Poppy Humanoid
Robot / hardware buildA printed research humanoid using 25 Dynamixel actuators and a documented legacy Odroid setup. [1]
Build & first use →Official websiteBill of materials
- For
- Research and education teams able to maintain a legacy robot environment [1]
- Cost
- No current cost yet. Upstream bill of materials [1]
- Source rights
- Some licenses are unresolved. Review licenses
- Unknowns
- tools, operating system not fully established. Review gaps
Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware
- License
- CC-BY-SA-4.0, GPL-3.0 · license not fully assessed for documentation · Details by part
Overview
The reviewed Poppy Humanoid release is 3.0.0. Its overview describes a printed research robot with 25 Dynamixel actuators and gives a historical full-build estimate of $8,000–9,000, roughly 60% attributed to those actuators. This is not a current regional quote; shipping, taxes, tools and present availability have not been established. [1] [2]
The README warns that direct SolidWorks downloads may return Git LFS placeholders. It directs builders to official release assets for CAD formats or to its cloning guide. Check the actual downloaded files before assuming a Git snapshot is a complete editable mechanical archive. [1]
The documented board route uses Odroid U3/XU4 and an Ubuntu 14.04-based image. Its roughly seven-hour assembly estimate is upstream's, not a measured installation or calibration result. Hardware assembly and restoring a usable software environment are separate work items. [1]
Hardware is declared CC BY-SA 4.0 and software GPL v3; Poppy name usage has separate restrictions. Start with hardware/doc/BOM.md and the matching assembly instructions, then reconcile CAD and board-image versions. No physical build, current cost comparison or support qualification was performed here. [1]
Is this for you?
- Known limitations
- Historical cost and assembly estimates are not current quotes or our measurements
- README warns that SolidWorks downloads can require release assets or Git LFS
3D preview
Left foot — simulation visual mesh. One left-foot visual mesh from the URDF simulation assets. It is not a verified manufacturing file or a complete humanoid.
The 3D preview loads after the page.
Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.
Download original STL · File checksums and provenance
This model contains one geometric body.
Model sources
The preview uses the linked original design. Source grouping is retained where present; the caption identifies whether this is an assembly or one component.
Source, license and scale
Source: Poppy project contributors, revision 6a1ea175f86e1b5a3063007e0c84b435cf22d111. Original and preview: CC-BY-SA-4.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STL does not declare units; confirm dimensions against the project design. No physical part tested.
Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.
What you need
- Host computer
Pinned instructions describe Odroid U3/XU4 and a supplied Ubuntu 14.04-based image.
Hardware & parts
Assembly & first use
Cost
No current, complete configuration-specific build cost has been established for this profile.
What we checked
Source research only; no installation, physical build or performance test performed. No affiliate links added.
Not yet established
- Requirements: operating system, tools
- A step-by-step setup summary
Updates
Source files and licenses
Available project sources support research coverage; complete build and commercial qualification remain separate.
| Layer | Availability / license |
|---|---|
| mechanical design | available · CC-BY-SA-4.0 Hardware terms declared in README; source completeness requires separate archive/release inspection. [1] [4] |
| electronics | not found · License not fully assessed No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4] |
| firmware | not found · License not fully assessed No complete artifact for this layer established in the inspected primary repository overview and archive inventory. External component/dependency sources require separate collection; this is not a claim of closed source. [1] [4] |
| software | available · GPL-3.0 Software declaration; platform images and dependencies need separate version checks. [1] [4] |
| documentation | available · License not fully assessed Documentation available; not a blanket license for linked photographs. [1] [4] |
This profile covers the described physical configuration and control route without a particular learned policy or dataset.
References
Each source links to the exact revision we read. “Used for” shows where this page relies on it.
Project sources
- S001 poppy-project/poppy-humanoid: README.md
Revision, date & where cited
github.com · revision
6a1ea17· Accessed Sep 30, 2026
Used for: Overview, Is this for you?, What you need, Hardware & parts and 2 more - S002 poppy-project/poppy-humanoid: commit 6a1ea17
- S004 poppy-project/poppy-humanoid: files
Revision, date & where cited
github.com · revision
6a1ea17· archive file inventory · Accessed Sep 30, 2026
Used for: Source files and licenses - S007 Upstream image and reuse attribution
Media-only review: Upstream project image of the Poppy Humanoid version 1.0; pictured hardware may differ from other revisions. Reuse basis: CC-BY-SA-4.0; inspected README.md and the pinned file inventory for nearer notices. Original image unchanged; displayed responsively. This does not refresh technical or cost evidence.Revision, date & where cited
Poppy Project and Inria contributors · github.com · revision
6a1ea17· Image SHA-256 1acb685f28fed92ef486ac2d4b3b9a2aebd335caa04acb031972fcdcb22ef527; repository · Accessed Oct 25, 2026
Videos
- S005 Poppy Project (YouTube channel)
The project’s own YouTube channel, linked from the project’s own documentation. Not reviewed by us for accuracy.Revision, date & where cited
YouTube channel Poppy Project · youtube.com · Accessed Oct 4, 2026
- S006 Movement of Poppy Humanoid, by Thomas Peyruse (17) (YouTube video)
Video from the project’s own channel (Poppy Project), linked from the project’s own documentation. Not reviewed by us for accuracy.Revision, date & where cited
YouTube video Poppy Project · youtube.com · Accessed Oct 4, 2026
Correction guidance · Discussion is not enabled · Profile format 0.5.0-draft.1
Change history
2026-10-04 — Added 2 YouTube reference(s) (S005, S006): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.
2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.