Open Source RoboticsRobots, software & learning

Robonine SO-ARM 102

Robot / hardware build

Printable leader–follower robot arms for LeRobot teleoperation, with mixed-voltage serial servos and a parallel gripper. [1]

Build & first use →Official websiteSource codeUpstream build guideBill of materials

For
Robot builders researching desktop leader–follower arm pair. [1]
Cost
No current cost yet. Upstream bill of materials [1] [2]
Source rights
Named licenses are documented by part. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of the Robonine SO-ARM 102 follower arm.
Upstream photograph of the Robonine SO-ARM 102 follower arm. Robonine · CC BY 4.0. Original image unchanged.
Licenses & related hardware

Research details and dates

On this page

Overview

One teleoperation station pairs a hand-guided leader with a powered follower. Robonine supplies STEP, STL and 3MF files. Individual parts fit a 180 × 180 mm bed. The supplied plate layouts use a 256 × 256 mm bed. The layouts specify PET-CF for the follower links, PETG-CF for its base and gripper, and PLA+ for the leader. [1] [2]

Both arms use Waveshare Bus Servo Adapters. The leader uses the 7.4 V model of the STS3215 servo and runs on a 5 V, 2 A supply. Robonine recommends 12 V at 5 A or greater for the follower. The listed supply connectors are 5.5 × 2.1 mm. Verify servo placement and keep the two supplies matched to their arms. For LeRobot, the documented pairing uses the SO-ARM 102 follower plugin with the standard so101_leader type. Robonine links servo ID and calibration instructions from its setup section. [1] [2]

Robonine estimates $342.40 for the listed components and $388.40 including the quantities of filament used, according to its README. The detailed BOM’s filament line costs add to $32.70, while the published filament subtotal is $46.00. Reconcile that difference before using the headline estimate to plan a purchase. Buying the example full packs and spools is about $430. The estimates exclude shipping, tax, tools, a computer, a printer, electricity and labor. The project licenses its hardware designs under CERN-OHL-P-2.0, software under Apache-2.0, and documentation and images under CC BY 4.0. This source review did not verify print fit, current supplier pricing or physical operation. [1] [2] [3]

Is this for you?

Known limitations
  • A delivered price, print tolerances and physical operation remain unverified. Purchased servo firmware has separate terms.

Scoped to the inspected sources and verification performed.

[1] · Editorial assessment

Hardware & parts

Upstream bill of materials [1] [2]

Hardware configuration

Desktop leader–follower arm pair

[1]

Assembly & first use

Open the upstream getting-started guide [1]

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. The upstream design is linked below. An interactive preview has not been prepared for this profile.

What we checked

Source review only. No physical build or runtime test. Image credited to upstream.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Nov 15, 2026
Sources last checked
Nov 15, 2026
Next review
Dec 15, 2026
Reviewed revision
4325279

Source files and licenses

Includes a documented physical robot design with scope and reuse terms described by artifact.

LayerAvailability / license
mechanical designavailable · CERN-OHL-P-2.0
No separately licensed implementation located for this layer in the reviewed sources. [1]
electronicsnot found · License not fully assessed
No separately licensed implementation located for this layer in the reviewed sources. [1]
firmwarenot found · License not fully assessed
No separately licensed implementation located for this layer in the reviewed sources. [1]
softwareavailable · Apache-2.0
No separately licensed implementation located for this layer in the reviewed sources. [1]
documentationavailable · CC BY 4.0
No separately licensed implementation located for this layer in the reviewed sources. [1]

This entry scopes the physical robot and its build documentation.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5

Change history

2026-11-15 — Initial source-reviewed hardware profile and attributed upstream image.