Open Source RoboticsRobots, software & learning

Open-Gripper-mini

End effector

Compact rack-driven gripper with an assembly STEP and upstream build photo; exact actuator, BOM and control integration still need to be specified. [1] [3] [4]

Build & first use →Official websiteUpstream build guide

For
Builders able to inspect CAD, source parts and reconcile control integration. [1]
Cost
No current cost or bill of materials established yet.
Source rights
Named licenses are documented by part. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of an Open-Gripper-mini build with yellow jaws. This is the maintainer’s build, not hardware tested by us.
Upstream photograph of an Open-Gripper-mini build with yellow jaws. This is the maintainer’s build, not hardware tested by us. N-B-Studio · Apache-2.0. Reproduced unchanged; displayed responsively. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware

Research details and dates

On this page

Overview

Open-Gripper-mini is a compact rack-driven gripper design for builders who can finish the mechanical and control integration themselves. The preserved source supplies an assembly STEP and a photograph of a physical build, but not a matched purchasing and commissioning package. Treat it as a design starting point, not a ready-to-reproduce kit. [1] [3] [4]

Is this for you?

Known limitations
  • Exact actuator, motor supply, full gripper BOM and mounting pattern are not established.
  • Named gripper CAD directory has an assembly STEP but no ready-to-print STL set.
  • No matched gripper firmware or complete current cost verified.

Editorial synthesis of inspected sources; not physical qualification.

[1] [3] · Editorial assessment

3D preview

Open-Gripper-mini assembly. Assembly geometry from the upstream STEP; includes represented motor and mounting hardware. Exact actuator, bill of materials and host-arm fit remain unverified.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original STEP · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: N-B-Studio, revision 794cd3a623d686796c85b360036860fa97d3fb0d. Original and preview: Apache-2.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

Hardware & parts

Hardware configuration

Compact rack-driven parallel gripper

Editorial synthesis of inspected sources; not physical qualification.

[3] [4] · Editorial assessment

Actuators
  • README suggests a small servo or stepper; exact build actuator not specified.

[1]

Assembly & first use

Open the upstream getting-started guide [1]

Assembly

README suggests 20% infill and M2/M3 fasteners; complete BOM and assembly sequence not found.

Editorial synthesis of inspected sources; not physical qualification.

[1] [3] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

What is actually in the download

The README says that STEP, SLDPRT and ready-to-print STL files are provided. In the named 3D file directory, however, this snapshot contains only 3d-model.step and a short text file. Other CAD files in the archive belong to vendor motor/controller references. Do not count those as a missing gripper print set: isolate the required gripper bodies from the assembly and establish their print exports before fabrication. [1] [3]

The README suggests 20% infill and M2/M3 fasteners, but it does not give a complete gripper BOM, exact actuator designation, material-specific print settings or a dimensioned host-arm interface. The build photograph shows one implementation, not a source-backed substitute for those missing specifications. Confirm the motor envelope, rack travel, bearings, fastener lengths and mounting pattern in CAD before ordering parts. No current complete build cost is established. [1] [3] [4]

Keep vendor examples separate from a control solution

The README explicitly describes the STM32-H723 examples as unrelated to the gripper mechanics. The archive also contains vendor motor documentation, examples and controller CAD under Document/. Their presence does not establish a validated motor, power supply or matched controller for this gripper. A build still needs a chosen actuator, driver, wiring, travel limits and control interface; no compilation or powered setup was performed for this profile. [1] [3]

The root Apache-2.0 license supports reuse of the first-party design and supplied project image with its notice. It does not establish manufacturing rights for purchased components or relicense all bundled third-party vendor material. The photograph is credited to the upstream project; the interactive preview shows the separate assembly geometry. Neither is a test of grip force, payload or cobot/delta compatibility. [2] [3] [4]

What we checked

Source and geometry review only. No procurement, assembly, firmware build, calibration or physical performance testing.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 4, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
794cd3a

Source files and licenses

Licensed first-party mechanical design and documentation; purchased components and a matched working build remain separate checks.

LayerAvailability / license
mechanical designavailable · Apache-2.0
First-party project files under root license; vendor artifacts and purchased-component manufacturing not included in this grant assessment. [2] [3]
electronicsnot found · License not fully assessed
A revision-matched gripper solution was not established; unrelated STM32 examples and vendor references are not treated as that solution. [1] [3]
firmwarenot found · License not fully assessed
A revision-matched gripper solution was not established; unrelated STM32 examples and vendor references are not treated as that solution. [1] [3]
softwarenot found · License not fully assessed
A revision-matched gripper solution was not established; unrelated STM32 examples and vendor references are not treated as that solution. [1] [3]
documentationavailable · Apache-2.0
First-party project files under root license; vendor artifacts and purchased-component manufacturing not included in this grant assessment. [2] [3]

No learned model or dataset required by the documented mechanical design.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

Videos

  • S005 Open-Source 3D Printed FOC Gripper with Force Feedback (YouTube video)
    Video from the project’s own channel (N.B.Studio), linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video N.B.Studio · youtube.com · Accessed Oct 4, 2026

  • S006 N.B.Studio (YouTube channel)
    The project’s own YouTube channel, found by searching YouTube and checked against the channel page. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube channel N.B.Studio · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-10-04 — Added 2 YouTube reference(s) (S005, S006): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.