Open Source RoboticsRobots, software & learning

RoboParty RP1

Robot / hardware build

Bipedal humanoid with released SolidWorks source, board fabrication data and separate control and simulation repositories. [1]

Build & first use →Official websiteSource codeUpstream build guideBill of materials

For
Robot builders researching full-body bipedal humanoid. [1]
Cost
No current cost yet. Upstream bill of materials [1] [2]
Source rights
Some licenses are unresolved. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream illustration of the RP1 humanoid from the front, side and rear.
Upstream illustration of the RP1 humanoid from the front, side and rear. RoboParty · CC BY-SA 4.0. Original image unchanged. Preview re-encoded for faster display; the link opens the original file.
View RoboParty’s photo of the RP1 vaulting a block. [7]
Licenses & related hardware
License
CERN-OHL-W-2.0, CC BY-SA 4.0 · license not fully assessed for firmware, software · Details by part

Research details and dates

On this page

Overview

Start with the RP1.3.4 BOMs for the 5DOF + MotionHead or 7DOF + MotionHead configuration. The hardware repository lists native SolidWorks parts and assemblies, a Parasolid model, editable drawings, board production files and harness drawings. Keep the CAD, BOM and control configuration aligned before sourcing machined parts or boards. [1] [2] [4] [5]

RoboParty licenses its own manufacturing design files under CERN-OHL-W-2.0 and explanatory images and documentation under CC BY-SA 4.0. Third-party files retain their original terms. The platform index points to separate robot-description, deployment and firmware repositories. The ROMOMO repository supplies joint drawings, protocol documentation and reports. Complete joint-controller source coverage and compatibility with a particular RP1.3.4 build remain unverified. [3] [5] [6]

Is this for you?

Known limitations
  • A complete current cost, actuator firmware coverage and a matched hardware and control build remain unverified.

Scoped to the inspected sources and verification performed.

[1] · Editorial assessment

Hardware & parts

Upstream bill of materials [1] [2]

Hardware configuration

Full-body bipedal humanoid

[1]

Assembly & first use

Open the upstream getting-started guide [1]

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. The upstream design is linked below. An interactive preview has not been prepared for this profile.

What we checked

Source review only. No physical build or runtime test. Image credited to upstream.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Nov 15, 2026
Sources last checked
Nov 15, 2026
Next review
Dec 15, 2026
Reviewed revision
471bebd

Source files and licenses

Includes a documented physical robot design with scope and reuse terms described by artifact.

LayerAvailability / license
mechanical designavailable · CERN-OHL-W-2.0
No separately licensed implementation located for this layer in the reviewed sources. [1] [3]
electronicsavailable · CERN-OHL-W-2.0
No separately licensed implementation located for this layer in the reviewed sources. [1] [3]
firmwareavailable · License not fully assessed
Platform firmware and joint-module documentation are listed. Complete joint firmware coverage remains unverified. [5] [6]
softwareavailable · License not fully assessed
Platform index links separate control and simulation repositories with repository-specific terms. [5]
documentationavailable · CC BY-SA 4.0
No separately licensed implementation located for this layer in the reviewed sources. [1] [3]

This entry scopes the physical robot and its build documentation.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Correction guidance · Discussion is not enabled · Profile format 0.7.0-draft.5

Change history

2026-11-15 — Initial source-reviewed hardware profile and attributed upstream image.

2026-11-15 — Added a link to the upstream photograph of the physical robot.