Open Source RoboticsRobots, software & learning

Replistruder 5

End effector

Syringe extrusion design for FRESH hydrogel printing, distributed as STL and STP in a versioned Zenodo archive. [1]

Build & first use →Official website

For
Builders evaluating this tooling design and its integration requirements [1]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Photograph of three Replistruder 5 syringe pumps installed in the authors’ multi-material FRESH bioprinter, from supplementary Figure S4B (2025). The surrounding OCT head and motion stages are part of that research setup.
Photograph of three Replistruder 5 syringe pumps installed in the authors’ multi-material FRESH bioprinter, from supplementary Figure S4B (2025). The surrounding OCT head and motion stages are part of that research setup. Daniel J. Shiwarski, Andrew R. Hudson, Joshua W. Tashman, Ezgi Bakirci, Samuel Moss, Brian D. Coffin and Adam W. Feinberg · CC-BY-4.0. Embedded image extracted from page 5 of the source PDF and losslessly decoded to PNG; no retouching. Cropped to isolate Figure S4B showing the three Replistruder 5 syringe pumps; full extracted image retained. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
License
CC-BY-4.0 · license not fully assessed for documentation · Details by part

Research details and dates

On this page

Is this for you?

Known limitations
  • Zenodo identifies a versioned archive and a publisher checksum. Complete pump BOM, syringe/drive specification, assembly and arm synchronization still need reconciliation.
  • No hardware build or test performed.

Source-researched; no physical verification.

[1] · Editorial assessment

3D preview

Replistruder 5 source-positioned printed core. Three official printed components—Core, CoreCover and Carriage—in their shared source coordinate frame. The two printer-specific mount alternatives are excluded because no host-printer configuration is selected. The syringe, drive hardware and host printer are not represented. Colors only distinguish components; physical fit and operation are not verified.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original source-positioned STL bundle (ZIP) · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: Joshua W. Tashman and Daniel J. Shiwarski, revision Zenodo record 7135874, published 2022-10-03. Original and preview: CC-BY-4.0. Preview conversion by Open Source Robotics; source files unchanged inside the downloadable bundle. Preview coordinates are centered and rounded to six decimal places. The three selected STL components retain their shared source-coordinate vertices and original component labels; no component placement was inferred. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

Hardware & parts

Hardware configuration

Paste and syringe extrusion

Source-researched; no physical verification.

[1] · Editorial assessment

Assembly & first use

Project documentation [1]

Assembly

Zenodo identifies a versioned archive and a publisher checksum. Complete pump BOM, syringe/drive specification, assembly and arm synchronization still need reconciliation.

Known prerequisites and unresolved assembly decisions; not a complete build instruction.

[1] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Mounting and application

Desktop-printer conversion; no robot-arm interface established. [1]

Before sourcing the build

The Zenodo record identifies v1, published October 3, 2022, and Replistruder5.zip with a publisher checksum. Complete pump BOM, syringe/drive specification, assembly and arm synchronization still need reconciliation. [1]

Files and reuse terms

The Zenodo record specifies CC-BY-4.0 for the scoped archive, with attribution required. Source availability and reuse rights for selected controls and purchased components need separate review. [1]

The reviewed archive listing does not establish a complete, matched mechanical and control package. Current delivered cost and measured performance are not established; no hardware was built or tested for this profile.

What we checked

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 26, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
Upstream document snapshot accessed 2026-09-30

Source files and licenses

Zenodo record explicitly specifies CC-BY-4.0. Zenodo identifies a versioned archive and a publisher checksum. Complete pump BOM, syringe/drive specification, assembly and arm synchronization still need reconciliation.

LayerAvailability / license
mechanical designavailable · CC-BY-4.0
Zenodo record explicitly specifies CC-BY-4.0. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1]
electronicsnot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1]
firmwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1]
softwarenot found · License not fully assessed
A complete revision-matched source set for this tooling configuration was not established in the inspected documents. Standalone controls and purchased components require separate review; this is not a claim that no code or electronic files exist. [1]
documentationavailable · License not fully assessed
Zenodo record explicitly specifies CC-BY-4.0. Availability refers to the scoped files described here, not a complete configuration-matched manufacturing pack. [1]

This profile scopes hardware tooling, without selecting a learned controller or training dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

  • S001 Replistruder 5 upstream documentation
    Revision, date & where cited

    zenodo.org · zenodo.org · Captured 2026-09-30 · Accessed Sep 30, 2026


    Used for: Is this for you?, Hardware & parts, Assembly & first use, Mounting and application and 3 more
  • S002 Upstream image and reuse attribution
    Media-only review: Photograph of three Replistruder 5 syringe pumps installed in the authors’ multi-material FRESH bioprinter, from supplementary Figure S4B (2025). The surrounding OCT head and motion stages are part of that research setup. Reuse basis: CC-BY-4.0. The authors explicitly identify the three photographed pumps as Replistruder 5 in supplementary Figure S4 and the main Methods. Their data-availability section links Zenodo concept 7135873; the actual API maps the selected version record 7135874 as the only and latest version (index 0). The other linked record 14975240 contains CHIPS/VAPOR scaffold and bioreactor CAD, not a different extruder revision. No Thin variant is identified in this paper. This is the original named Replistruder 5 in a custom research installation; it is not Replistruder 4, Allstruder, or OxyFresh. Image is an original author figure with no third-party credit or separate exclusion found. Article CC BY 4.0 covers original supplementary figure, independently of hardware-file licensing. Crop retains the complete right panel including all three pumps, syringes, labels and installation context; it does not imply the catalog archive includes the surrounding multi-material bioprinter or OCT hardware. PDF retrieved from the official Europe PMC supplementary-files endpoint; its full ZIP entry passed CRC and size checks despite the outer archive intentionally being a partial prefix. Embedded image extracted from page 5 of the source PDF and losslessly decoded to PNG; no retouching. Cropped to isolate Figure S4B showing the three Replistruder 5 syringe pumps; full extracted image retained. Technical/cost evidence dates unchanged.
    Revision, date & where cited

    Daniel J. Shiwarski, Andrew R. Hudson, Joshua W. Tashman, Ezgi Bakirci, Samuel Moss, Brian D. Coffin and Adam W. Feinberg · pmc.ncbi.nlm.nih.gov · Science Advances 11, eadu5905 (2025), DOI 10.1126/sciadv.adu5905; Supplementary Materials page 5, Figure S4B; extracted embedded image 0, cropped to right panel.; image SHA-256 f5fd348eb6b668ad6d5ed688fa3f197b95c152553030a57fac8e0da1840e575c · Accessed Oct 26, 2026

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.