Open Source RoboticsRobots, software & learning

Stanford Doggo

Robot / hardware build

A historical eight-actuator quadruped using coaxial leg mechanisms, Teensy control and customized ODrive firmware. [1]

Build & first use →Official website

For
Legged robotics researchers; Experienced mechanical and embedded-system builders [1]
Cost
No current cost or bill of materials established yet.
Source rights
Some licenses are unresolved. Review licenses
Unknowns
host computer, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Upstream photograph of a Stanford Doggo quadruped build.
Upstream photograph of a Stanford Doggo quadruped build. Nathan Kau and Stanford Doggo contributors · MIT. Original image unchanged; displayed responsively. Preview re-encoded for faster display; the link opens the original file.
Licenses & related hardware
License
MIT · license not fully assessed for mechanical design, electronics, firmware · Details by part

Requirements · Research details and dates

On this page

Overview

Doggo is an eight-actuator quadruped with four two-axis legs, coaxial shafts and belt-driven mechanisms. We preserved parent release 1.0 and the exact Doggo and ODrive commits referenced by that release. The current project README carries an end-of-life notice, so the archived release should be treated as a historical research starting point. [1] [2] [5] [6] [9]

Is this for you?

Known limitations
  • Current project README carries an end-of-life notice
  • Release README and BOM differ on ODrive voltage, encoder designation and relay choice
  • Exact release-pinned firmware lists some advertised gait commands as nonworking or unstable
  • Nested firmware dependencies and complete CAD/configuration matching unresolved

[1] [5] [7] [9]

What you need

Tools
  • Fabrication services for machined, waterjet, carbon-fiber and printed components
  • Drills and taps for post-processing
  • Electrical assembly and connector tools

[1] [5] [7] [9]

Hardware & parts

Hardware configuration

Quadruped with four two-degree-of-freedom legs

[1] [5] [7] [9]

Actuators
  • Eight T-Motor 5212 KV340 units in the BOM

[1] [5] [7] [9]

Controller

Teensy 3.5 and four ODrive controllers with customized firmware

[1] [5] [7] [9]

Degrees of freedom

8

[1] [5] [7] [9]

Assembly & first use

Project documentation [1] [5] [7] [9]

Assembly

Waterjet/routed structure, printed pulleys and fittings, coaxial shafts and molded silicone feet.

[1] [5] [7] [9]

Calibration

Release overview describes a startup leg calibration routine before idle mode; not reproduced.

[1] [5] [7] [9]

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. Design-source links are available, but the reviewed record does not establish unambiguous reuse rights for a hosted CAD preview.

Project notes

The fabrication pack needs reconciliation

The release's FullCAD file is an Autodesk link, not the CAD assembly itself. Its BOM also links a contributor collection by Sean Kirmani; we preserved that collection, including fabrication files. These are separate sources, and their exact correspondence to the release has not been established. [4] [7] [8]

The mechanical work spans waterjet or routed structural parts, coaxial shafts, printed components and molded silicone feet. Upstream's design notes describe pulley-print orientation and the tradeoff between belt tension and friction. That makes dimensional fitting and assembly practice relevant to reproduction, beyond whether a STEP or STL file downloads successfully. [1]

There are purchasing mismatches to resolve. The release README describes 48 V ODrive hardware and a Gigavac relay, while the captured BOM lists 24 V ODrives and a solid-state relay replacement. It also uses a different encoder designation. Do not combine those references into a presumed matched electrical configuration. The workbook's historical prices and approximate fabrication quotes do not establish a current complete delivered cost. [1] [7]

Read the selected firmware's behavior list

The release-pinned Teensy README identifies trot as its working forward gait, labels bound unstable, and lists walk and pronk as nonworking. Those specific limitations qualify the broader movement descriptions in the parent overview. They also show why preserving the matching firmware matters when choosing a demonstration to reproduce. No gait or startup calibration was tested here. [1] [5]

The parent project has an MIT notice, but the separate firmware repositories, nested libraries and externally hosted CAD need their own license and revision reconciliation. A build or support offer remains dependent on a chosen electrical configuration, complete fabrication sources, resolved dependencies and measured setup and repair work. [3] [4] [5] [6] [8]

What we checked

Source research only; no installation, physical build or performance test performed. No affiliate links added.

Not yet established

  • Requirements: operating system, host computer
  • A step-by-step setup summary

Updates

Upstream last updated
May 25, 2019 [2]
Latest release
May 25, 2019 [2]
Profile updated
Oct 25, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
b38b8e007da95f56637339e99ad2ab37e806097b (release 1.0) · combined hardware and software repository

Source files and licenses

Available project sources support research coverage; complete build and commercial qualification remain separate.

LayerAvailability / license
mechanical designavailable · License not fully assessed
Contributor parts collection preserved; full Autodesk assembly and exact release matching unresolved. Root MIT notices do not settle all external CAD provenance. [4] [7] [8]
electronicsavailable · License not fully assessed
Wiring illustration and BOM available; this is not complete purchased-board manufacturing source. [1] [4] [7]
firmwareavailable · License not fully assessed
Exact Doggo and ODrive gitlinks preserved; nested libraries and file-level licenses not fully reconciled. [5] [6]
softwareavailable · MIT
Parent repository notice; does not automatically cover separate firmware repositories or external CAD. [3] [4]
documentationavailable · MIT
Parent documentation; separately hosted BOM rights not inferred. [1] [3]

Reviewed historical control route selects no learned policy or dataset.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

Project sources

Videos

  • S010 Stanford Doggo Coaxial Mechanism (YouTube video)
    Video uploaded by Nathan, linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video Nathan · youtube.com · Accessed Oct 4, 2026

  • S011 Stanford Doggo Backflip (YouTube video)
    Video uploaded by Nathan, linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video Nathan · youtube.com · Accessed Oct 4, 2026

  • S012 Stanford Doggo ICRA Submission Video (YouTube video)
    Video uploaded by Nathan, linked from the project’s own documentation. Not reviewed by us for accuracy.
    Revision, date & where cited

    YouTube video Nathan · youtube.com · Accessed Oct 4, 2026

Correction guidance · Discussion is not enabled · Profile format 0.5.0-draft.1

Change history

2026-10-04 — Added 3 YouTube reference(s) (S010, S011, S012): official channel or videos linked from the pinned upstream sources. Existing claims, source-check dates and evidence are unchanged.

2026-10-25 — Added an attributed upstream image with linked reuse terms; technical evidence dates unchanged.