Linear-stepper paste extruder
End effectorCompact syringe plunger driven by an NPM PFCL25-48Q4 linear stepper; printed parts optimized for ABS. [1] [2] [3]
Build & first use →Official website
- Cost
- No current cost or bill of materials established yet.
- Source rights
- Some licenses are unresolved. Includes noncommercial terms. Review licenses
- Unknowns
- host computer, tools, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details
Licenses & related hardware
- License
- CC-BY-NC-3.0 (noncommercial) · license not fully assessed for documentation · Details by part
Is this for you?
- Known limitations
- Experimental design. Confirm syringe dimensions, exact motor/60 mm stroke option and pressure/flow limits; no general delta pick-and-place or cobot compatibility claimed.
- No hardware build or test performed.
Source-researched; no physical verification.
Hardware & parts
Assembly & first use
Project documentation [1] [2] [3]
- Assembly
Experimental design. Confirm syringe dimensions, exact motor/60 mm stroke option and pressure/flow limits; no general delta pick-and-place or cobot compatibility claimed.
Known prerequisites and unresolved assembly decisions; not a complete build instruction.
Cost
No current, complete configuration-specific build cost has been established for this profile.
3D preview
Preview not available yet. The reviewed design license includes a noncommercial restriction. The original design is linked; a hosted derivative needs a separate reuse decision.
Model sources
The reviewed design license includes a noncommercial restriction. The original design is linked; a hosted derivative needs a separate reuse decision.
Project notes
Mounting and application
README explicitly targets Rostock mini, a delta-printer application. [1] [2] [3]
Before sourcing the build
Experimental design. Confirm syringe dimensions, exact motor/60 mm stroke option and pressure/flow limits; no general delta pick-and-place or cobot compatibility claimed. [1] [2] [3]
Files and reuse terms
The license.txt file states CC-BY-NC-3.0, including attribution and a noncommercial restriction. Intended commercial use requires rights clarification. Separately selected controls and purchased components need their own source and license review. [1] [2] [3]
The inspected inventory lists STL and OpenSCAD files, including baseplate and syringe-holder parts, without an identified BOM. The CAD was not fabrication-validated, and a complete matched mechanical/control package remains unestablished. Current delivered cost and measured performance are not established; no hardware was built or tested for this profile.
What we checked
Source research only. No hardware assembly, performance testing, procurement or support qualification performed.
Not yet established
- Requirements: operating system, host computer, tools
- A step-by-step setup summary
Updates
- Upstream last updated
- Not established
- Latest release
- Not established
- Profile updated
- Sep 30, 2026
- Sources last checked
- Sep 30, 2026
- Next review
- Oct 30, 2026
- Reviewed revision
c293136
Source files and licenses
CC-BY-NC-3.0 in license.txt. Experimental design. Confirm syringe dimensions, exact motor/60 mm stroke option and pressure/flow limits; no general delta pick-and-place or cobot compatibility claimed.
| Layer | Availability / license |
|---|---|
| mechanical design | available · CC-BY-NC-3.0 CC-BY-NC-3.0 in license.txt. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] |
| electronics | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] |
| firmware | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] |
| software | not found · License not fully assessed A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] |
| documentation | available · License not fully assessed CC-BY-NC-3.0 in license.txt. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] |
This profile scopes hardware tooling, without selecting a learned controller or training dataset.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
- S001 Linear-stepper paste extruder pinned tree
Revision, date & where cited
github.com · revision
c293136· Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S002 Linear-stepper paste extruder / README
Revision, date & where cited
geniekobayashi · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more - S003 Linear-stepper paste extruder / license.txt
Revision, date & where cited
geniekobayashi · raw.githubusercontent.com · Accessed Sep 30, 2026
Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more
Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1
Change history
2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.