Open Source RoboticsRobots, software & learning

SoAG soft gripper

End effector

A pneumatic soft gripper made with cast elastomer and printed molds. [1]

Build & first use →Official website

For
Research builders evaluating end-effector fabrication and integration [1]
Cost
No current cost or bill of materials established yet.
Source rights
Named licenses are documented by part. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Still from an upstream demonstration: a soft actuator segment used by SoAG; this is not the complete gripper or an aerial robot.
Still from an upstream demonstration: a soft actuator segment used by SoAG; this is not the complete gripper or an aerial robot. Zhichao Liu and SoAG contributors · MIT. Still taken from the upstream animation; no other changes.
Licenses & related hardware

Requirements · Research details and dates

On this page

Overview

This profile covers the soft actuator subsystem of the SoAG aerial robot. The gripper uses cast elastomer, printed molds and pneumatic actuation; aircraft dimensions and mass must not be treated as gripper specifications. [1]

Is this for you?

Known limitations
  • Define gripper-only BOM, elastomer and pressure specification, leak/recovery protocol and current suppliers. Aircraft mass must not be reported as gripper mass.
  • No physical assembly, calibration, performance or support qualification performed.

Source review and explicit limits of this work.

[1] [2] [3] · Editorial assessment

What you need

Dependencies
  • PLA molds, flexible 80A resin bases, elastomer and Sil-Poxy; two micro pumps, valve, MOSFET module and Arduino Nano in the described pneumatic system.

[1] [2] [3]

Hardware & parts

Hardware configuration

Soft grippers

Editorial grouping from hardware design.

[1] · Editorial assessment

Assembly & first use

Project documentation [1]

Assembly

Print molds/bases, mix and degas elastomer, cast and cure, bond layers, assemble pneumatic regulation and test on a fixture before any host integration.

Research synopsis of upstream route; not independently executed instructions.

[1] [2] [3] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. CAD files were identified. A configuration-matched assembly and its file-level reuse scope have not yet been verified for this preview.

Project notes

Fabrication route

The documented process uses PLA molds and bases printed in flexible 80A resin. It involves mixing and degassing elastomer, casting and curing, then bonding layers with Sil-Poxy. Access to a degassing chamber is part of that route. The base-layer process also uses silicone surrounding the flexible base; distinguish the PLA mold, resin base and cast material when selecting fabrication equipment. [1]

Start with Hardware/Actuator/STL and Hardware/Actuator/Solidworks at the cited revision. These provide a design starting point, not a reconciled gripper-only shopping list. The pneumatic system described by the project includes two micro pumps, a valve, a MOSFET module and Arduino Nano. [1] [3]

Control and integration

Software/Arduino/actuation/actuation.ino and Software/ROS/flying_gripper are the documented control starting points. The original aircraft uses Arduino and ROS 1/rosserial; other host integration has not been verified here. As an editorial recommendation, establish a fixture-test procedure before host integration; a validated leak, recovery and pressure-test protocol is not supplied by this review. [1] [3]

Open questions and terms

This review has not established a complete gripper-only BOM, exact elastomer and operating-pressure specifications, current suppliers or a complete delivered cost. File availability does not establish a compatible mechanical and control configuration. No hardware was built or tested. [1] [3]

The repository's root license is MIT, with copyright and permission-notice retention. The evidence does not establish the reuse terms of externally linked GrabCAD aircraft designs; the repository license does not resolve those external rights. [2]

What we checked

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 25, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
a72c7fbb500426955e7b81f4e0155c3ceeac6807; Soft actuator subsystem of SoAG aerial robot, not entire aircraft

Source files and licenses

Source-researched component coverage; complete build, commercial rights and performance qualification remain separate.

LayerAvailability / license
mechanical designavailable · MIT
Root MIT; external GrabCAD aircraft designs are separately scoped. [1] [2] [3]
electronicsnot found · License not fully assessed
Inspected sources do not establish a complete revision-matched source set for this layer. This finding does not mean the purchased components are closed source. [1] [2] [3]
firmwarenot found · License not fully assessed
Inspected sources do not establish a complete revision-matched source set for this layer. This finding does not mean the purchased components are closed source. [1] [2] [3]
softwarenot found · License not fully assessed
Inspected sources do not establish a complete revision-matched source set for this layer. This finding does not mean the purchased components are closed source. [1] [2] [3]
documentationavailable · MIT
Root MIT; external GrabCAD aircraft designs are separately scoped. [1] [2] [3]

This configuration is reviewed as a physical end effector with ordinary control, without a selected learned policy or dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

Videos

  • S004 video3 frontiers (YouTube video)
    Video uploaded by Zhichao Liu, linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video Zhichao Liu · youtube.com · Accessed Oct 4, 2026

  • S005 video1 frontier (YouTube video)
    Video uploaded by Zhichao Liu, linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video Zhichao Liu · youtube.com · Accessed Oct 4, 2026

  • S006 frontier22-Catching (YouTube video)
    Video uploaded by Zhichao Liu, linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video Zhichao Liu · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Deep source acquisition, licensing and configuration review in isolated end-effector research staging.

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.

2026-10-04 — Added 3 YouTube reference(s) (S004, S005, S006): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.