Open Source RoboticsRobots, software & learning

NICO

Robot / hardware build

A humanoid interaction research platform with distinct FDM and SLS-oriented mechanical designs and a separate software repository. [1]

Build & first use →Official websiteUpstream build guide

For
Human–robot interaction laboratories; Builders with fabrication and integration experience [1]
Cost
No current cost or bill of materials established yet.
Source rights
Named licenses are documented by part. Review licenses
Unknowns
host computer, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream paper photograph of NICO sitting on child-sized furniture (Figure 2A, 2020).
Upstream paper photograph of NICO sitting on child-sized furniture (Figure 2A, 2020). Matthias Kerzel, Theresa Pekarek-Rosin, Erik Strahl, Stefan Heinrich and Stefan Wermter · CC-BY-4.0. Cropped to isolate the NICO photograph in panel A from the source image; no retouching. Full original retained. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware

Requirements · Research details and dates

On this page

Overview

NICO is a humanoid platform for multimodal interaction research. Its CAD archive includes a regular design and a separate collection optimized by Seed Robotics for SLS or similar printing processes. The optimized README explicitly directs FDM builders to the regular models. The two sets should therefore be treated as manufacturing choices rather than interchangeable print files. [1] [5]

Is this for you?

Known limitations
  • SLS-optimized models should not be assumed interchangeable with the regular FDM files
  • Printable structures do not include a complete purchased-component manufacturing pack
  • Software and CAD are separately versioned; compatibility not reproduced

[1] [5] [6]

3D preview

NICO source simulation assembly. The complete.urdf simulation configuration with its supplied visual meshes, at zero joint positions. This is not verification of the current physical robot or a complete fabrication package.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original URDF source bundle (ZIP, LZMA compression) · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: Knowledge Technology, University of Hamburg / NICO contributors, revision 7098cceb2be6617d6d999bfc56d2d989119931d5. Original and preview: CC-BY-SA-4.0 / GPL-3.0-or-later. Preview conversion by Open Source Robotics; source files unchanged inside the downloadable bundle. Preview coordinates are centered and rounded to six decimal places. URDF visual origins, mesh scales and joint transforms applied at zero joint positions, then metres converted to millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

What you need

Tools
  • SLS/Multijet service or machine for the optimized variant
  • Laser-cutting service for the optimized aluminum parts
  • Appropriate fastener and assembly tools

[1] [5] [6]

Hardware & parts

Hardware configuration

Humanoid interaction platform

[1] [5] [6]

Assembly & first use

Open the upstream getting-started guide [1] [5] [6] · Project documentation [1] [5] [6]

Assembly

Choose regular FDM or SLS-oriented models. The SLS route additionally specifies five laser-cut parts from two designs.

[1] [5] [6]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

The SLS route includes laser-cut parts

The optimized design requires an SLS or Multijet service or machine and five laser-cut pieces from two designs. Its instructions call for four shoulder reinforcements and an upper plate, preferably in 2 mm aluminum. They also distinguish printable STL parts from auxiliary CAD and an upper-plate model intended only for visualization. This matters when preparing a fabrication order: exporting every CAD object as a print would not follow the documented build. [5]

The same notes identify separate camera, LED-matrix and cable-management supports, plus a bracket for Seed Robotics RH4D hands. These are interfaces to a larger component set, not proof that the CAD download includes every actuator, hand, sensor and board. A complete configuration-specific BOM, delivered cost and compatible electronics set remain to be reconciled. [5]

Keep software and attribution with their own artifacts

We preserved the CAD and NICO-software repositories at separate immutable commits. The software overview points to its wiki for simulation and to separate build documentation; no installation or matching physical setup was reproduced here. [1] [2] [6]

Licenses also differ by source. The SLS contribution and ear attribution declare CC BY-SA 3.0, while the root CAD overview credits an iCub-derived head. The software repository assigns GPL v3-or-later to code and CC BY-SA 4.0 to other files. Those software terms should not be extended automatically to every CAD component. A future build or support offer needs the per-part provenance and chosen manufacturing route resolved alongside calibration and maintenance work. [1] [5] [6]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: operating system, host computer
  • A step-by-step setup summary

Updates

Upstream last updated
Mar 19, 2020 [2]
Latest release
Not established
Profile updated
Oct 26, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
CAD 161109bf2f9c58d9f3f2f8fe8232f2299ef79354 and software 7098cceb2be6617d6d999bfc56d2d989119931d5 (separate commit snapshots, no stable GitHub releases selected). · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · Component-scoped CC-BY-SA-3.0 declarations
SLS contributor README and ear attribution declare CC-BY-SA-3.0; full CAD provenance, including iCub-derived head and purchased components, still needs per-part reconciliation. [1] [5]
electronicsnot found · License not fully assessed
Complete matched manufacturing/firmware sources for purchased components not established in CAD and overview review. [4] [5] [6]
firmwarenot found · License not fully assessed
Complete matched manufacturing/firmware sources for purchased components not established in CAD and overview review. [4] [5] [6]
softwareavailable · GPL-3.0-or-later
Software repository explicitly distinguishes code from other files. [6]
documentationavailable · CC-BY-SA-4.0
Non-code files in the software repository only; not a blanket CAD or external wiki license. [6]

This platform review selects no particular learned policy or dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

Videos

  • S007 Knowledge Technology, University of Hamburg (YouTube channel)
    The project’s own YouTube channel, linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube channel Knowledge Technology, University of Hamburg · youtube.com · Accessed Oct 4, 2026

  • S008 Express The Skills (YouTube video)
    Video from the project’s own channel (Knowledge Technology, University of Hamburg), linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video Knowledge Technology, University of Hamburg · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.5.0-draft.1

Change history

2026-10-04 — Added 2 YouTube reference(s) (S007, S008): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.