Open Source RoboticsRobots, software & learning

Oxygem modified Replistruder 5

End effector

Modified Replistruder 5 with NEMA17, 3:1 GT2 belt reduction, anti-backlash TR8×1.5 lead screw and 1 mL Hamilton syringe. [1] [2] [3]

Build & first use →Official website

For
Builders evaluating this tooling design and its integration requirements [1] [2] [3]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Report photograph of Oxygem’s modified Replistruder 5 mounted on the Ender 5 Pro carriage, showing its GT2 belt drive and syringe.
Report photograph of Oxygem’s modified Replistruder 5 mounted on the Ender 5 Pro carriage, showing its GT2 belt drive and syringe. Group Oxygem — Hannah Seo, Hui Sin Phang, Junyuan Guan, Magor Pocsveiler, Ricky Zhang, Saad Ayub, Vera Rachkova and Zifeng Guo · CC-BY-SA-4.0. Embedded image extracted from page 9 of the source PDF and losslessly decoded to PNG; no retouching. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
License
CC-BY-SA-4.0 · license not fully assessed for documentation · Details by part

Research details and dates

On this page

Is this for you?

Known limitations
  • Lead screw requires machining; PETG part variants and syringe must match. Published low-speed printer settings cannot establish cobot/delta performance.
  • No hardware build or test performed.

Source-researched; no physical verification.

[1] [2] [3] · Editorial assessment

Hardware & parts

Hardware configuration

Paste and syringe extrusion

Source-researched; no physical verification.

[1] [2] [3] · Editorial assessment

Assembly & first use

Project documentation [1] [2] [3]

Assembly

Lead screw requires machining; PETG part variants and syringe must match. Published low-speed printer settings cannot establish cobot/delta performance.

Known prerequisites and unresolved assembly decisions; not a complete build instruction.

[1] [2] [3] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. The supplied enclosure assembly contains only the enclosure and lid. It does not establish the printer, extrusion mechanism or their relative placement, so it cannot represent the complete bioprinter.

Project notes

Mounting and application

Ender 5 Pro adapter and Duet 3 6HC/RepRapFirmware are documented; no arm mount verified. [1] [2] [3]

Before sourcing the build

The README specifies lead-screw ends reduced to 5 mm and a milled flat for the set screw. Select the Hamilton 1001 TLL syringe and match the PETG geometry and machined screw before ordering. Start with the pinned repository and its README BOM. Published low-speed printer settings cannot establish cobot/delta performance. [1] [2] [3]

Files and reuse terms

CC-BY-SA-4.0 for this derivative; retain original Replistruder attribution. [1] [2] [3]

The inventory lists Fusion, STEP and STL files, whose fabrication suitability has not been validated. The README names firmware configurations and a Cura slicing profile; their configuration match and reuse terms still require review. Keep the derivative’s CC-BY-SA-4.0 declaration separate from unresolved source coverage of controls and purchased components. Current delivered cost and measured performance are not established; no hardware was built or tested for this profile.

What we checked

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 26, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
382ec75

Source files and licenses

CC-BY-SA-4.0 for this derivative; retain original Replistruder attribution. Lead screw requires machining; PETG part variants and syringe must match. Published low-speed printer settings cannot establish cobot/delta performance.

LayerAvailability / license
mechanical designavailable · CC-BY-SA-4.0
CC-BY-SA-4.0 for this derivative; retain original Replistruder attribution. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3]
electronicsnot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3]
firmwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3]
softwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3]
documentationavailable · License not fully assessed
CC-BY-SA-4.0 for this derivative; retain original Replistruder attribution. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3]

This profile scopes hardware tooling, without selecting a learned controller or training dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

  • S001 Oxygem modified Replistruder 5 pinned tree
    Revision, date & where cited

    github.com · revision 382ec75 · Accessed Sep 30, 2026


    Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more
  • S002 Oxygem modified Replistruder 5 / LICENSE
    Revision, date & where cited

    theMPR1 · raw.githubusercontent.com · Accessed Sep 30, 2026


    Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more
  • S003 Oxygem modified Replistruder 5 / README.md
    Revision, date & where cited

    theMPR1 · raw.githubusercontent.com · Accessed Sep 30, 2026


    Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more
  • S004 Upstream image and reuse attribution
    Media-only review: Report photograph of Oxygem’s modified Replistruder 5 mounted on the Ender 5 Pro carriage, showing its GT2 belt drive and syringe. Reuse basis: CC-BY-SA-4.0. Pinned project report page 9 Figure 2.4(d) is the team’s photograph of its own modified Replistruder 5, not the original Replistruder figure 2.3 or CAD render 2.4(c). Section 2.1.2 matches selected NEMA17, 3:1 GT2 belt and TR8x1.5 modification, with the mounted syringe visible. README licenses this work under CC BY-SA 4.0 with full root legal text; no separate exclusion/third-party credit appears for own-build figure 2.4(d). Credit preserves all report authors. No performance/medical claims adopted. Embedded image extracted from page 9 of the source PDF and losslessly decoded to PNG; no retouching. Technical/cost evidence dates unchanged.
    Revision, date & where cited

    Group Oxygem — Hannah Seo, Hui Sin Phang, Junyuan Guan, Magor Pocsveiler, Ricky Zhang, Saad Ayub, Vera Rachkova and Zifeng Guo · github.com · revision 382ec75 · Group Project Final Report V3, An Open-Source FRESH 3D Bioprinter, 16 April 2026, page 9 Figure 2.4(d); pinned README License and LICENSE; image SHA-256 dff2fa9a1ad236c6fccc226a5957163c089daa1f39db409d4c3908a83b714e75 · Accessed Oct 26, 2026

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.