Open Source RoboticsRobots, software & learning

Yale OpenHand

End effector

A family of adaptive hands with shared CAD parts and a separate Dynamixel control repository. [1]

Build & first use →Official website

For
Research builders evaluating end-effector fabrication and integration [1]
Cost
No current cost or bill of materials established yet.
Source rights
Named licenses are documented by part. Includes noncommercial terms. Review licenses
Unknowns
host computer, tools, operating system not fully established. Review gaps

Source researched · Not tested by us
Sources checked · Research details

Photograph of the Yale OpenHand Model T42 grasping a ball in the authors’ 2019 experiment; cropped from Figure 12(E). The attached UR5 arm is separate equipment.
Photograph of the Yale OpenHand Model T42 grasping a ball in the authors’ 2019 experiment; cropped from Figure 12(E). The attached UR5 arm is separate equipment. Che-Ming Chang, Lucas Gerez, Nathan Elangovan, Agisilaos Zisimatos and Minas Liarokapis · CC-BY-4.0. Embedded image extracted from page 10 of the source PDF and losslessly decoded to PNG; no retouching. Cropped to isolate the Model T42 holding a ball in the leftmost photograph of Figure 12(E); full extracted image retained.
Licenses & related hardware
License
CC-BY-NC-3.0 (noncommercial) · Details by part

Requirements · Research details and dates

On this page

Is this for you?

Known limitations
  • One exact model BOM, hardware/control revision relationship, current fabrication supplies and compatible arm adapter remain unresolved.
  • No physical assembly, calibration, performance or support qualification performed.

Source review and explicit limits of this work.

[1] [2] [3] [4] [5] · Editorial assessment

What you need

Dependencies
  • Model-dependent Dynamixel servos, U2D2, external motor supply, printed parts, tendons and finger materials; choose one model before quantities.

[1] [2] [3] [4] [5]

Hardware & parts

Hardware configuration

Adaptive grippers

Editorial grouping from hardware design.

[1] · Editorial assessment

Assembly & first use

Project documentation [1]

Assembly

Choose model and finger construction, resolve shared SolidWorks parts/configurations, follow fabrication guide, configure servo IDs and check model-specific travel.

Research synopsis of upstream route; not independently executed instructions.

[1] [2] [3] [4] [5] · Editorial assessment

Cost

No current, complete configuration-specific build cost has been established for this profile.

3D preview

Preview not available yet. The reviewed design license includes a noncommercial restriction. The original design is linked; a hosted derivative needs a separate reuse decision.

Project notes

Configuration and sourcing

Model T uses one actuator for adaptive grasping; Model T42 uses two for planar manipulation and precision grasping. This profile compares the family rather than choosing a complete build. Flexure-joint fingers involve molded urethane, so the finger choice changes the fabrication route. [1]

Model-dependent Dynamixel servos, U2D2, external motor supply, printed parts, tendons and finger materials; choose one model before quantities. [1] [2] [3] [4] [5]

Choose model and finger construction, resolve shared SolidWorks parts/configurations, follow fabrication guide, configure servo IDs and check model-specific travel. [1] [2] [3] [4] [5]

Integration

The control README supports T, T42 and O. Standalone Python control uses numpy, scipy and pyserial; the upstream-tested versions are Python 2.7 and 3.6. The documented ROS path uses ROS Kinetic with Python 2. These are historical documented environments, not verified current compatibility. U2D2 supplies communication, not motor power. [1] [2] [3] [4] [5]

What we checked

Source research only. No hardware assembly, performance testing, procurement or support qualification performed.

Not yet established

  • Requirements: operating system, host computer, tools
  • A step-by-step setup summary

Updates

Upstream last updated
Not established
Latest release
Not established
Profile updated
Oct 26, 2026
Sources last checked
Sep 30, 2026
Next review
Oct 30, 2026
Reviewed revision
b10197dcd79e7bcfa92c6d5a0bfa479e6a789fba; Family indexed together; Model T42 is a possible two-actuator review scope, not a selected build

Source files and licenses

Source-researched component coverage; complete build, commercial rights and performance qualification remain separate.

LayerAvailability / license
mechanical designavailable · CC-BY-NC-3.0
Hardware CC BY-NC 3.0; separate openhand_node control repository MIT. [1] [2] [3] [4] [5]
electronicsnot found · License not fully assessed
Inspected sources do not establish a complete revision-matched source set for this layer. This finding does not mean the purchased components are closed source. [1] [2] [3] [4] [5]
firmwarenot found · License not fully assessed
Inspected sources do not establish a complete revision-matched source set for this layer. This finding does not mean the purchased components are closed source. [1] [2] [3] [4] [5]
softwarenot found · License not fully assessed
Inspected sources do not establish a complete revision-matched source set for this layer. This finding does not mean the purchased components are closed source. [1] [2] [3] [4] [5]
documentationavailable · CC-BY-NC-3.0
Hardware CC BY-NC 3.0; separate openhand_node control repository MIT. [1] [2] [3] [4] [5]

This configuration is reviewed as a physical end effector with ordinary control, without a selected learned policy or dataset.

Design limits and source rights

One exact model BOM, hardware/control revision relationship, current fabrication supplies and compatible arm adapter remain unresolved. [1] [2] [3] [4] [5]

The hardware uses CC BY-NC 3.0, with attribution and a noncommercial restriction; commercial reuse requires a separate permission basis. The separate openhand_node control repository uses MIT, requiring its copyright and permission notice to be retained. Those licenses do not establish source rights for the purchased components. [1] [2] [3] [4] [5]

This is a source-researched design profile. We have not assembled or tested this configuration; no complete current setup price is established.

References

Each source links to the exact revision we read. “Used for” shows where this page relies on it.

  • S001 grablab/openhand-hardware: README.md
    Revision, date & where cited

    github.com · revision b10197d · Accessed Sep 30, 2026


    Used for: Is this for you?, What you need, Hardware & parts, Assembly & first use and 3 more
  • S002 grablab/openhand-hardware: LICENSE.md
    Revision, date & where cited

    github.com · revision b10197d · Accessed Sep 30, 2026


    Used for: Is this for you?, What you need, Assembly & first use, Configuration and sourcing and 2 more
  • S003 grablab/openhand-hardware: files
    Revision, date & where cited

    github.com · revision b10197d · Accessed Sep 30, 2026


    Used for: Is this for you?, What you need, Assembly & first use, Configuration and sourcing and 2 more
  • S004 control
    Revision, date & where cited

    github.com · revision a7feecf · Accessed Sep 30, 2026


    Used for: Is this for you?, What you need, Assembly & first use, Configuration and sourcing and 2 more
  • S005 control_license
    Revision, date & where cited

    github.com · revision a7feecf · Accessed Sep 30, 2026


    Used for: Is this for you?, What you need, Assembly & first use, Configuration and sourcing and 2 more
  • S006 Upstream image and reuse attribution
    Media-only review: Photograph of the Yale OpenHand Model T42 grasping a ball in the authors’ 2019 experiment; cropped from Figure 12(E). The attached UR5 arm is separate equipment. Reuse basis: CC-BY-4.0. The existing profile indexes the OpenHand family and identifies T42 as a possible review scope, not a selected build. The paper explicitly identifies Figure 12(E) as the Yale Model T42 and describes its own UR5-mounted comparison experiment, rather than crediting this photograph as a third-party reprint. The photographed T42 is the two-finger articulated hand with orange body, black joints and compliant pads, distinct from the paper’s alternative grippers in rows A-D. The caption identifies the historical 2019 experimental configuration; no claim of an exact later CAD revision or selected build. Actual full figure, embedded PDF image and crop visually inspected; no AI editing. The paper’s copyright statement links CC BY 4.0. Embedded image extracted from page 10 of the source PDF and losslessly decoded to PNG; no retouching. Cropped to isolate the Model T42 holding a ball in the leftmost photograph of Figure 12(E); full extracted image retained. Technical/cost evidence dates unchanged.
    Revision, date & where cited

    Che-Ming Chang, Lucas Gerez, Nathan Elangovan, Agisilaos Zisimatos and Minas Liarokapis · frontiersin.org · On Alternative Uses of Structural Compliance for the Development of Adaptive Robot Grippers and Hands, DOI 10.3389/fnbot.2019.00091, page 10, Figure 12(E), leftmost photograph; image SHA-256 5d39e622288c8768d5abcba73c31196728ba0e58ad2c658757555794ace134cc · Accessed Oct 26, 2026

Correction guidance · Discussion is not enabled · Profile format 0.6.0-draft.1

Change history

2026-09-30 — Deep source acquisition, licensing and configuration review in isolated end-effector research staging.

2026-09-30 — Classified in the end-effector hierarchy with cited mechanism and platform evidence; build and rights limitations retained.

2026-10-26 — Added attributed upstream media with linked reuse terms; technical evidence dates unchanged.