Open Source RoboticsRobots, software & learning

RealMan RMG24

End effector

Parallel gripper using the WHJ03 joint module, interface PCB and 24 V RS485/Modbus RTU control. [1] [2] [3] [4]

Build & first use →Official website

For
Builders evaluating this tooling design and its integration requirements [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream illustration of the RMG24 two-finger gripper, not a photograph.
Upstream illustration of the RMG24 two-finger gripper, not a photograph. RealMan Robotics contributors · OpenAtom Open Hardware License 1.0. Original image unchanged; displayed responsively.
Licenses & related hardware
License
OpenAtom Open Hardware License 1.0 · license not fully assessed for documentation · Details by part

Research details and dates

On this page

Overview

RMG24 is a parallel gripper built around RealMan’s WHJ03 joint module, an interface board and 24 V control. It offers RS485/Modbus RTU and I/O integration, but the published assembly model does not establish a complete machinable part set. [3] [1]

Is this for you?

Known limitations
  • RMG24 STEP is not proof of a complete machinable part set. Core WHJ03 source/sourcing, mechanical BOM and non-RM flange fit remain unresolved.
  • No hardware build or test performed.

Source-researched; no physical verification.

[1] [2] [3] [4] · Editorial assessment

3D preview

RealMan RMG24 gripper model. Source STEP geometry for the named configuration. Purchased-component representations are included where supplied; this preview does not verify physical fit or a working build.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original STEP · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: RealMan Robotics, revision 91f587b1d4efaab235f3d227ee614b28f35060c9. Original and preview: OpenAtom Open Hardware License 1.0. Preview conversion by Open Source Robotics; original file unchanged. Preview coordinates are centered and rounded to six decimal places. STEP preview triangulated in millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

Hardware & parts

Hardware configuration

Parallel and adaptive grippers

Source-researched; no physical verification.

[1] [2] [3] [4] · Editorial assessment

Assembly & first use

Project documentation [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17]

Assembly

RMG24 STEP is not proof of a complete machinable part set. Core WHJ03 source/sourcing, mechanical BOM and non-RM flange fit remain unresolved.

Known prerequisites and unresolved assembly decisions; not a complete build instruction.

[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Electrical interface versus mechanical fit

The README documents a custom six-pin aviation connector and a six-pin PH2.0 terminal. RM-arm connections are described directly; other manufacturers require pin-sequence adaptation. The PC route uses USB-to-RS485 and a shared power ground. Electrical communication support does not establish the flange geometry or fit of a non-RM arm. [3] [4]

Available sourcing material

The pinned inventory includes an RMG24 STEP model and interface-board BOM. That board list is not a complete mechanical parts list. The README describes board fabrication files and software resources, whose manufacturing suitability and matched revisions have not been validated here. Resolve WHJ03 source/sourcing and the mechanical BOM before treating the model as a reproducible complete gripper. [1] [3]

What we checked

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 25, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
91f587b

Source files and licenses

Hardware explicitly under OpenAtom Open Hardware License 1.0; third-party firmware licenses are separate. RMG24 STEP is not proof of a complete machinable part set. Core WHJ03 source/sourcing, mechanical BOM and non-RM flange fit remain unresolved.

LayerAvailability / license
mechanical designavailable · OpenAtom Open Hardware License 1.0
Hardware explicitly under OpenAtom Open Hardware License 1.0; third-party firmware licenses are separate. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17]
electronicsnot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17]
firmwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17]
softwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17]
documentationavailable · License not fully assessed
Hardware explicitly under OpenAtom Open Hardware License 1.0; third-party firmware licenses are separate. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17]

This profile scopes hardware tooling, without selecting a learned controller or training dataset.

Source rights

The hardware license is OpenAtom Open Hardware License 1.0. Included CMSIS files use Apache-2.0; the STM32 HAL notice refers to Package_license with a conditional BSD-3-Clause fallback. These notices do not establish the rights or source availability of the entire purchased WHJ03 module or a complete matched control package. [2] [11] [12]

Current delivered cost and measured performance are not established. No hardware was built or tested for this profile.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.