ORCA Hand hardware
End effectorTendon-driven hand family with base, touch, lite and joint-sensing variants; Feetech and Dynamixel motor-specific parts. [1] [2] [3] [4]
Build & first use →Official website
- Cost
- No current cost or bill of materials established yet.
- Source rights
- Some licenses are unresolved. Review licenses
- Unknowns
- host computer, tools, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware
- License
- CC-BY-4.0 · license not fully assessed for documentation · Details by part
Is this for you?
3D preview
ORCA v1 hand assembly. Assembly geometry from the upstream STEP. Purchased components are represented; their manufacturing sources and physical fit are not established by this preview.
The 3D preview loads after the page.
Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.
Download original STEP (gzip) · File checksums and provenance
Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.
Model sources
The preview uses the linked original design. Source grouping is retained where present; the caption identifies whether this is an assembly or one component.
Source, license and scale
Source: ORCA Hand by ORCA Dexterity, Inc. — CC BY 4.0, revision 7545769364b3c582f93c42936d2abe7e74afb741. Original and preview: CC-BY-4.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.
Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.
Hardware & parts
Assembly & first use
Project documentation [1] [2] [3] [4]
Cost
No current, complete configuration-specific build cost has been established for this profile.
Project notes
Mounting and application
The inventory includes FrankaConnector.step and FrankaConnector.stl CAD files. Their presence is interface evidence; exact configuration and fit remain untested. [1] [2] [3] [4]
Before sourcing the build
Select v1/v2, motor and sensing variant. The base package is Prints-1100.3mf with alternative motor-specific plates; touch has separate DX/FT packages. The README marks lite and joint-sensing 3MF packages as pending. Consult the assembly addendum for PTFE tubes, thumb pins, carpals hardware and V1100 spool changes. Franka connector CAD does not establish verified interoperability. [1] [2] [3] [4]
Files and reuse terms
Current pinned LICENSE explicitly applies CC-BY-4.0 to CAD/STL/3MF and code. It permits sharing and adaptation, including commercial use, with attribution and modification notices when sharing; patent and trademark rights are excluded. Separately selected controls and purchased components need their own rights review. [1] [2] [3] [4]
Available material includes mechanical files and a version-specific assembly addendum. They do not establish a complete, matched mechanical and control package. Current delivered cost and measured performance are not established; no hardware was built or tested for this profile.
What we checked
Source research only. No hardware assembly, performance testing, procurement or support qualification performed.
Not yet established
- Requirements: operating system, host computer, tools
- A step-by-step setup summary
Updates
- Upstream last updated
- Not established
- Latest release
- Not established
- Profile updated
- Oct 25, 2026
- Sources last checked
- Sep 30, 2026
- Next review
- Oct 30, 2026
- Reviewed revision
7545769
Source files and licenses
Current pinned LICENSE explicitly applies CC-BY-4.0 to CAD/STL/3MF and code. Do not carry forward older noncommercial descriptions. Select v1/v2, motor and sensing variant; use assembly addendum for changed parts. Franka connector drawing is integration evidence, not verified interoperability.
| Layer | Availability / license |
|---|---|
| mechanical design | available · CC-BY-4.0 Current pinned LICENSE explicitly applies CC-BY-4.0 to CAD/STL/3MF and code. Do not carry forward older noncommercial descriptions. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] |
| electronics | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] |
| firmware | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] |
| software | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] |
| documentation | available · License not fully assessed Current pinned LICENSE explicitly applies CC-BY-4.0 to CAD/STL/3MF and code. Do not carry forward older noncommercial descriptions. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] |
This profile scopes hardware tooling, without selecting a learned controller or training dataset.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
- S001 ORCA Hand hardware pinned tree
Revision, date & where cited
github.com · revision
7545769· Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S002 ORCA Hand hardware / LICENSE
Revision, date & where cited
orcahand · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S003 ORCA Hand hardware / README.md
Revision, date & where cited
orcahand · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S004 ORCA Hand hardware / orca_v2/base/ASSEMBLY_ADDENDUM.md
Revision, date & where cited
orcahand · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S005 Upstream image and reuse attribution
Media-only review: Upstream photograph of an ORCA Hand with its associated interface. ORCA Hand by ORCA Dexterity, Inc. — CC BY 4.0. Reuse basis: CC-BY-4.0; inspected LICENSE and the pinned file inventory for nearer notices. Original image unchanged; displayed responsively. This does not refresh technical or cost evidence.Revision, date & where cited
ORCA Dexterity, Inc. · github.com · revision
7545769· Image SHA-256 5c663d1b391aae6c0eaaa54377625298c20cff5790c20f625f0f20e808035f5f; repository · Accessed Oct 25, 2026
Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1
Change history
2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.
2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.