Open Source RoboticsRobots, software & learning

Sowbot / Feldfreund

Robot / hardware build

Experimental agricultural robot integration stack using ROS 2 Jazzy, ESP32/Lizard control and RTK GNSS; the selected sources distinguish Gazebo mission results from incomplete hardware validation. [1]

Build & first use →Official website

For
Research teams able to measure their hardware, validate controls and maintain experimental ROS systems [1]
Cost
No current cost or bill of materials established yet.
Source rights
Named licenses are documented by part. Review licenses
Unknowns
tools not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Licenses & related hardware

Requirements · Research details and dates

On this page

Overview

The repository historically named feldfreund_devkit_ros now describes the Sowbot ROS 2 Jazzy stack. The selected development architecture uses ESP32/Lizard control and separate executive and perception computers, with RTK GNSS and wheel odometry. This entry covers that preserved integration source, not a complete manufactured robot kit. [1] [4] [5]

Is this for you?

Known limitations
  • Multi-row mission results reported in Gazebo do not establish complete field validation
  • GNSS antenna lever arms remain zero placeholders in selected configuration
  • IMU comments disagree about integration state
  • Battery cutoff expression is marked for confirmation
  • Complete robot CAD, board source and firmware payload not preserved

[1] [5] [6] [7]

3D preview

Approximate simulation model, not hardware CAD (sowbot_01.xacro, robot amiga_ng). Approximate simulation model, not hardware CAD. This is the default Gazebo robot description of the project: sowbot_01.xacro in src/devkit_simulation at commit 910bb68 (the default urdf argument of sim.launch.py), expanded unchanged with its default arguments (use_lidar false, so no lidar link) and shown at zero joint positions. The source names the robot amiga_ng and builds it only from boxes and cylinders sized from reference dimensions that its comments mark as approximate (RTU.V4): two tracks with drive and idler rollers, two side body pods, a transverse top frame, a mast with a comms box, GPS, IMU and two OAK-D camera frames, an emergency stop and a front camera, 19 links in all, with sensor positions kept from the Amiga-NG description. It shows rough proportions and sensor positions for simulation only; it is not a model of the physical Sowbot or Feldfreund hardware, and the pinned repository contains no hardware CAD. Licensed MIT in the repository LICENSE (Zauberzeug GmbH and Agroecology Lab Ltd); the devkit_simulation package metadata declares Apache-2.0. Fit and motion are not verified.

Approximate simulation model, not hardware CAD. License notices differ: the feldfreund_devkit_ros repository LICENSE is the MIT License (“Copyright (c) 2025 Zauberzeug GmbH”, “Copyright (c) 2026 Agroecology Lab Ltd”), while the devkit_simulation package.xml declares Apache-2.0. Both are permissive; Open Source Robotics shows the model with attribution to the copyright holders and keeps both notices with the download. No manufacturing or other clearance is claimed. License: feldfreund_devkit_ros LICENSE (MIT); package.xml Apache-2.0 · upstream notice.

The 3D preview loads after the page.

Drag to orbit · Scroll or pinch to zoom · Right-drag to pan. Use the view buttons for front, side and top views. The tree shows names supplied by the source; unnamed bodies remain labeled as such.

Download original URDF source bundle (ZIP) · File checksums and provenance

Separate bodies can be inspected in the model tree. Explode is a viewing aid, not an assembly sequence.

Source, license and scale

Source: Agroecology Lab and Zauberzeug (feldfreund_devkit_ros contributors), revision 910bb68d145efa06c3ebec15161e0eaa20691c18. Original and preview: MIT (repository LICENSE); devkit_simulation package.xml declares Apache-2.0. Preview conversion by Open Source Robotics; source files unchanged inside the downloadable bundle. Preview coordinates are centered and rounded to six decimal places. URDF visual origins, mesh scales and joint transforms applied at zero joint positions, then metres converted to millimetres. No physical part tested.

Viewer: three-cad-viewer 5.0.7 (MIT license). Confirm scale and manufacturing settings before printing.

What you need

Operating system
  • Armbian on the documented Avaota A1 hardware
  • Containerized ROS 2 Jazzy
  • Linux-oriented host setup; Windows route explicitly untested

[1]

Host computer

README describes two Avaota A1 / Allwinner T527 computers for executive and perception roles.

[1]

Dependencies
  • Docker and ROS 2 Jazzy
  • Nav2, topological_navigation and Fields2Cover
  • Separately pinned Lizard firmware source and its submodules
  • GNSS correction and measured hardware configuration

[1] [5] [6]

Hardware & parts

Hardware configuration

Agricultural research robot integration; FusionCore configuration explicitly discusses a tracked platform.

[1] [6]

Controller

ESP32 with Lizard DSL for the selected development phase; separate ROS 2 executive and perception computers.

[1] [5]

Sensors
  • Dual u-blox F9P GNSS receivers
  • Wheel odometry
  • BNO085 IMU named in the fusion configuration, with inconsistent integration comments

[1] [6]

Assembly & first use

Project documentation [1]

Calibration

Measure GNSS antenna lever arms and reconcile sensor topics and battery cutoff with the physical robot.

[6] [7]

Cost

No current, complete configuration-specific build cost has been established for this profile.

Project notes

Separate reported simulation from field results

The README reports multi-row mission following in Gazebo and explicitly lists remaining Jazzy hardware validation. It separately reports iteration of visual row following against a lettuce crop. Those statements concern different subsystems and do not establish that the entire navigation, localization and monitoring stack has passed a complete field qualification. The repository also describes itself as experimental and under active development. [1]

Its current hardware sketch names two Avaota A1 boards using Allwinner T527 processors, with an ESP32 controller. Later controller and operating-system designs appear as future architecture or roadmap items. They should not be recorded as installed features of the selected configuration. The README also contains older setup sections, so the snapshot needs internal configuration reconciliation before deployment. [1]

Measure the physical quantities that the configuration leaves open

The FusionCore configuration sets all three GNSS antenna lever-arm coordinates to zero and explicitly says they need measurement on the physical robot. It accepts RTK-fixed position updates with the selected fix threshold; that setting is a filter policy, not proof of measured positioning accuracy. [6]

The same file has inconsistent IMU comments: an introductory comment says the BNO085 is wired and publishing, while a later heading still says the IMU is not yet wired. This review records that ambiguity instead of deciding the physical integration state from one comment. The robot and running topics would need inspection to resolve it. [6]

The monitoring configuration contains a battery-voltage condition at 44.0 V marked for confirmation against the BMS cutoff. That is an unfinished hardware-specific value, not a catalog recommendation. The upstream README also requires an independent physical emergency stop and says software stops are not a substitute. No safety function or stop performance was tested here. [1] [7]

Preserve the separate firmware revision

The Lizard setup guide specifies commit 87ab4e198d3af2a274e60292ee204b722f939b5e, says it matches the Docker integration, and keeps the firmware in a separate checkout. It identifies an ESP32-S3 build using the Espressif IDF 5.3.1 container. The preserved ROS archive therefore does not include the complete matching firmware tree or its submodule payloads. [5]

The source repository uses MIT, but external packages, perception weights and planned datasets need their own evidence and license review. The archive does not establish a complete robot CAD package, electronics manufacturing set or delivered build cost. No Docker build, firmware flashing, calibration, motion test or agricultural field trial was performed by this catalog. [1] [3] [4] [5]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: tools
  • A step-by-step setup summary

Updates

Upstream last updated
Sep 29, 2026 [2]
Latest release
Not established
Profile updated
Oct 4, 2026
Sources last checked
Oct 1, 2026
Next review
Oct 31, 2026
Reviewed revision
910bb68d145efa06c3ebec15161e0eaa20691c18 (commit snapshot; no published stable release found) · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designnot found · License not fully assessed
Selected source is an integration stack. Complete matched robot fabrication, board manufacturing and Lizard firmware payloads are not established by this archive. [1] [4] [5]
electronicsnot found · License not fully assessed
Selected source is an integration stack. Complete matched robot fabrication, board manufacturing and Lizard firmware payloads are not established by this archive. [1] [4] [5]
firmwarenot found · License not fully assessed
Selected source is an integration stack. Complete matched robot fabrication, board manufacturing and Lizard firmware payloads are not established by this archive. [1] [4] [5]
softwareavailable · MIT
Selected ROS integration repository; external dependencies, model weights and firmware have separate source and license scope. [1] [3] [5] [6] [7]
model weightsnot found · License not fully assessed
README names perception model work and planned datasets; matching released payloads and license scope were not established in this review. [1]
datasetsnot found · License not fully assessed
README names perception model work and planned datasets; matching released payloads and license scope were not established in this review. [1]
documentationavailable · MIT
Selected ROS integration repository; external dependencies, model weights and firmware have separate source and license scope. [1] [3] [5] [6] [7]

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

Videos

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-10-04 — Added 1 YouTube reference(s) (S008): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.