Open Source RoboticsRobots, software & learning

NanoSaur

Robot / hardware build

Small tracked Jetson robot; this profile covers the preserved 1.5.1 source, whose container recipe targets ROS 2 Foxy and whose STL files carry noncommercial terms. [1] [2] [5] [6]

Build & first use →Official website

For
Builders evaluating a legacy Jetson configuration and its missing reproduction details [1]
Cost
No current cost or bill of materials established yet.
Source rights
Named licenses are documented by part. Includes noncommercial terms. Review licenses
Unknowns
tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware
License
CC-BY-NC-SA-4.0 (noncommercial), MIT · Details by part

Requirements · Research details and dates

On this page

Overview

nanosaur is a small tracked robot for NVIDIA Jetson. This profile selects the preserved 1.5.1 source archive, including its robot description, control launch files and container recipes. The robot description references a Jetson Nano 4 GB mesh, but that reference alone is not a complete specification for a reproducible build. [1] [2] [9]

Is this for you?

Known limitations
  • Complete matched BOM and electronics design not established in the reviewed snapshot
  • Repository import entries use moving branches or omit revisions
  • Compose defaults include mutable image tags and daily update checks
  • STL license restricts commercial use

[4] [5] [7] [8]

3D preview

NanoSaur 1.5.1 robot description. The NanoSaur 1.5.1 robot description (nanosaur_description/urdf/nanosaur.urdf.xml with its track, head and flap xacro macros, expanded without changes) at zero joint positions: 23 visual meshes on the source link tree. They are the printed base, cover, flap, power-bank holder, tracks, sliders, sprockets and wheels, plus the component models shipped in meshes/parts/: an NVIDIA Jetson Nano, two Pololu micro metal gearmotors, two OLED modules, a Raspberry Pi camera, a power bank, the motor board and the expansion board. These component models are kept as the source description places them. The README puts every STL file in nanosaur_description/meshes under CC BY-NC-SA 4.0, but the original third-party terms of the purchased components they depict are unknown. Source material colors are applied. Noncommercial; no commercial-use or manufacturing clearance is claimed. Fit and operation are not verified.

Noncommercial license: the NanoSaur README states that all STL files in nanosaur_description/meshes are under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, and the repository code, including the URDF/xacro, is MIT. That includes the meshes/parts/ models of purchased components (Jetson Nano, gearmotors, OLED modules, camera, power bank and boards), whose original third-party CAD terms are unknown. The preview and hosted original remain under these terms with attribution to Raffaello Bonghi; no commercial-use or manufacturing clearance is claimed. License: CC BY-NC-SA 4.0 · upstream notice.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original URDF source bundle (ZIP) · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: Raffaello Bonghi, revision 2d953e37a33a9d413ae11138879589ad7002bd93. Original and preview: STL meshes: CC-BY-NC-SA-4.0; URDF/xacro code: MIT. Preview conversion by Open Source Robotics; source files unchanged inside the downloadable bundle. Preview coordinates are centered and rounded to six decimal places. URDF visual origins, mesh scales and joint transforms applied at zero joint positions, then metres converted to millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

What you need

Host computer

Jetson target for the preserved Foxy/L4T container recipe; full hardware/software pairing remains to be reconciled.

[6]

Dependencies
  • ROS 2 Foxy base container tagged l4t-r32.6.1
  • Separate nanosaur_robot repository
  • ros2_jetson_stats and ros2_system_manager
  • External web interface and Watchtower container images

[6] [7] [8]

Hardware & parts

Hardware configuration

Small tracked robot with left and right tracks and printed structural parts.

[1] [9]

Controller

NVIDIA Jetson Nano; the preserved robot description references a Nano 4 GB mesh.

A referenced board model does not by itself establish a complete compatible physical configuration.

[1] [9]

Assembly & first use

Project documentation [1]

Assembly

Printable STL files are preserved; the website links to separate parts, printing, assembly and hardware setup instructions.

Linked build instructions and a matched complete BOM were not preserved in this review.

[4] [11]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

What the archive contains

The repository includes STL parts for the tracks, body and other assemblies, a URDF/Xacro robot description and ROS 2 packages. It also contains meshes representing purchased boards and other components. Those component meshes are not fabrication-ready source for the electronics they represent. A complete native mechanical design, matched electronics source and configuration-specific bill of materials were not established by this review. [4] [9]

The project's quick-start page separates the physical build from simulation and points readers to parts, printing, assembly, hardware setup and installation guides. This review preserved that landing page, not all of its linked build artifacts. A prospective builder still needs to reconcile those instructions with the selected repository release before sourcing parts. No current complete build cost is claimed. [11]

The preserved recipe uses Foxy and JetPack 4.6-era components

The Dockerfile identifies JetPack 4.6 and starts from a ROS 2 Foxy container tagged for L4T r32.6.1. Its build imports this repository from a Foxy branch and obtains separate robot and system-management packages. Several import entries either name moving branches or omit a revision. A saved copy of the main repository therefore does not freeze all of the code used by that build recipe. [6] [7]

The Compose file adds a second source of drift: the core image defaults to a latest tag, the web interface uses a main tag, and a Watchtower service checks for updates daily. For a repeatable experiment, record the actual image digests and dependency revisions used, together with the Jetson board and system image. That is an editorial preservation recommendation; no container was built, pulled or run here. [8]

Check the launch configuration before treating it as a ready setup

The teleoperation launch file uses joy and teleop_twist_joy. In the preserved file, config_filepath is declared twice while joy_config is referenced without a corresponding declaration in that file. That source-level inconsistency needs review when assembling a working launch route. It does not establish the behavior of every external caller or container image. This review did not execute the launch file. [10]

Code and printed parts have different terms

The root license and overview state MIT for code, while inspected Docker and launch files contain BSD three-clause notices. Preserve those individual notices rather than assuming the root label replaces them. External Jetson software, imported repositories and container images retain their own terms. [1] [3] [6] [8] [10]

The STL directory has an explicit CC BY-NC-SA 4.0 license. Its noncommercial restriction means these printable files are not presented here as unrestricted open hardware. Availability of a printable part also does not establish dimensional accuracy or assembly success. The profile remains partial: no printing, wiring, installation, driving or autonomous behavior was tested. [5]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: operating system, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Oct 30, 2021 [2]
Latest release
Oct 30, 2021 [2]
Profile updated
Oct 4, 2026
Sources last checked
Oct 1, 2026
Next review
Oct 31, 2026
Reviewed revision
2d953e37a33a9d413ae11138879589ad7002bd93 (release 1.5.1) · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · CC-BY-NC-SA-4.0
STL files under explicit noncommercial terms; not unrestricted open hardware. Complete native editable design source not established. [1] [4] [5]
electronicsnot found · License not fully assessed
Board meshes are present, but complete fabrication-ready electronics designs and a matched wiring set were not established in this primary archive. [4] [9]
firmwarenot found · License not fully assessed
External Jetson environment and robot repositories referenced; complete matching firmware sources and payloads not preserved here. [4] [6] [7]
softwareavailable · MIT
Root and README state MIT; inspected Docker and launch files carry BSD-3-Clause notices. Preserve per-file terms; external dependencies are separate. [1] [3] [6] [8] [10]
documentationavailable · MIT
Repository documentation under root terms; external website and wiki terms not established here. [1] [3]

This profile selects the robot description and basic control/container source, not a learned perception or navigation model.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

Videos

  • S012 Raffaello Bonghi (YouTube channel)
    The project’s own YouTube channel, linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube channel Raffaello Bonghi · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-10-04 — Added 1 YouTube reference(s) (S012): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.