide before ordering. [5] Consequently, the project overview’s general no-soldering description depends on the parts actually purchased. Historical item prices are not a current complete delivered budget. [1] [7]

Preserve the software environment separately

The main repository is an index and integration layer. Its dependency manifest points to moving branches for the base controller, VESC and camera packages. This review separately preserved the base-control repository and CAD, but that does not establish a fully pinned, installed system across every dependency. [1] [11] [13] [14]

The build guide offers a preconfigured Nano image and a stock-image installation route for image problems or smaller storage. It also instructs builders to select the older bldc-tool/firmwares/hw_410_411_412/VESC_servoout.bin binary for that hardware family. Record and verify the selected board, firmware and image combination; these instructions do not establish compatibility with arbitrary newer Jetson or VESC hardware. Neither image installation nor firmware flashing was performed here. [5]

Distinguish command priority from an implemented safety controller

The base configuration gives the safety input higher priority than teleoperation, followed by navigation and a default input. However, the base README describes the safety controller input as currently null. A named high-priority channel does not demonstrate that an active safety controller is installed or publishing commands. [11] [15]

Upstream begins software setup with the car supported so its wheels are clear of the ground, then configures the VESC and controller before teleoperation. Confirm the actual motor/servo behavior and joystick mapping before moving on to navigation experiments. This review does not claim a tested stop behavior, navigation result or calibrated vehicle. [5] [11]

The main and CAD repositories carry BSD-3-Clause license text. The separate base repository also contains that license text, with its own copyright line and bundled component notices. These do not establish blanket rights to website content, all external drivers or purchased RC components. Source availability and a successfully reproduced build remain separate findings. [3] [9] [12]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: operating system, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Feb 10, 2022 [2]
Latest release
Not established
Profile updated
Oct 25, 2026
Sources last checked
Oct 1, 2026
Next review
Oct 31, 2026
Reviewed revision
2030b907822ac333d00cc9674625198dde1886ed (commit snapshot; no published stable release found) · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · BSD-3-Clause
V3 printed additions and design files; not complete manufacturer source for purchased chassis. [8] [9] [10]
electronicsavailable · License not fully assessed
Integration and wiring instructions; website reuse license and complete purchased-board source not established. [5]
firmwarenot found · License not fully assessed
Guide selects a historical VESC servo-output binary; complete matching firmware source for the selected controller not preserved here. [5] [14]
softwareavailable · BSD-3-Clause
Main repository scope; website, separate packages and purchased components require separate terms. [3] [4]
documentationavailable · BSD-3-Clause
Main repository scope; website, separate packages and purchased components require separate terms. [3] [4]

No learned model or dataset selected for this physical platform and teleoperation profile.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.