Open Source RoboticsRobots, software & learning

OpenROV

Robot / hardware build

Historical DIY underwater exploration platform; this entry selects the OpenROV 2.8 mechanical files and the corresponding named controller-board package for source research. [1]

Build & first use →Official website

For
Researchers and experienced builders able to reconcile historical component and software revisions [1]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Includes noncommercial terms. Review licenses
Unknowns
tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Paper photograph of the OpenROV 2.8 from the front, showing its camera, electronics tube and two battery tubes.
Paper photograph of the OpenROV 2.8 from the front, showing its camera, electronics tube and two battery tubes. M-Mahdi Naddaf-Sh, Harley Myler and Hassan Zargarzadeh · CC-BY-4.0. Embedded image extracted from page 4 of the source PDF and losslessly decoded to PNG; no retouching. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
License
CC-BY-NC-SA-4.0 (noncommercial) · license not fully assessed for electronics · Details by part

Requirements · Research details and dates

On this page

Overview

The preserved OpenROV hardware repository spans several DIY underwater vehicle versions. This entry selects its 2.8 mechanical directory and separately preserves the linked electronics repository, which contains a controller package explicitly named 2.8. That naming gives a useful starting point for matching sources, but does not establish a complete reproduced vehicle. [1] [5] [6] [7]

Is this for you?

Known limitations
  • Mechanical repository uses CC-BY-NC-SA-4.0; electronics rights not established by the mechanical grant
  • Upstream warns DXF drawings may need adjustment for a particular laser cutter
  • Complete matched vehicle BOM and firmware/application versions remain unresolved
  • No fabrication, waterproofing or underwater test performed

[1] [5] [6] [7] [8]

3D preview

OpenROV 2.8 mechanical structure assembly. The project-published OpenROV 2.8 Full Assembly STEP export: laser-cut shell, fin, main structure, electronics chassis, electronics tube, end caps and both battery tubes at their source assembly placements. Motors, propellers, electronics, tether and seals are not in this file. Licensed CC BY-NC-SA 4.0 (noncommercial, share-alike); no commercial-use or manufacturing clearance is claimed. Fit, sealing and fabrication accuracy are not verified, and the README warns its DXF files may need adjustment for laser cutting.

Noncommercial license: the upstream README licenses this work under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International. This preview and the hosted original remain under that license with attribution to OpenROV; no commercial-use or manufacturing clearance is claimed. License: CC BY-NC-SA 4.0 · upstream notice.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original STEP (gzip) · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: OpenROV, revision 1268e948fb9c60c38a0b1f7c6450b466558e7342. Original and preview: CC-BY-NC-SA-4.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

What you need

Host computer

BeagleBone Black identified by the electronics README for the selected controller family.

[6]

Hardware & parts

Hardware configuration

DIY underwater remotely operated vehicle; selected 2.8 mechanical design.

[1] [5]

Controller

Controller-board family for OpenROV 2.6–2.8 uses an ATmega2560 and is designed to fit BeagleBone Black.

[6]

Assembly & first use

Project documentation [1]

Assembly

Selected archive contains Inventor, STEP and DXF files for battery tubes, electronics enclosure, main structure, shell and topside adapter.

[5]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

The mechanical files have a defined version and fabrication limit

The selected directory includes Inventor parts and assemblies, STEP exports and DXF drawings for battery tubes, the electronics enclosure, main structure, shell and topside adapter. The drawings encode different material thicknesses, including 3 mm and 6 mm parts. Those paths establish available design artifacts, not measured tolerances or a tested pressure enclosure. [5]

The upstream README explicitly warns that it does not guarantee DXF accuracy for direct laser cutting and that different machines can require adjustments. A builder still needs to inspect scale, material, kerf and fit for the chosen process. This review did not open every drawing in CAD, fabricate parts or test seals. [1] [5]

Match the controller family to the vehicle version

The electronics README distinguishes the controller family for OpenROV 2.6, 2.7 and 2.8 from the older 2.5B controller and the BeagleBone Cape for 2.3/2.4. It identifies an ATmega2560 and BeagleBone Black fit for the selected family, while the older cape uses an ATmega328. A shared OpenROV name is insufficient to choose firmware or wiring. [6]

The preserved 2.8 controller package includes schematic and board source files, Gerber outputs, layout PDFs and a board BOM spreadsheet. A controller-board BOM is not the full vehicle shopping list: batteries, motors, sealing parts, tether, topside equipment and the chosen mechanical parts still need configuration-specific reconciliation. No current complete delivered cost was verified. [5] [7]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: operating system, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Mar 13, 2019 [2]
Latest release
Not established
Profile updated
Oct 26, 2026
Sources last checked
Oct 1, 2026
Next review
Oct 31, 2026
Reviewed revision
1268e948fb9c60c38a0b1f7c6450b466558e7342 (commit snapshot; no published stable release found) · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · CC-BY-NC-SA-4.0
Explicit noncommercial share-alike grant in mechanical repository. Drawings are not fabrication or depth qualification. [1] [5] [8]
electronicsavailable · License not fully assessed
Board and schematic source, Gerber files, layout PDFs and board BOM preserved. Electronics-specific rights and complete vehicle matching not established; mechanical license not copied across repositories. [6] [7]
firmwarenot found · License not fully assessed
Complete matched vehicle application and controller firmware were not established in the two preserved hardware repositories. This does not assert that no separate public source exists. [1] [5] [6] [7]
softwarenot found · License not fully assessed
Complete matched vehicle application and controller firmware were not established in the two preserved hardware repositories. This does not assert that no separate public source exists. [1] [5] [6] [7]
documentationavailable · CC-BY-NC-SA-4.0
Mechanical repository overview and drawing set; complete matched assembly/operation manual not established in this review. [1]

Selected conventional remotely operated hardware design does not establish a learned policy or dataset requirement.

Source availability and reuse rights are separate checks

The mechanical repository explicitly applies CC BY-NC-SA 4.0. Its noncommercial condition matters when assessing reuse; it is not an unrestricted commercial hardware license. The separate electronics README does not establish that same grant, so this profile leaves electronics licensing unresolved rather than carrying the mechanical license across repositories. [1] [6] [8]

Neither hardware archive establishes a complete matched vehicle application, controller firmware and installation environment in this review. The entry preserves a historical design starting point, with software matching, current sourcing, assembly documentation and underwater qualification still separate. No board manufacture, installation, leak test or dive was performed. [1] [5] [6] [7]

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.